10-K 1 irbt-12282013x10k.htm 10-K IRBT-12.28.2013-10K
 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
(Mark One)
þ
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 28, 2013
OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission file no. 000-51598
iROBOT CORPORATION
(Exact name of registrant as specified in its charter)
Delaware
 
77-0259 335
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification No.)
8 Crosby Drive, Bedford, MA
 
01730
(Address of principal executive offices)
 
(Zip Code)
(781) 430-3000
(Registrant’s telephone number, including area code)
_______________________________________________ 
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT:
Common Stock, $0.01 par value per share        The NASDAQ Stock Market LLC
SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT:
None
Indicate by check-mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  þ        No  ¨
Indicate by check-mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨        No  þ
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ        No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  þ        No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer
þ
Accelerated filer
¨
Non-accelerated filer
¨
Smaller reporting company 
¨
 
 
 
 
(Do not check if a smaller
reporting company)
 
 
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨        No  þ
The aggregate market value of the Common Stock held by nonaffiliates of the registrant was approximately $1,100,000,000 based on the last reported sale of the Common Stock on the NASDAQ Global Market on June 29, 2013.
As of February 10, 2014, there were 29,020,961 shares of the registrant’s Common Stock outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
The registrant intends to file a definitive Proxy Statement pursuant to Regulation 14A within 120 days of the end of the fiscal year ended December 28, 2013. Portions of such Proxy Statement are incorporated by reference into Part III of this Form 10-K.
 




iROBOT CORPORATION
ANNUAL REPORT ON FORM 10-K
Year Ended December 28, 2013
TABLE OF CONTENTS
 
 
 
Page
 
Part I
 
Item 1.
Item 1A.
Item 1B.
Item 2.
Item 3.
Item 4.
 
 
 
 
Part II
 
Item 5.
Item 6.
Item 7.
Item 7A.
Item 8.
Item 9.
Item 9A.
Item 9B.
 
 
 
 
Part III
 
Item 10.
Item 11.
Item 12.
Item 13.
Item 14.
 
 
 
 
Part IV
 
Item 15.


2


PART I
 

ITEM 1.    BUSINESS
This Annual Report on Form 10-K contains forward-looking statements. All statements other than statements of historical facts contained in this Annual Report on Form 10-K, including statements regarding our future results of operations and financial position, business strategy, plans and objectives of management for future operations, and plans for product development and manufacturing are forward-looking statements. These statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. We discuss certain of these risks in greater detail in the “Risk Factors” section and elsewhere in this Annual Report on Form 10-K. Also, these forward-looking statements speak only as of the date of this Annual Report on Form 10-K, and we have no plans to update our forward-looking statements to reflect events or circumstances occurring after the date of this Annual Report. We caution readers not to place undue reliance upon any such forward-looking statements.
iRobot, Roomba, Scooba, PackBot, Warrior, FirstLook, Looj, Verro, Virtual Wall, Home Base, Aware, Mint, AeroVac, Mirra, Braava and AeroForce are trademarks of iRobot Corporation.

Overview
iRobot Corporation (“iRobot” or the “Company” or “we”) designs and builds robots that make a difference. For over 20 years, we have developed proprietary technology incorporating advanced concepts in navigation, mobility, manipulation and artificial intelligence to build industry-leading robots. Our home care robots perform time-consuming domestic chores while our defense and security robots perform tasks such as battlefield reconnaissance and bomb disposal, and multi-purpose tasks for local police and first responders, as well as certain commercial users. Our remote presence robots expand the reach of medical care by connecting physicians with patients from anywhere in the world and also provide autonomous telepresence capabilities enabling remote workers to more personally collaborate throughout the workplace. We sell our robots through a variety of distribution channels, including chain stores and other national retailers, through our on-line store, through value added distributors and resellers, and to the U.S. military and other government agencies worldwide.
Since our founding, we have accumulated expertise in all the disciplines necessary to design and build durable, high-performance and cost-effective robots through the close integration of software, electronics and hardware. Our core technologies serve as reusable building blocks that we adapt and expand to develop next generation and new products, reducing the time, cost and risk of product development. Our significant expertise in robot design and engineering, combined with our management team's experience in consumer, military and enterprise markets, positions us to capitalize on the growth we expect in the market for robot-based products. We believe that the sophisticated technologies in our existing applications are adaptable to a broad array of markets such as law enforcement, homeland security, commercial cleaning, elder care, energy services, home automation, healthcare, video collaboration, landscaping, agriculture, construction and other vertical markets.
Over the past eleven years, we have sold more than 11 million of our home care robots. During that time, we also sold more than 5,000 of our tactical military robots, most of which have been sold to the U.S. military and deployed on missions in Afghanistan and Iraq, and more recently to state, local and international government entities. During 2013, we sold 80 remote presence telemedicine robots to InTouch Health for resale into the healthcare market as part of our joint development collaboration with InTouch Health.
Our business continued to evolve in fiscal 2013. Total revenue for 2013 was $487.4 million, which represented a 12% increase over 2012 revenue of $436.2 million. This increase in revenue was largely attributable to a $71.0 million increase in revenue in our home robots business as a direct result of growth in both domestic and international markets. The increase in home robots revenue was partially offset by a decrease in revenue of $20.9 million in our defense and security business related to continued troop withdrawals in Afghanistan, program cancellations and ongoing budget reductions within the U.S. government. We began selling our remote presence robots into the healthcare market in 2013, however, these sales did not generate meaningful revenue in 2013. Our home robots revenue represented 88% of our total 2013 revenue compared to 82% in 2012. We anticipate that our revenue for the next few years will be primarily driven by our rapidly growing home technology business and that our home robots revenue will comprise approximately 90% of our total revenue in the near term.
We achieved a number of significant milestones in 2013 which we believe will assist us in continuing to generate profitable growth in 2014 and beyond. In particular:

We began fully operating under the company-wide restructuring that was initiated in 2012. This restructuring was designed to provide us greater overall flexibility, improved efficiency and scalability as a more unified organization.

3


In conjunction with this restructuring, we created centralized, shared services such as finance, operations and engineering to promote further the use of common platforms and repeatable successes through improved collaboration and standardization while focusing efforts on markets with the greatest visibility and revenue potential.
We announced the Ava 500 Video Collaboration robot which blends our autonomous navigation capabilities with Cisco’s TelePresence to enable people working off-site to participate in meetings and presentations where movement and location spontaneity are important. The Ava 500 is targeted for availability from select Cisco partners in the first half of 2014.
We introduced and began shipping the Roomba 800 series in late 2013. This next generation floor vacuuming robot incorporates new dirt extractor technology which amplifies suction for superior performance over traditional bristle brushes.
We completed development of the Scooba 450, our newest wet floor scrubbing robot. The Scooba 450 was introduced and began shipping in January 2014.
We continued to increase our investment in marketing programs in our home robots business, which resulted in greater brand awareness and revenue growth in that business.
We began shipping RP-VITA through InTouch Health into the healthcare market. The RP-VITA is the first autonomous navigation remote presence robot to receive U.S. Food and Drug Administration clearance for use in hospitals and combines the latest in autonomous navigation and mobility technologies developed by iRobot with the state-of-the-art telemedicine and electronic health record integration developed by InTouch Health.
We successfully integrated the operations of Evolution Robotics, Inc., developer of the Mint and Mint Plus automatic floor cleaning robots, which we acquired in October 2012. This acquisition expanded our technology leadership through a combination of intellectual property, engineering talent and new products that will broaden our global portfolio of practical robotics solutions. During 2013, we re-launched the Mint robot as Braava in Europe and the United States and reduced the overall cost to produce these robots upon completing the transition of supply chain management and manufacturing to iRobot.
Strategy
Our goal is to design and market innovative robots that make a difference and are adaptable for use in a broad range of applications. We strive to drive innovation, serve as an industry catalyst and change the world by fueling the era of robots. We intend to increase the penetration of our products in existing markets, expand existing products into new markets, and develop and launch new products into current and adjacent markets. Our strategy is to maintain a leadership position by delivering robotic technology-based remote presence and automated home maintenance solutions that delight our customers and anticipate their needs, while extending our technical leadership in the areas of autonomous navigation, manipulation and cloud connectivity and services. With increasing levels of autonomy, continued mobility improvements, more sophisticated sensor suites and advanced human interfaces, remote presence systems will expand in effectiveness and efficiency and reduce the requirements for actual physical operator presence and control. In the area of automated home maintenance, we seek to improve the quality of life with robotic solutions requiring as little human physical intervention as possible. Key elements of our strategy include:
Leverage Common Platforms and Software.    By committing long-term to a given platform and providing incremental upgrades, we create a valuable installed base that supports third-party development and greatly simplifies service and support. When entering new product areas that cannot be serviced with existing platforms, we intend to develop a multi-generational platform strategy that allows for rapid learning and long-term incremental improvements. Through the use and development of a common software architecture, we intend to create a robot intelligence system of enduring value and build a competitive advantage. Our common software will allow high reuse, reducing development costs of new systems and payloads, as well as reducing development timelines.
Continued Growth through Profitability, Operational Excellence and Customer Focus.     We intend to pursue opportunities to improve our profitability through disciplined allocation of resources and by reducing costs of materials, adjusting prices, optimizing our product and channel mix and focusing on our discretionary spending. We will continue to focus on improving the scalability and efficiency of our supply chain process and on mitigating single source supply exposure. We will identify, develop and enhance product features and functionality while also aggressively focusing on product reliability.
Product Portfolio Management.    We will strive to find the appropriate balance between delivering near-term profitable growth and investing in innovation that will ensure our sustained leadership position and pave the way for new growth opportunities. We will maintain a portfolio of products and technologies that serve a variety of markets and actively manage this portfolio in a manner that balances core businesses that deliver short term profitability, emerging businesses that are showing promise by gaining footholds in their respective markets and future businesses that are unproven but represent opportunities for future growth and expansion. In managing our product portfolio, we will seek markets that present large

4


revenue and profit opportunities, sustain high growth, have significant strategic alignment, and leverage our brand and core capabilities in technology, operations, distribution and support.
Leverage Research and Development Across Different Products and Markets.    We leverage our research and development across all of our products and markets. For example, we use technological expertise developed through government-funded research and development projects across our other product development efforts. Similarly, expertise developed while designing consumer products is used in designing products for defense and security applications. This strategy helps us avoid the need to start each robot project from scratch, developing robots in a cost-effective manner and minimizing time to market.
Continue to Strengthen Our Brand.    Our robots' performance and uniqueness have enabled us to obtain strong word-of-mouth and extensive press coverage leading to increasing brand awareness, brand personality and momentum. We intend to increase our investment in our marketing programs to strengthen our brand recognition and reinforce our message of innovation, reliability, safety and value.
Complement Core Competencies with Strategic Alliances.    Our core competencies are the design, development and marketing of robots. We rely on strategic alliances to provide complementary competencies that we integrate into our products and to enhance market access. We outsource certain non-core activities, such as manufacturing and back-office functions, which helps us focus our resources on our core competencies.
Technology
We are focused on behavior-based, artificially-intelligent systems developed to meet customer requirements in multiple market segments. In contrast to robotic manufacturing equipment or entertainment systems that are designed to repeat actions in specific, known environments, our systems are designed to complete missions in complex and dynamic real-world environments.
Our robots rely on the interplay among behavior-based artificially intelligent systems, real-world dynamic sensors, user-friendly interfaces and tightly-integrated, electromechanical designs to accomplish their missions efficiently.
Real-World, Dynamic Sensing.    The degree of intelligence that our robots display is directly attributable to their ability to perceive - or sense - the world around them. Using specialized hardware and signal processing, we have developed sensors that fit particular cost-performance criteria. In other cases, we use off-the-shelf sensing hardware, such as laser scanners, cameras and optical sensors.
User-Friendly Interfaces.    Our robots allow users to interact and instruct our robots in intuitive ways without extensive end-user set-up, installation, training or instruction. For example, our Roomba robots require only one button to have the robot begin its mission, determine the size of the room to be cleaned, thoroughly clean the room and return to its re-charger, right out of the box without any pre-programmed knowledge of the user's home. Similarly, our PackBot robots use intuitive controllers, interoperable between systems, that integrate high-level supervisory commands from the user into the behaviors of the robot.
Tightly-Integrated, Electromechanical Design.    Our products rely on our ability to build inherently robust integrated electrical and mechanical components into required form factors. For instance, the computer that powers the PackBot tactical military robot must withstand being dropped from more than ten feet onto concrete. Such high performance specifications require tight design integration.
AWARE Robot Intelligence Systems.    Our proprietary AWARE Robot Intelligence Systems are code bases that enable the behavioral control of robots. Moreover, the AWARE systems include modules that control behaviors, sensor fusion, power management and communication. Our AWARE systems allow our Roomba floor vacuuming robot and our Scooba floor washing robot to clean an entire floor while navigating around obstacles and not falling down stairs, and also allow our PackBot robots and our other unmanned ground vehicles to accomplish complex missions such as waypoint navigation and real-time obstacle avoidance.
Combining these four components, we have created proprietary, reusable building blocks of robotics capabilities, including mobility platforms, manipulators, navigation and control algorithms and user interfaces. Our technology building blocks typically allow us to take a known platform and modify it for a new mission instead of starting from scratch for each application. We believe this allows us to design and develop innovative robots cost-effectively.
Products and Development Contracts
We design and market robots for the consumer, and defense and security, telemedicine, and video collaboration markets. With two decades of leadership in the robot industry, we remain committed to establishing robot and software platforms for invention and discovery, building key partnerships to develop mission-critical payloads and creating robots that improve the standards of safety and living worldwide.

5


Consumer Products
We sell various products that are designed for use in and around the home. Our current consumer products are focused on both indoor and outdoor cleaning applications. We believe our consumer products provide value to our customers by delivering better cleaning solutions at an affordable price and by freeing people from repetitive home cleaning tasks.
We currently offer multiple Roomba floor vacuuming robots with varying price points ranging from $299 to $699 based upon performance characteristics. Our Roomba robot's compact disc shape allows it to clean under beds and other furniture, resulting in cleaner floors since the Roomba can access more of the floor than standard upright vacuum cleaners. In addition, Roomba eliminates the need to push a vacuum - it cleans automatically upon the push of a button. In 2013, we introduced the Roomba 800 series robots which incorporate new brushless, counter-rotating extractors that amplify suction for superior performance over bristle brushes, while requiring less maintenance than previous Roomba models. The Roomba 700 series robots, introduced in 2011, offers improved debris pick up, a larger debris bin that vigorously pulls debris and hair off brushes into the bin, and dual HEPA air filters that capture dust particles as fine as 0.3 microns. The Roomba 600 series robots, introduced in 2012, offers a three-stage cleaning system which thoroughly vacuums every section of the floor multiple times, as well as AeroVac technology and improved brush design enabling the robot to better handle fibers like hair, pet fur, lint and carpet fuzz.
As a result of our acquisition of Evolution Robotics, Inc., we currently offer two Braava automatic floor mopping robots designed exclusively for hard surface floors with prices ranging from $199 to $299 based upon performance features. These robots provide a different cleaning approach than our Roomba products. The Braava 320 automatically dusts and damp mops hard surface floors using popular cleaning cloths or our specially designed reusable microfiber cloths. In addition to these features, the Braava 380t includes a special reservoir that dispenses liquid throughout the cleaning cycle to keep the cloth damp.
In January 2014, we introduced the Scooba 450 floor scrubbing robot with a price point of $599. Unlike a conventional mop that spreads dirty water on the floor, Scooba will apply only fresh water and cleaning solution to the floor from a clean tank. Scooba will clean dirt and grime, is safe for use on all sealed, hard floor surfaces, including wood and tile, and is smart enough to avoid carpet. The Scooba 450 uses the new Scooba Three-Cycle Cleaning Process which automatically sweeps and pre-soaks, scrubs and finishes with a final squeegee while washing away bacteria.
 
Our Mirra Pool Cleaning Robot is used to clean residential pools and removes debris as small as two microns from pool floors, walls and stairs. Mirra is brought to market under the iRobot brand through a relationship with Aquatron, Inc., which developed the pool cleaning robots. Our Looj Gutter Cleaning Robot was designed to simplify the difficult and dangerous job of gutter cleaning. The Looj cleans an entire stretch of gutter, reducing the number of times a ladder must be repositioned and climbed during gutter cleaning. The Looj also features a detachable handle that doubles as a wireless remote control, providing full control of the robot while cleaning.
Defense and Security Products
In defense and security product markets, we currently offer several ground unmanned vehicles. Our tactical ground robots include the combat-tested 510 PackBot line of small, unmanned ground robots, the SUGV (Small Unmanned Ground Vehicle) multi-purpose ground robots, the 110 FirstLook small, light, throwable robot, and the 710 Warrior multi-purpose robot capable of carrying heavy payloads. The PackBot, SUGV, FirstLook, and Warrior robots comprise a family of robots using many common platform components and offer our patented flipper technology that enables robots to easily climb stairs, navigate rubble, and penetrate inaccessible areas. These robots are designed to keep war fighters and public safety officials out of harm's way and are designed for high-performance, durability and ease of use while performing search, reconnaissance, mapping, bomb disposal and other dangerous missions. As of December 28, 2013, more than 5,000 robots have been delivered to military and civil defense forces and research communities worldwide. The robots are currently priced between approximately $20,000 and $600,000 per unit, depending on configuration and quantities ordered.
We continue to refine the PackBot product line, focusing on enhanced modularity and providing new capabilities to support a variety of mission scenarios. Our unique Aware 2 software is incorporated into the advanced 510 PackBot chassis and operator control unit. As a result, PackBot can support multiple configurations and payloads with the same chassis and operator control unit, providing customers with a single robot capable of performing a variety of missions. We also utilize Configure-To-Order (CTO) procurement options for our commercial 510 PackBot, allowing customers to tailor the product to their specific mission needs. The combined benefits of the Aware 2 software and CTO procurement options establish the 510 PackBot as a truly modular multi-mission robotic platform.
The 310 and XM1216 SUGVs are a family of lightweight, backpackable robots well suited to dismounted operations in Afghanistan. The SUGV has a modular design that accommodates a wide range of optional payloads and sensors, including a dexterous manipulator, and can easily climb stairs, roll over obstacles and enter inaccessible and dangerous areas.

6


Remote Presence Products
We currently have two products based upon our Ava mobile robotics platform. The U.S. Federal Drug and Administration approved RP-VITA telemedicine robot expands the reach of medical care by connecting physicians with patients from anywhere in the world. The RP-VITA combines the latest in autonomous navigation and mobility technologies developed by iRobot with the state-of-the-art telemedicine and electronic health record integration developed by InTouch Health. The RP-VITA, which is sold to healthcare customers by InTouch Health, was introduced in 2012 and began shipping in early 2013. Our Ava 500 Video Collaboration robot, announced in 2013, delivers autonomous telepresence to the enterprise market, enabling remote workers to more personally collaborate throughout the workplace. The Ava 500, which is targeted for availability from select Cisco partners in the first half of 2014, blends together our autonomous navigation capabilities with Cisco’s TelePresence to enable people working off-site to participate in meetings and presentations where movement and location spontaneity are important.
Contract Research and Development Projects
We have historically been involved in contract development projects with various U.S. governmental agencies and departments with project durations ranging from a few months to several years. These projects are usually funded as either cost-plus, firm fixed price, or time and materials contracts. We have decided to refocus our funded research activities, and have become less reliant on these contract research and development projects in recent years, which represented 2%, 4% and 8% of our total revenue for fiscal years 2013, 2012 and 2011, respectively.
Strategic Alliances
In addition to our internal technology development, we leverage relevant robotic technologies through licensing, acquisitions and/or other partnerships. These strategic alliances are an important part of our product development and distribution strategies. We rely on strategic alliances to provide technology, complementary product offerings and increased and quicker access to markets. We seek to form relationships with organizations that can provide best-in-class technology or market advantages for establishing iRobot technology in new market segments.
In 2011 we signed a joint development and licensing agreement with InTouch Health, a leading remote presence telemedicine solution provider, to explore potential opportunities for healthcare applications on iRobot platforms such as the iRobot Ava mobile robotics platform. This alliance resulted in the introduction in 2012 of the RP-VITA, the first autonomous navigation remote presence robot to receive U.S. Food and Drug Administration clearance for use in hospitals. The RP-VITA combines the latest in autonomous navigation and mobility technologies developed by iRobot with the state-of-the-art telemedicine and electronic health record integration developed by InTouch Health. Shipments of the RP-VITA began in early 2013.
In 2013, we signed a joint marketing agreement and are working in close alliance with Cisco to bring our enterprise-grade Ava 500 Video Collaboration robot to market. The Ava 500, which blends together our autonomous navigation capabilities with Cisco’s TelePresence to enable people working off-site to participate in meetings and presentations where movement and location spontaneity are important, is targeted for availability from select Cisco partners in the first half of 2014.
Our strategy of working closely with third parties extends to the design of our products. By offering extensible platforms designed to carry payloads, we have designed and manufactured our products to leverage the work of those individuals and organizations that offer specialized technological expertise. The PackBot, Warrior and FirstLook robots are designed with open interfaces that allow third-party developers to add payloads to our robots, improving their functionality.
Sales and Distribution Channels
We sell our products through distinct sales channels to the consumer, defense and security, telemedicine, and video collaboration markets. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, sales to non-U.S. customers accounted for 59.5%, 57.3% and 45.5% of total revenue, respectively. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, U.S. federal government orders, contracts and subcontracts accounted for 6.2%, 15.1% and 36.1% of total revenue, respectively. For the years ended December 28, 2013, December 29, 2012 and December 31, 2011, we generated an aggregate of 33.2%, 30.6% and 23.6% of our revenue, respectively from our home robots distributor in Japan (Sales on Demand Corporation) and a network of affiliated European distributors of our home robots. 

7


Home Robots
In the United States and Canada, we sell our consumer products through a network of national retailers. In 2013, this network consisted of more than 30 retailers which often sell either one or some combination of our products. Certain smaller domestic retail operations are supported by distributors to whom we sell our products directly. In support of sales in the United States and Canada, we maintain an in-house sales and product management team. Outside of the United States and Canada, our products have been sold in more than 40 countries, primarily through a network of in-country distributors who resell to retail stores in their respective countries. These distributors are supported by our international sales and product marketing team.
Our retail and distributor networks are our primary distribution channels for our consumer products. We also offer products direct-to-consumer through our domestic and international on-line stores, representing 5.9% and 6.3% of total home robots business unit revenue for fiscal 2013 and 2012, respectively. We have established valuable databases and customer lists that allow us to target directly those consumers most likely to purchase a new robot or upgrade. We believe we maintain a close connection with our customers in each of our markets, which provides an enhanced position from which to improve our distribution and product offerings.

Defense and Security
We sell our defense and security products directly to end users and indirectly through prime contractors and distributors. While the majority of defense and security products have been sold to date to various operations within the U.S. federal government, we also sell to state and local as well as to international government organizations and research labs and universities. Our military products are sold overseas in compliance with the International Traffic in Arms Regulations, or ITAR. We have sold our products to the governments of various countries in the past several years, including the United Kingdom, France, Germany, Sweden, Norway, Italy, Brazil, Pakistan, Israel, Australia, Republic of Korea, Singapore, Bosnia, Lithuania, Qatar, Taiwan, South Africa and Canada.
Remote Presence
The RP-VITA telemedicine robot, which was jointly developed with InTouch Health and incorporates our Ava mobile robotics platform, is sold to healthcare customers by InTouch Health. Our Ava 500 Video Collaboration robot, which was announced in 2013 and incorporates our Ava mobile robotics platform and Cisco’s TelePresence, will be available from certified Cisco partners in the first half of 2014.
Customer Service and Support
We also provide ongoing customer service and support. Consumer customer service representatives, the majority of whom are employees of outsourced service organizations or our distribution partners, are extensively trained on the technical intricacies of our consumer products. Defense and security customer representatives are usually former military personnel who are experienced in logistical and technical support requirements for military operations. Customer service for the RP-VITA product is provided by InTouch Health.
Marketing and Brand
We market our home robots to end-user customers through our sales and marketing teams as well as through our extensive network of retailers and in-country distributors. We market our defense and security products directly through our team of government sales specialists to end users and indirectly through prime contractors. The RP-VITA product is marketed to healthcare customers by InTouch Health while our Ava 500 Video Collaboration product is marketed to enterprise customers by a combination of our sales and marketing teams in conjunction with select Cisco partners. Our website is also playing an increasing role in supporting brand awareness, addressing customer questions and serving as a showcase for our products.
Our marketing strategy is to increase our brand awareness and associate the iRobot brand with innovation, reliability, safety and value. Our sales and marketing expenses represented 14.7%, 15.2% and 10.8% of our total revenue in 2013, 2012 and 2011, respectively. We expect to continue to invest in national advertising, consumer and industry trade shows, direct marketing and public relations to further build brand awareness.
We believe that we have built a trusted, recognized brand by providing high-quality robots. We believe that customer word-of-mouth has been a significant driver of our brand's success to date, which can work very well for products that inspire a high level of user loyalty because users are likely to share their positive experiences. Our grass-roots marketing efforts focus on feeding this word-of-mouth momentum and we use public relations as well as advertising to promote our products.
Our innovative robots and public relations campaigns have generated extensive press coverage. In addition, iRobot and our consumer robots have won several awards and our inclusion among the first-tier partners on the U.S. Army's Brigade Combat Team Modernization program has greatly enhanced our brand and awareness among defense and security customers. Through these efforts, we have been able to build our brand, and we expect that our reputation for innovative products and customer support will continue to play a significant role in our growth and success.

8


Manufacturing
Our core competencies are the design, development and marketing of robots. Our manufacturing strategy is to outsource non-core competencies, such as the production of our robots, to third-party entities skilled in manufacturing. By relying on the outsourced manufacture of our consumer, military and remote presence robots, we can focus our engineering expertise on the design of robots.
 
Manufacturing a new product requires a close relationship between our product designers and the manufacturing organizations. Using multiple engineering techniques, our products are introduced to the selected production facility at an early-development stage and the feedback provided by manufacturing is incorporated into the design before tooling is finalized and mass production begins. As a result, we believe that we can significantly reduce the time required to move a product from its design phase to mass production deliveries, with improved quality and yields.
We outsource the manufacturing of our consumer products to six contract manufacturers, each of which manufactures at a single plant in China. We outsource the manufacturing of our defense and security robots to three contract manufacturers, all of which are located in the United States. We outsource our remote presence robots to one contract manufacturer located in the United States.
Research and Development
We believe that our future success depends upon our ability to continue to develop new products and product accessories, and enhancements to and applications for our existing products. For the years ended December 28, 2013, December 29, 2012 and December 31, 2011, our research and development expenses were $63.6 million, $57.1 million and $60.1 million, respectively. We intend to continue our investment in research and development to respond to and anticipate customer needs, and to enable us to introduce new products over the next few years that will continue to address our existing and adjacent market sectors.
Our research and development is conducted by teams dedicated to particular projects. Our research and development efforts are primarily located at our headquarters in Bedford, Massachusetts and our office in Pasadena, California.
Competition
The market for robots is highly competitive, rapidly evolving and subject to changing technologies, shifting customer needs and expectations and the likely increased introduction of new products. We believe that a number of established companies have developed or are developing robots that will compete directly with our product offerings, and many of our competitors have significantly more financial and other resources than we possess.
 
Our competitors include developers of robot floor cleaning products, developers of small unmanned ground vehicles, and developers of mobile robotic platforms and telepresence systems.
While we believe many of our customers purchase our Roomba floor vacuuming robots, Braava floor cleaning and Scooba floor washing robots as a supplement to, rather than a replacement for, their traditional vacuum cleaners and wet floor cleaning methods, we do compete in some cases with providers of traditional cleaning products.
We believe that the principal competitive factors in the market for robots include product features, performance for the intended mission, cost of purchase, total cost of system operation, including maintenance and support, ease of use, integration with existing equipment, quality, reliability, customer support, brand and reputation.
Our ability to remain competitive will depend to a great extent upon our ongoing performance in the areas of product development and customer support. We cannot provide assurance that our products will continue to compete favorably or that we will be successful in the face of increasing competition from new products and enhancements introduced by existing competitors or new companies entering the markets in which we provide products.
Intellectual Property
We believe that our continued success depends in large part on our proprietary technology, the intellectual skills of our employees and the ability of our employees to continue to innovate. We rely on a combination of patent, copyright, trademark and trade secret laws, as well as confidentiality agreements, to establish and protect our proprietary rights.
As of December 28, 2013, we held 232 U.S. patents, 229 foreign patents, additional design registrations, and more than 400 patent applications pending worldwide. Our U.S. patents will begin to expire in 2019. We will continue to file and prosecute patent (or design registration, as applicable) applications when and where appropriate to attempt to protect our rights in our proprietary technologies. We also encourage our employees to continue to invent and develop new technologies so as to maintain our competitiveness in the marketplace. It is possible that our current patents, or patents which we may later acquire, may be successfully challenged or invalidated in whole or in part. It is also possible that we may not obtain issued patents for our pending patent applications or other inventions we seek to protect. In that regard, we sometimes permit certain intellectual

9


property to lapse or go abandoned under appropriate circumstances and due to uncertainties inherent in prosecuting patent applications, sometimes patent applications are rejected and we subsequently abandon them. It is also possible that we may not develop proprietary products or technologies in the future that are patentable, or that any patent issued to us may not provide us with any competitive advantages, or that the patents of others will harm or altogether preclude our ability to do business.
Our registered U.S. trademarks include iRobot, Roomba, Scooba, Mint, ViPR, NorthStar, iRobot Dirt Dog, Create, PackBot, FirstLook, iAdapt, FasTac, Aware, Home Base, Looj, Verro, Virtual Wall, Warrior, Mirra, Braava and AeroForce. Our marks iRobot, Roomba, Scooba, and certain other trademarks, have also been registered in selected foreign countries.
Our means of protecting our proprietary rights may not be adequate and our competitors may independently develop technology that is similar to ours. Legal protections afford only limited protection for our technology. The laws of many countries do not protect our proprietary rights to as great an extent as do the laws of the United States. Despite our efforts to protect our proprietary rights, unauthorized parties have in the past attempted, and may in the future attempt, to copy aspects of our products or to obtain and use information that we regard as proprietary. Third parties may also design around our proprietary rights, which may render our protected products less valuable, if the design around is favorably received in the marketplace. In addition, if any of our products or the technology underlying our products is covered by third-party patents or other intellectual property rights, we could be subject to various legal actions. We cannot assure you that our products do not infringe patents held by others or that they will not in the future. We have received in the past communications from third parties relating to technologies used in our various robot products that have alleged infringement of patents or violation of other intellectual property rights. In response to these communications, we have contacted these third parties to convey our good faith belief that we do not infringe the patents in question or otherwise violate those parties' rights. Although there have been no additional actions or communications with respect to these allegations, we cannot assure you that we will not receive further correspondence from these parties, or not be subject to additional allegations of infringement from others. Litigation may be necessary to enforce our intellectual property rights, to protect our trade secrets, to determine the validity and scope of the proprietary rights of others, or to defend against claims of infringement or invalidity, misappropriation, or other claims. Any such litigation could result in substantial costs and diversion of our resources. Moreover, any settlement of or adverse judgment resulting from such litigation could require us to obtain a license to continue to use the technology that is the subject of the claim, or otherwise restrict or prohibit our use of the technology. Any required licenses may not be available to us on acceptable terms, if at all. If we attempt to design around the technology at issue or to find another provider of suitable alternative technology to permit us to continue offering applicable software or product solutions, our continued supply of software or product solutions could be disrupted or our introduction of new or enhanced software or products could be significantly delayed.
Regulations
We are subject to various government regulations, including various U.S. federal government regulations as a contractor and subcontractor to the U.S. federal government. Among the most significant U.S. federal government regulations affecting our business are:
the Federal Acquisition Regulations and supplemental agency regulations, which comprehensively regulate the formation and administration of, and performance under government contracts;
the Truth in Negotiations Act, which requires certification and disclosure of all cost and pricing data in connection with contract negotiations;
the Cost Accounting Standards, which impose accounting requirements that govern our right to reimbursement under cost-based government contracts;
the Foreign Corrupt Practices Act, which prohibits U.S. companies from providing anything of value to a foreign official to help obtain, retain or direct business, or obtain any unfair advantages;
the False Claims Act and the False Statements Act, which, respectively, impose penalties for payments made on the basis of false facts provided to the government, and impose penalties on the basis of false statements, even if they do not result in a payment; and
laws, regulations and executive orders restricting the use and dissemination of information classified for national security purposes and the exportation of certain products and technical data.
We also need special security clearances to continue working on and advancing certain of our projects with the U.S. federal government. Classified programs generally will require that we comply with various Executive Orders, federal laws and regulations and customer security requirements that may include restrictions on how we develop, store, protect and share information, and may require our employees to obtain government clearances.
The nature of the work we do for the federal government may also limit the parties who may invest in or acquire us. Export laws may keep us from providing potential foreign acquirers with a review of the technical data they would be acquiring. In addition, there are special requirements for foreign parties who wish to buy or acquire control or influence over companies that control technology or produce goods in the security interests of the United States. There may need to be a review under the Exon-Florio provisions of the Defense Production Act. Finally, the government may require a prospective

10


foreign owner to establish intermediaries to actually run that part of the company that does classified work, and establishing a subsidiary and its separate operation may make such an acquisition less appealing to such potential acquirers.
In addition, the export from the United States of many of our products may require the issuance of a license by the U.S. Department of Commerce under the Export Administration Act, as amended, and its implementing Regulations as kept in force by the International Emergency Economic Powers Act of 1977, as amended. Some of our products may require the issuance of a license by the U.S. Department of State under the Arms Export Control Act and its implementing Regulations, which licenses are generally harder to obtain and take longer to obtain than do Export Administration Act licenses.
Our business may require the compliance with state or local laws designed to limit the uses of personal user information gathered online or require online services to establish privacy policies.
Defense and Security Product Backlog
Our defense and security product backlog consists of written orders or contracts to purchase our products received from our defense and security customers. Total backlog of product sales to defense and security customers, which includes federal, state, local and foreign governments, and non-government customers, as of December 28, 2013 and December 29, 2012 amounted to approximately $8.8 and $11.4 million, respectively. There can be no assurance that any of our backlog will result in revenue.
Employees
As of December 28, 2013, we had 528 full-time employees located in the United States and abroad. We believe that we have a good relationship with our employees.
Available Information
We were incorporated in California in August 1990 under the name IS Robotics, Inc. and reincorporated as IS Robotics Corporation in Massachusetts in June 1994. We reincorporated in Delaware as iRobot Corporation in December 2000. We conduct operations and maintain a number of subsidiaries in the United States and abroad, including operations in Hong Kong, the United Kingdom and China. We also maintain iRobot Securities Corporation, a Massachusetts securities corporation, to invest our cash balances on a short-term basis. Our website address is www.irobot.com. Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available free of charge through the investor relations page of our internet website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission. Alternatively, these reports may be accessed at the SEC’s website at www.sec.gov.

ITEM 1A.     RISK FACTORS
We operate in a rapidly changing environment that involves a number of risks, some of which are beyond our control. This discussion highlights some of the risks which may affect future operating results. These are the risks and uncertainties we believe are most important for you to consider. Additional risks and uncertainties not presently known to us, which we currently deem immaterial or which are similar to those faced by other companies in our industry or business in general, may also impair our business operations. If any of the following risks or uncertainties actually occurs, our business, financial condition and operating results would likely suffer.
Risks Related to Our Business
We operate in an emerging market, which makes it difficult to evaluate our business and future prospects.
Robots represent a new and emerging market. Accordingly, our business and future prospects are difficult to evaluate. We cannot accurately predict the extent to which demand for consumer robots will increase, if at all. Moreover, there are only a limited number of programs under which the U.S. federal government is currently funding the development or purchase of defense robots. Our remote presence robot business remains in an investment stage, where market demand is uncertain. You should consider the challenges, risks and uncertainties frequently encountered by companies using new and unproven business models in rapidly evolving markets. These challenges include our ability to:
generate sufficient revenue and gross margin to maintain profitability;
acquire and maintain market share in our consumer and defense markets;
attract and retain customers of our consumer robots;
attract and retain additional engineers and other highly-qualified personnel;
expand our product offerings beyond our existing robots; and
adapt to new or changing policies and spending priorities of governments and government agencies.

11


If we fail to successfully address these and other challenges, risks and uncertainties, our business, results of operations and financial condition would be materially harmed.
Our financial results often vary significantly from quarter-to-quarter due to a number of factors, which may lead to volatility in our stock price.
Our quarterly revenue and other operating results have varied in the past and are likely to continue to vary significantly from quarter-to-quarter in the future. These fluctuations may be due to numerous factors including:
the size, timing and mix of orders from retail stores and international distributors for our home care robots;
the size and timing of orders from military and other government agencies;
the mix of products that we sell in the period;
disruption of supply of our products from our manufacturers;
seasonality in the sales of our military and consumer products;
the inability to attract and retain qualified, revenue-generating personnel;
unanticipated costs incurred in the introduction of new products;
costs and availability of labor and raw materials;
costs of freight;
changes in our rate of returns for our consumer products;
our ability to introduce new products and enhancements to our existing products on a timely basis;
warranty costs associated with our consumer products;
the amount of government funding and the political, budgetary and purchasing constraints of our government agency customers; and
cancellations, delays or contract amendments by government agency customers.
We cannot be certain that our revenues will grow at rates that will allow us to maintain profitability during every fiscal quarter, or even every fiscal year. We base our current and future expense levels on our internal operating plans and sales forecasts, including forecasts of holiday sales for our consumer products. A significant portion of our operating expenses, such as research and development expenses, certain marketing and promotional expenses and employee wages and salaries, do not vary directly with sales and are difficult to adjust in the short term. As a result, if sales for a quarter are below our expectations, we might not be able to reduce operating expenses for that quarter and, therefore, we would not be able to reduce our operating expenses for the fiscal year. Accordingly, a sales shortfall during a fiscal quarter, and in particular the fourth quarter of a fiscal year, could have a disproportionate effect on our operating results for that quarter or that year. Because of quarterly fluctuations, we believe that quarter-to-quarter comparisons of our operating results are not necessarily meaningful. Moreover, our operating results may not meet expectations of equity research analysts or investors. If this occurs, the trading price of our common stock could fall substantially either suddenly or over time.
Global economic conditions and any associated impact on consumer spending could have a material adverse effect on our business, results of operations and financial condition.
Continued economic uncertainty and reductions in consumer spending, particularly in certain international markets such as the European Union, may result in reductions in sales of our consumer robots. Additionally, disruptions in credit markets may materially limit consumer credit availability and restrict credit availability of our retail customers, which would also impact purchases of our consumer robots. Any reduction in sales of our consumer robots, resulting from reductions in consumer spending or continued disruption in the availability of credit to retailers or consumers, could materially and adversely affect our business, results of operations and financial condition.
The majority of our business currently depends on our consumer robots, and our sales growth and operating results would be negatively impacted if we are unable to enhance our current consumer robots or develop new consumer robots at competitive prices or in a timely manner, or if the consumer robot market does not achieve broad market acceptance.
For the years ended December 28, 2013 and December 29, 2012, we derived 87.8% and 81.8% of our total revenue from our consumer robots, respectively. For the foreseeable future, we expect that a significant portion of our revenue will be derived from sales of consumer robots in general and home floor care products in particular. Accordingly, our future success depends upon our ability to further penetrate the consumer home care market, to enhance our current consumer products and develop and introduce new consumer products offering enhanced performance and functionality at competitive prices. The development and application of new technologies involve time, substantial costs and risks. Our inability to achieve significant sales of our newly introduced robots, or to enhance, develop and introduce other products in a timely manner, or at all, would materially harm our sales growth and operating results.

12


Even if consumer robots gain wide market acceptance, our robots may not adequately address market requirements and may not continue to gain market acceptance. If robots generally, or our robots specifically, do not gain wide market acceptance, we may not be able to achieve our anticipated level of growth, and our revenue and results of operations would suffer.

We depend on the U.S. federal government for a portion of our revenue, and any unexpected reduction in the amount of business that we do with the U.S. federal government would negatively impact our operating results and financial condition.
For the years ended December 28, 2013 and December 29, 2012, we derived 6.2% and 15.1% of our total revenue, respectively, directly or indirectly, from the U.S. federal government and its agencies. Further reduction in the amount of revenue that we derive from a limited number of U.S. federal government agencies without an offsetting increase in new sales to other customers would have a material adverse effect on our operating results.
Specifically, the defense industry in which we operate is dependent upon the level of equipment expenditures by the armed forces of countries throughout the world, and especially those of the United States, which represents a significant portion of world-wide defense expenditures.  In prior years, the war on terror increased the level of equipment expenditures by the U.S. armed forces; however, this level of spending does not appear to be sustainable in light of government spending priorities by the U.S. and the continued winding down of U.S. armed forces operations in Iraq and Afghanistan.
Future sales of our military robots will depend largely on our ability to secure contracts with the U.S. military under its robot programs. We expect that there will continue to be only a limited number of programs under which U.S. federal government agencies will seek to fund the development of, or purchase, robots. Moreover, it is difficult to predict the timing of the award of government contracts and our revenue could fluctuate significantly based on the timing of any such awards.
We depend on single source manufacturers, and our reputation and results of operations would be harmed if these manufacturers fail to meet our requirements.
We currently depend largely on several single source contract manufacturers, for the manufacture of our various families of home care and defense products. All contract manufacturers for our home robots are located in China. These manufacturers supply substantially all of the raw materials and provide all facilities and labor required to manufacture our products. If these companies were to terminate their arrangements with us or fail to provide the required capacity and quality on a timely basis, we would be unable to manufacture our products until replacement contract manufacturing services could be obtained or volume transferred to an alternative manufacturing partner, each of which is a costly and time-consuming process. We cannot assure you that we would be able to establish alternative manufacturing arrangements on acceptable terms or in a timely manner.
Our reliance on these contract manufacturers involves certain risks, including the following:
lack of direct control over production capacity and delivery schedules;
lack of direct control over quality assurance, manufacturing yields and production costs;
lack of enforceable contractual provisions over the production and costs of consumer products;
risk of loss of inventory while in transit;
risks associated with international commerce, including unexpected changes in legal and regulatory requirements, changes in tariffs and trade policies, risks associated with the protection of intellectual property and political and economic instability; and
our attempts to add additional manufacturing resources may be significantly delayed and thereby create disruptions in production of our products.
Any interruption in the manufacture of our products would be likely to result in delays in shipment, lost sales and revenue and damage to our reputation in the market, all of which would harm our business and results of operations. In addition, while our contract obligations with our contract manufacturers in China are typically denominated in U.S. dollars, changes in currency exchange rates could impact our suppliers and increase our prices.
Any efforts to expand our product offerings beyond our current markets may not succeed, which could negatively impact our operating results.
We have focused on selling our robots in the home floor care and defense markets. We plan to expand into other markets, in particular remote presence robots for telemedicine and business collaboration. Efforts to expand our product offerings beyond the markets that we currently serve, however, may divert management resources from existing operations and require us to commit significant financial resources to an unproven business, either of which could significantly impair our operating results. Moreover, efforts to expand beyond our existing markets may never result in new products that achieve market acceptance, create additional revenue or become profitable.

13


If we fail to maintain or increase consumer robot sales through our distribution channels, our operating results would be negatively impacted.
We do not have long-term contracts regarding purchase volumes with any of our retail partners. As a result, purchases generally occur on an order-by-order basis, and the relationships, as well as particular orders, can generally be terminated or otherwise materially changed at any time by our retail partners. A decision by a major retail partner, whether motivated by competitive considerations, financial difficulties, economic conditions or otherwise, to decrease its purchases from us, to reduce the shelf space for our products or to change its manner of doing business with us could significantly damage our consumer product sales and negatively impact our business, financial condition and results of operations. In addition, during recent years, various retailers, including some of our partners, have experienced significant changes and difficulties, including consolidation of ownership, increased centralization of purchasing decisions, restructurings, bankruptcies and liquidations. These and other financial problems of some of our retailers increase the risk of extending credit to these retailers. A significant adverse change in a retail partner relationship with us or in a retail partner’s financial position could cause us to limit or discontinue business with that partner, require us to assume more credit risk relating to that partner’s receivables or limit our ability to collect amounts related to previous purchases by that partner, all of which could harm our business and financial condition. Disruption of the iRobot on-line store could also decrease our home care robot sales.

Our contracts with the U.S. federal government contain certain provisions that may be unfavorable to us and subject us to government audits, which could materially harm our business and results of operations.
Our contracts and subcontracts with the U.S. federal government subject us to certain risks and give the U.S. federal government rights and remedies not typically found in commercial contracts, including rights that allow the U.S. federal government to:
terminate contracts for convenience, in whole or in part, at any time and for any reason;
reduce or modify contracts or subcontracts if its requirements or budgetary constraints change;
cancel multi-year contracts and related orders if funds for contract performance for any subsequent year become unavailable;
exercise production priorities, which allow it to require that we accept government purchase orders or produce products under its contracts before we produce products under other contracts, which may displace or delay production of more profitable orders;
claim certain rights in products provided by us; and
control or prohibit the export of certain of our products.
Several of our prime contracts with the U.S. federal government do not contain a limitation of liability provision, creating a risk of responsibility for direct and consequential damages. Several subcontracts with prime contractors hold the prime contractor harmless against liability that stems from our work and do not contain a limitation of liability. These provisions could cause substantial liability for us, especially given the use to which our products may be put.
In addition, we are subject to audits by the U.S. federal government as part of routine audits of government contracts. As part of an audit, these agencies may review our performance on contracts, cost structures and compliance with applicable laws, regulations and standards. If any of our costs are found to be allocated improperly to a specific contract, the costs may not be reimbursed and any costs already reimbursed for such contract may have to be refunded. Accordingly, an audit could result in a material adjustment to our revenue and results of operations. Moreover, if an audit uncovers improper or illegal activities, we may be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, fines and suspension or debarment from doing business with the government.
If any of the foregoing were to occur, or if the U.S. federal government otherwise ceased doing business with us or decreased the amount of business with us, our business and operating results could be materially harmed and the value of your investment in our common stock could be impaired.
Some of our contracts with the U.S. federal government allow it to use inventions developed under the contracts and to disclose technical data to third parties, which could harm our ability to compete.
Some of our contracts allow the U.S. federal government rights to use, or have others use, patented inventions developed under those contracts on behalf of the government. Some of the contracts allow the federal government to disclose technical data without constraining the recipient in how that data is used. The ability of third parties to use patents and technical data for government purposes creates the possibility that the government could attempt to establish additional sources for the products we provide that stem from these contracts. It may also allow the government the ability to negotiate with us to reduce our prices for products we provide to it. The potential that the government may release some of the technical data without constraint creates the possibility that third parties may be able to use this data to compete with us in the commercial sector.


14


We face intense competition from other providers of robots, including diversified technology providers, as well as competition from providers offering alternative products, which could negatively impact our results of operations and cause our market share to decline.
We believe that a number of companies have developed or are developing robots that will compete directly with our product offerings. Additionally, large and small companies, government-sponsored laboratories and universities are aggressively pursuing contracts for robot-focused research and development. Many current and potential competitors have substantially greater financial, marketing, research and manufacturing resources than we possess, and there can be no assurance that our current and future competitors will not be more successful than us. Moreover, while we believe many of our customers purchase our floor vacuuming robots as a supplement to, rather than a replacement for, their traditional vacuum cleaners; we also compete in some cases with providers of traditional vacuum cleaners. Our competitors include developers of robot floor cleaning products, developers of small unmanned ground vehicles, and established government contractors working on unmanned systems.
The market for robots is highly competitive, rapidly evolving and subject to changing technologies, shifting customer needs and expectations and the likely increased introduction of new products. Our ability to remain competitive will depend to a great extent upon our ongoing performance in the areas of product development and customer support.
In the event that the robot market expands, we expect that competition will intensify as additional competitors enter the market and current competitors expand their product lines. Companies competing with us may introduce products that are competitively priced, have increased performance or functionality, or incorporate technological advances that we have not yet developed or implemented. Increased competitive pressure could result in a loss of sales or market share or cause us to lower prices for our products, any of which would harm our business and operating results.
We cannot assure you that our products will continue to compete favorably or that we will be successful in the face of increasing competition from new products and enhancements introduced by existing competitors or new companies entering the markets in which we provide products. Our failure to compete successfully could cause our revenue and market share to decline, which would negatively impact our results of operations and financial condition.
If critical components of our products that we currently purchase from a small number of suppliers become unavailable, we may incur delays in shipment, which could damage our business.
We and our outsourced manufacturers obtain hardware components, various subsystems, raw materials and batteries from a limited group of suppliers, some of which are sole suppliers. We do not have any long-term agreements with these suppliers obligating them to continue to sell components or products to us. If we or our outsourced manufacturers are unable to obtain components from third-party suppliers in the quantities and of the quality that we require, on a timely basis and at acceptable prices, we may not be able to deliver our products on a timely or cost-effective basis to our customers, which could cause customers to terminate their contracts with us, reduce our gross margin and seriously harm our business, results of operations and financial condition. Moreover, if any of our suppliers become financially unstable, we may have to find new suppliers. It may take several months to locate alternative suppliers, if required, or to re-tool our products to accommodate components from different suppliers. We may experience significant delays in manufacturing and shipping our products to customers and incur additional development, manufacturing and other costs to establish alternative sources of supply if we lose any of these sources. We cannot predict if we will be able to obtain replacement components within the time frames that we require at an affordable cost, or at all.
Our products are complex and could have unknown defects or errors, which may give rise to claims against us, diminish our brand or divert our resources from other purposes.
Our robots rely on the interplay among behavior-based artificially intelligent systems, real-world dynamic sensors, user-friendly interfaces and tightly-integrated, electromechanical designs to accomplish their missions. Despite testing, our new or existing products have contained defects and errors and may in the future contain defects, errors or performance problems when first introduced, when new versions or enhancements are released, or even after these products have been used by our customers for a period of time. These problems could result in expensive and time-consuming design modifications or warranty charges, delays in the introduction of new products or enhancements, significant increases in our service and maintenance costs, exposure to liability for damages, mandatory or voluntary recall or product upgrades, damaged customer relationships and harm to our reputation, any of which could materially harm our results of operations and ability to achieve market acceptance. Our quality control procedures relating to the raw materials and components that it receives from third-party suppliers as well as our quality control procedures relating to its products after those products are designed, manufactured and packaged may not be sufficient. In addition, increased development and warranty costs, including the costs of any mandatory or voluntary recall, could be substantial and could reduce our operating margins. Moreover, because military robots are used in dangerous situations, the failure or malfunction of any of these robots, including our own, could significantly damage our reputation and support for robot solutions in general. The existence of any defects, errors, or failures in our products could also lead to product liability claims or lawsuits against us. A successful product liability claim could result in substantial cost,

15


diminish our brand and divert management’s attention and resources, which could have a negative impact on our business, financial condition and results of operations.
If we are unable to attract and retain additional skilled personnel, we may be unable to grow our business.
To execute our growth plan, we must attract and retain additional, highly-qualified personnel. Competition for hiring these employees is intense, especially with regard to engineers with high levels of experience in designing, developing and integrating robots. Many of the companies with which we compete for hiring experienced employees have greater resources than we have. If we fail to attract new technical personnel or fail to retain and motivate our current employees, our business and future growth prospects could be severely harmed.
We may be sued by third parties for alleged infringement of their proprietary rights, which could be costly, time-consuming and limit our ability to use certain technologies in the future.
If the size of our markets increases, we would be more likely to be subject to claims that our technologies infringe upon the intellectual property or other proprietary rights of third parties. In addition, the vendors from which we license technology used in our products could become subject to similar infringement claims. Our vendors, or we, may not be able to withstand third-party infringement claims. Any claims, with or without merit, could be time-consuming and expensive, and could divert our management’s attention away from the execution of our business plan. Moreover, any settlement or adverse judgment resulting from the claim could require us to pay substantial amounts or obtain a license to continue to use the technology that is the subject of the claim, or otherwise restrict or prohibit our use of the technology. There can be no assurance that we would be able to obtain a license from the third party asserting the claim on commercially reasonable terms, if at all, that we would be able to develop alternative technology on a timely basis, if at all, or that we would be able to obtain a license to use a suitable alternative technology to permit us to continue offering, and our customers to continue using, our affected product. In addition, we may be required to indemnify our retail and distribution partners for third-party intellectual property infringement claims, which would increase the cost to us of an adverse ruling in such a claim. An adverse determination could also prevent us from offering our products to others. Infringement claims asserted against us or our vendors may have a material adverse effect on our business, results of operations or financial condition.
If we fail to protect, or incur significant costs in defending, our intellectual property and other proprietary rights, our business and results of operations could be materially harmed.
Our success depends on our ability to protect our intellectual property and other proprietary rights. We rely primarily on patents, trademarks, copyrights, trade secrets and unfair competition laws, as well as license agreements and other contractual provisions, to protect our intellectual property and other proprietary rights. Significant technology used in our products, however, is not the subject of any patent protection, and we may be unable to obtain patent protection on such technology in the future. Moreover, existing U.S. legal standards relating to the validity, enforceability and scope of protection of intellectual property rights offer only limited protection, may not provide us with any competitive advantages, and may be challenged by third parties. In addition, the laws of countries other than the United States in which we market our products may afford little or no effective protection of our intellectual property. Accordingly, despite our efforts, we may be unable to prevent third parties from infringing upon or misappropriating our intellectual property or otherwise gaining access to our technology. Unauthorized third parties may try to copy or reverse engineer our products or portions of our products or otherwise obtain and use our intellectual property. Some of our contracts with the U.S. federal government allow the federal government to disclose technical data regarding the products developed on behalf of the government under the contract without constraining the recipient on how it is used. This ability of the government creates the potential that third parties may be able to use this data to compete with us in the commercial sector. If we fail to protect our intellectual property and other proprietary rights, our business, results of operations or financial condition could be materially harmed.
In addition, defending our intellectual property rights may entail significant expense. We believe that certain products in the marketplace may infringe our existing intellectual property rights. We have, from time to time, resorted to legal proceedings to protect our intellectual property and may continue to do so in the future. We may be required to expend significant resources to monitor and protect our intellectual property rights. Any of our intellectual property rights may be challenged by others or invalidated through administrative processes or litigation. If we resort to legal proceedings to enforce our intellectual property rights or to determine the validity and scope of the intellectual property or other proprietary rights of others, the proceedings could result in significant expense to us and divert the attention and efforts of our management and technical employees, even if we were to prevail.
If we fail to enhance our brand, our ability to expand our customer base will be impaired and our operating results may suffer.
We believe that developing and maintaining awareness of the iRobot brand is critical to achieving widespread acceptance of our existing and future products and is an important element in attracting new customers. Furthermore, we expect the importance of global brand recognition to increase as competition develops. If customers do not perceive our products to be of

16


high quality, our brand and reputation could be harmed, which could adversely impact our financial results. In addition, brand promotion efforts may not yield significant revenue or increased revenue sufficient to offset the additional expenses incurred in building our brand.
We depend on the experience and expertise of our senior management team and key technical employees, and the loss of any key employee may impair our ability to operate effectively.
Our success depends upon the continued services of our senior management team and key technical employees, such as our project management personnel and senior engineers. Moreover, we often must comply with provisions in government contracts that require employment of persons with specified levels of education and work experience. Each of our executive officers, key technical personnel and other employees could terminate his or her relationship with us at any time. The loss of any member of our senior management team might significantly delay or prevent the achievement of our business objectives and could materially harm our business and customer relationships. In addition, because of the highly technical nature of our robots, the loss of any significant number of our existing engineering and project management personnel could have a material adverse effect on our business and operating results.
We are subject to extensive U.S. federal government regulation, and our failure to comply with applicable regulations could subject us to penalties that may restrict our ability to conduct our business.
As a contractor and subcontractor to the U.S. federal government, we are subject to and must comply with various government regulations that impact our operating costs, profit margins and the internal organization and operation of our business. Among the most significant regulations affecting our business are:
the Federal Acquisition Regulations and supplemental agency regulations, which comprehensively regulate the formation and administration of, and performance under government contracts;
the Truth in Negotiations Act, which requires certification and disclosure of all cost and pricing data in connection with contract negotiations;
the Cost Accounting Standards, which impose accounting requirements that govern our right to reimbursement under cost-based government contracts;
the Foreign Corrupt Practices Act, which prohibits U.S. companies from providing anything of value to a foreign official to help obtain, retain or direct business, or obtain any unfair advantage;
the False Claims Act and the False Statements Act, which, respectively, impose penalties for payments made on the basis of false facts provided to the government, and impose penalties on the basis of false statements, even if they do not result in a payment;
laws, regulations and executive orders restricting the use and dissemination of information classified for national security purposes and the exportation of certain products and technical data;
Certain contracts from the U.S. federal government may require us to maintain certain certifications including but not limited to AS9100 and CMMI;
Contractor Purchasing Systems review (CPSR) requirements, which evaluate the efficiency and effectiveness with which we spend U.S. Government funds; and
The sale of our products in countries outside the United States is regulated by the governments of those countries. While compliance with such regulation will generally be undertaken by our international distributors, we may assist with such compliance and in certain cases may be liable if a distributor fails to comply.
We must comply with U.S. laws regulating the export of our products. In addition, we are required to obtain a license from the U.S. federal government to export our PackBot, Warrior, FirstLook and SUGV lines of tactical military robots. We cannot be sure of our ability to obtain any licenses required to export our products or to receive authorization from the U.S. federal government for international sales or domestic sales to foreign persons. Moreover, the export regimes and the governing policies applicable to our business are subject to change. We cannot assure you of the extent that such export authorizations will be available to us, if at all, in the future. In some cases where we act as a subcontractor, we rely upon the compliance activities of our prime contractors, and we cannot assure you that they have taken or will take all measures necessary to comply with applicable export laws. If we or our prime contractor partners cannot obtain required government approvals under applicable regulations in a timely manner or at all, we would be delayed or prevented from selling our products in international jurisdictions, which could materially harm our business, operating results and ability to generate revenue.
Also, we need special clearances to continue working on and advancing certain of our projects with the U.S. federal government. Obtaining and maintaining security clearances for employees involves a lengthy process, and it is difficult to identify, recruit and retain employees who already hold security clearances. If our employees are unable to obtain security clearances in a timely manner, or at all, or if our employees who hold security clearances are unable to maintain the clearances or terminate employment with us, then a customer requiring classified work could terminate the contract or decide not to renew

17


it upon its expiration. In addition, we expect that many of the contracts on which we will bid will require us to demonstrate our ability to obtain facility security clearances and employ personnel with specified types of security clearances. To the extent we are not able to obtain facility security clearances or engage employees with the required security clearances for a particular contract, we may not be able to bid on or win new contracts, or effectively rebid on expiring contracts. Classified programs generally will require that we comply with various Executive Orders, federal laws and regulations and customer security requirements that may include restrictions on how we develop, store, protect and share information, and may require our employees to obtain government clearances.
Our failure to comply with applicable regulations, rules and approvals could result in the imposition of penalties, the loss of our government contracts or our suspension or debarment from contracting with the federal government generally, any of which would harm our business, financial condition and results of operations.

Acquisitions and potential future acquisitions could be difficult to integrate, divert the attention of key personnel, disrupt our business, dilute stockholder value and impair our financial results.
As part of our business strategy, we have in the past acquired, and we intend to continue to consider additional acquisitions of companies, technologies and products that we believe could accelerate our ability to compete in our core markets or allow us to enter new markets. For example, in October 2012, we acquired Evolution Robotics, Inc. Acquisitions and combinations are accompanied by a number of risks, including the difficulty of integrating the operations and personnel of the acquired companies, the potential disruption of our ongoing business, the potential distraction of management, expenses related to the acquisition and potential unknown liabilities associated with acquired businesses. Any inability to integrate completed acquisitions or combinations in an efficient and timely manner could have an adverse impact on our results of operations. In addition, we may not be able to recognize any expected synergies or benefits in connection with a future acquisition or combination. If we are not successful in completing acquisitions or combinations that we may pursue in the future, we may incur substantial expenses and devote significant management time and resources without a successful result. In addition, future acquisitions could require use of substantial portions of our available cash or result in dilutive issuances of securities.
In addition, charges to earnings as a result of acquisitions may adversely affect our operating results in the foreseeable future, which could have a material and adverse effect on the market value of our common stock.  In particular we have allocated the cost of acquiring businesses to the individual assets acquired and liabilities assumed, including various identifiable intangible assets such as acquired technology, acquired trade names and acquired customer relationships based on their respective fair values. Our estimates of fair value are based upon assumptions believed to be reasonable, but which are inherently uncertain. After we complete an acquisition, the following factors could result in material charges and adversely affect our operating results and may adversely affect our cash flows:
costs incurred to combine the operations of businesses we acquire, such as transitional employee expenses and employee retention, redeployment or relocation expenses;
impairment of goodwill or intangible assets;
amortization of intangible assets acquired;
a reduction in the useful lives of intangible assets acquired;
identification of or changes to assumed contingent liabilities, both income tax and non-income tax related after our final determination of the amounts for these contingencies or the conclusion of the measurement period (generally up to one year from the acquisition date), whichever comes first;
charges to our operating results to eliminate certain duplicative pre-merger activities, to restructure our operations or to reduce our cost structure;
charges to our operating results resulting from expenses incurred to effect the acquisition; and
charges to our operating results due to the expensing of certain stock awards assumed in an acquisition.
We may fail to realize anticipated benefits from our acquisition of Evolution Robotics.
The success of our acquisition of Evolution Robotics will depend, in part, on our ability to realize the anticipated synergies, business opportunities and growth prospects from combining our business with that of Evolution Robotics. We may never realize these anticipated synergies, business opportunities and growth prospects. Assumptions underlying estimated benefits may be inaccurate and general industry and business conditions might deteriorate. As a result, the expectations of future results of operations, including synergies and other benefits expected to result from the Evolution Robotics acquisition, might not be met.
We may not be able to obtain capital when desired on favorable terms, if at all, or without dilution to our stockholders.
We anticipate that our current cash, cash equivalents, cash provided by operating activities and funds available through

18


our working capital line of credit, will be sufficient to meet our current and anticipated needs for general corporate purposes. We operate in an emerging market, however, which makes our prospects difficult to evaluate. It is possible that we may not generate sufficient cash flow from operations or otherwise have the capital resources to meet our future capital needs. In such cases we may need additional financing to execute on our current or future business strategies. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly-issued securities may have rights, preferences or privileges senior to those of existing stockholders. We cannot assure you that additional financing will be available on terms favorable to us, or at all. If adequate funds are not available or are not available on acceptable terms, if and when needed, our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our products, or otherwise respond to competitive pressures would be significantly limited. In addition, our access to credit through our working capital line of credit may be limited by the restrictive financial covenants contained in that agreement, which require us to maintain profitability.
Environmental laws and regulations and unforeseen costs could negatively impact our future earnings.
The manufacture and sale of our products in certain states and countries may subject us to environmental and other regulations. We also face increasing complexity in our product design as we adjust to legal and regulatory requirements relating to our products. There is no assurance that such existing laws or future laws will not impair future earnings or results of operations.
Business disruptions resulting from international uncertainties could negatively impact our profitability.
We derive, and expect to continue to derive, a significant portion of our revenue from international sales in various European and Far East markets, and Canada. For the fiscal years ended December 28, 2013 and December 29, 2012, sales to non-U.S. customers accounted for 59.5% and 57.3% of total revenue, respectively. Our international revenue and operations are subject to a number of material risks, including, but not limited to:
difficulties in staffing, managing and supporting operations in multiple countries;
difficulties in enforcing agreements and collecting receivables through foreign legal systems and other relevant legal issues;
fewer legal protections for intellectual property;
foreign and U.S. taxation issues, tariffs, and international trade barriers;
difficulties in obtaining any necessary governmental authorizations for the export of our products to certain foreign jurisdictions;
potential fluctuations in foreign economies;
government currency control and restrictions on repatriation of earnings;
fluctuations in the value of foreign currencies and interest rates;
general economic and political conditions in the markets in which we operate;
domestic and international economic or political changes, hostilities and other disruptions in regions where we currently operate or may operate in the future;
changes in foreign currency exchange rates;
different and changing legal and regulatory requirements in the jurisdictions in which we currently operate or may operate in the future; and
outside of the United States, we primarily rely on a network of exclusive distributors, some of whom may be operating without written contracts.
Negative developments in any of these areas in one or more countries could result in a reduction in demand for our products, the cancellation or delay of orders already placed, threats to our intellectual property, difficulty in collecting receivables, and a higher cost of doing business, any of which could negatively impact our business, financial condition or results of operations. Moreover, our sales, including sales to customers outside the United States, are primarily denominated in U.S. dollars, and downward fluctuations in the value of foreign currencies relative to the U.S. dollar may make our products more expensive than other products, which could harm our business.
If we experience a disaster or other business continuity problem, we may not be able to recover successfully, which could cause material financial loss, loss of human capital, regulatory actions, reputational harm, or legal liability.
If we experience a local or regional disaster or other business continuity problem, such as an earthquake, terrorist attack, pandemic or other natural or man-made disaster, our continued success will depend, in part, on the availability of our personnel, our office facilities, and the proper functioning of our computer, telecommunication and other related systems and operations.

19


As we grow our operations in new geographic regions, the potential for particular types of natural or man-made disasters, political, economic or infrastructure instabilities, or other country- or region-specific business continuity risks increases.
If we suffer any data breaches involving the designs, schematics or source code for our products, our business and financial results could be adversely affected.
We attempt to securely store our designs, schematics and source code for our products as they are created. A breach, whether physical, electronic or otherwise, of the systems on which this sensitive data is stored could lead to damage or piracy of our products. In addition, we work with e-commerce providers who hold significant sensitive customer data. If we or our partners are subject to data security breaches, we may have a loss in sales or increased costs arising from the restoration or implementation of additional security measures, either of which could materially and adversely affect our business and financial results.
The effects of new regulations relating to conflict minerals may adversely affect our business.
On August 22, 2012, under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, the SEC adopted new requirements for companies that use certain minerals and metals, known as conflict minerals, in their products, whether or not these products are manufactured by third parties. These requirements will require companies to diligence, disclose and report whether or not such minerals originate from the Democratic Republic of Congo and adjoining countries. We will have to diligence whether such minerals are used in the manufacture of our products.  However, the implementation of these new requirements could adversely affect the sourcing, availability and pricing of such minerals if they are found to be used in the manufacture of our products. In addition, we will incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products. Since our supply chain is complex, we may not be able to sufficiently verify the origins for these minerals and metals used in our products through the due diligence procedures that we implement, which may harm our reputation. In such event, we may also face difficulties in satisfying customers who require that all of the components of our products are certified as conflict mineral free.  The first report is due on May 31, 2014 for the 2013 calendar year.  
Our income tax provision and other tax liabilities may be insufficient if taxing authorities are successful in asserting tax positions that are contrary to our position. Additionally, there is no guarantee that we will realize our deferred tax assets.
From time to time, we are audited by various federal, state, local and foreign authorities regarding income tax matters. Significant judgment is required to determine our provision for income taxes and our liabilities for federal, state, local and foreign taxes. Although we believe our approach to determining the appropriate tax treatment is supportable and in accordance with relevant authoritative guidance it is possible that the final tax authority will take a tax position that is materially different than that which is reflected in our income tax provision. Such differences could have a material adverse effect on our income tax provision or benefit, in the reporting period in which such determination is made and, consequently, on our results of operations, financial position and/or cash flows for such period.
The realization of our deferred tax assets ultimately depends on the existence of sufficient income in either the carryback or carryforward periods under the tax law. Due to significant estimates utilized in establishing a valuation allowance and the potential for changes in facts and circumstances, it is possible that we will be required to record additional valuation allowance in future reporting periods. Our results of operations would be impacted negatively if we determine that additional deferred tax asset valuation allowance is required in a future reporting period.
Provisions in our certificate of incorporation and by-laws, our shareholder rights agreement or Delaware law might discourage, delay or prevent a change of control of our company or changes in our management and, therefore, depress the trading price of our common stock.
Provisions of our certificate of incorporation and by-laws and Delaware law may discourage, delay or prevent a merger, acquisition or other change in control that stockholders may consider favorable, including transactions in which you might otherwise receive a premium for your shares of our common stock. These provisions may also prevent or frustrate attempts by our stockholders to replace or remove our management. These provisions include:
limitations on the removal of directors;
a classified board of directors so that not all members of our board are elected at one time;
advance notice requirements for stockholder proposals and nominations;
the inability of stockholders to act by written consent or to call special meetings;
the ability of our board of directors to make, alter or repeal our by-laws; and
the ability of our board of directors to designate the terms of and issue new series of preferred stock without stockholder approval.

20


The affirmative vote of the holders of at least 75% of our shares of capital stock entitled to vote is necessary to amend or repeal the above provisions of our certificate of incorporation. In addition, absent approval of our board of directors, our by-laws may only be amended or repealed by the affirmative vote of the holders of at least 75% of our shares of capital stock entitled to vote.
We have also adopted a shareholder rights agreement that entitles our stockholders to acquire shares of our common stock at a price equal to 50% of the then-current market value in limited circumstances when a third party acquires or announces its intention to acquire 15% or more of our outstanding common stock.
In addition, Section 203 of the Delaware General Corporation Law prohibits a publicly-held Delaware corporation from engaging in a business combination with an interested stockholder, generally a person which together with its affiliates owns, or within the last three years has owned, 15% of our voting stock, for a period of three years after the date of the transaction in which the person became an interested stockholder, unless the business combination is approved in a prescribed manner.
The existence of the foregoing provisions and anti-takeover measures could limit the price that investors might be willing to pay in the future for shares of our common stock. They could also deter potential acquirers of our company, thereby reducing the likelihood that you could receive a premium for your common stock in an acquisition.

ITEM 1B.    UNRESOLVED STAFF COMMENTS  
None.
 
ITEM 2.    PROPERTIES 
Our corporate headquarters are located in Bedford, Massachusetts, where we lease approximately 183,000 square feet. This lease expires on May 1, 2020. We lease smaller facilities in Hong Kong; Guangzhou, China; London, England; and Pasadena, California. We do not own any real property. We believe that our leased facilities and additional or alternative space available to us will be adequate to meet our needs for the foreseeable future.
 
ITEM 3.    LEGAL PROCEEDINGS 
From time to time and in the ordinary course of business, we are subject to various claims, charges and litigation. The outcome of litigation cannot be predicted with certainty and some lawsuits, claims or proceedings may be disposed of unfavorably to us, which could materially affect our financial condition or results of operations.
 
ITEM 4.    MINE SAFETY DISCLOSURES
Not Applicable.

21


PART II
 
ITEM 5.
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES 
Our common stock is listed on the NASDAQ Global Market under the symbol “IRBT”. The following table sets forth, for the periods indicated, the high and low sales prices per share for our common stock as reported on the NASDAQ Global Market.
 
High
 
Low
Fiscal 2012::
 
 
 
First quarter
$
38.33

 
$
24.40

Second quarter
$
27.40

 
$
19.46

Third quarter
$
27.16

 
$
19.09

Fourth quarter
$
24.26

 
$
16.25

Fiscal 2013::
 
 
 
First quarter
$
25.76

 
$
18.25

Second quarter
$
40.12

 
$
23.76

Third quarter
$
41.12

 
$
30.85

Fourth quarter
$
38.46

 
$
28.90

As of February 10, 2014, there were approximately 29,020,961 shares of our common stock outstanding held by approximately 112 stockholders of record and the last reported sale price of our common stock on the NASDAQ Global Market on February 10, 2014 was $37.70 per share.
Dividend Policy
We have never declared or paid any cash dividends on our capital stock. We currently expect to retain future earnings, if any, to finance the growth and development of our business and we do not anticipate paying any cash dividends in the foreseeable future.


22


ITEM 6.    SELECTED FINANCIAL DATA
The selected historical financial data set forth below as of December 28, 2013 and December 29, 2012 and for the years ended December 28, 2013, December 29, 2012 and December 31, 2011 are derived from financial statements, which have been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm. Consolidated balance sheets as of December 28, 2013 and December 29, 2012 and the related consolidated statements of income and of cash flows for each of the three years in the period ended December 28, 2013 and notes thereto appear elsewhere in this Annual Report on Form 10-K. The selected historical financial data as of December 31, 2011, January 1, 2011 and January 2, 2010 and for the years ended January 1, 2011 and January 2, 2010 are derived from our financial statements, which have been audited by PricewaterhouseCoopers LLP and which are not included elsewhere in this Annual Report.
In fiscal year 2012, we initiated a reorganization that resulted in, among other things, the centralization of all of our engineering and operations activities. This reorganization was completed at the beginning of fiscal year 2013. In conjunction with this reorganization, we reviewed the financial statement classification of our costs and expenses. As a result of this review, we decided to classify certain expenses differently than had been classified and presented in prior periods to provide a more clear understanding of our financial performance. Because the classification of certain expenses on the income statement changed in fiscal year 2013 as compared to prior periods, we recast the financial results of prior periods in a manner consistent with the fiscal year 2013 presentation for comparability purposes. The reclassified amounts reflected in the consolidated statements of income for the years ended December 29, 2012 and December 31, 2011 included herein conform to the fiscal year 2013 presentation. Similarly, the following selected consolidated financial data reflects the reclassified amounts for the years ended December 29, 2012, December 31, 2011, January 1, 2011 and January 2, 2010.
The following selected consolidated financial data should be read in conjunction with our consolidated financial statements, the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this Annual Report on Form 10-K. The historical results are not necessarily indicative of the results to be expected for any future period.
 
Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
January 1,
2011
 
January 2,
2010
 
(In thousands, except earnings per share amounts)
Consolidated Statements of Income:
 
 
 
 
 
 
 
 
 
Revenue
 
 
 
 
 
 
 
 
 
Product revenue
$
477,444

 
$
418,550

 
$
426,525

 
$
360,394

 
$
262,199

Contract revenue
9,957

 
17,694

 
38,975

 
40,558

 
36,418

Total revenue
487,401

 
436,244

 
465,500

 
400,952

 
298,617

Cost of revenue
 
 
 
 
 
 
 
 
 
Cost of product revenue
262,224

 
234,102

 
240,930

 
218,237

 
175,514

Cost of contract revenue
4,023

 
7,794

 
16,917

 
18,664

 
18,561

Total cost of revenue
266,247

 
241,896

 
257,847

 
236,901

 
194,075

Gross Margin
221,154

 
194,348

 
207,653

 
164,051

 
104,542

Operating Expenses
 
 
 
 
 
 
 
 
 
Research and development
63,649

 
57,066

 
60,100

 
51,185

 
35,969

Selling and marketing
71,529

 
66,412

 
50,477

 
42,778

 
33,026

General and administrative
53,358

 
45,698

 
43,753

 
36,618

 
30,110

Total operating expenses
188,536

 
169,176

 
154,330

 
130,581

 
99,105

Operating Income
32,618

 
25,172

 
53,323

 
33,470

 
5,437

Net Income
$
27,641

 
$
17,297

 
$
40,191

 
$
25,514

 
$
3,330

Net Income Per Common Share Basic
$
0.97

 
$
0.63

 
$
1.50

 
$
1.00

 
$
0.13

Diluted
$
0.94

 
$
0.61

 
$
1.44

 
$
0.96

 
$
0.13

Shares Used in Per Common Share Calculations
 
 
 
 
 
 
 
 
 
Basic
28,495

 
27,577

 
26,712

 
25,394

 
24,998

Diluted
29,354

 
28,301

 
27,924

 
26,468

 
25,640



23


 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
January 1,
2011
 
January 2,
2010
 
(In thousands)
Consolidated Balance Sheet Data:
 
 
 
 
 
 
 
 
 
Cash and cash equivalents
$
165,404

 
$
126,770

 
$
166,308

 
$
108,383

 
$
71,856

Short term investments
21,954

 
12,430

 
17,811

 
13,928

 
4,959

Total assets
416,337

 
354,313

 
332,213

 
254,331

 
199,584

Total liabilities
85,648

 
78,496

 
89,255

 
79,424

 
66,390

Total stockholders’ equity
330,689

 
275,817

 
242,958

 
174,907

 
133,194


ITEM  7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The information contained in this section has been derived from our consolidated financial statements and should be read together with our consolidated financial statements and related notes included elsewhere in this Annual Report on Form 10-K. This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities and Exchange Act of 1934, as amended, or the Exchange Act, and are subject to the “safe harbor” created by those sections. In particular, statements contained in this Annual Report on Form 10-K that are not historical facts, including, but not limited to statements concerning new product sales, product development and offerings, Roomba, Scooba, Looj, Braava and Mirra products, PackBot tactical military robots, the Small Unmanned Ground Vehicle, Ava, our home robots, defense and security robots and remote presence robots business units, our competition, our strategy, our market position, market acceptance of our products, seasonal factors, revenue recognition, our profits, growth of our revenues, product life cycle revenue, composition of our revenues, our cost of revenues, units shipped, average selling prices, funding of our defense and security robot development programs, operating expenses, selling and marketing expenses, general and administrative expenses, research and development expenses, and compensation costs, our projected income tax rate, our credit and letter of credit facilities, our valuations of investments, valuation and composition of our stock-based awards, and liquidity, constitute forward-looking statements and are made under these safe harbor provisions. Some of the forward-looking statements can be identified by the use of forward-looking terms such as “believes,” “expects,” “may,” “will,” “should,” “could,” “seek,” “intends,” “plans,” “estimates,” “anticipates,” or other comparable terms. Forward-looking statements involve inherent risks and uncertainties, which could cause actual results to differ materially from those in the forward-looking statements. We urge you to consider the risks and uncertainties discussed in greater detail under the heading “Risk Factors” in evaluating our forward-looking statements. We have no plans to update our forward-looking statements to reflect events or circumstances after the date of this report. We caution readers not to place undue reliance upon any such forward-looking statements, which speak only as of the date made.
Overview
iRobot designs and builds robots that make a difference. For over 20 years, we have developed proprietary technology incorporating advanced concepts in navigation, mobility, manipulation and artificial intelligence to build industry-leading robots. Our home care robots perform time-consuming domestic chores while our defense and security robots perform tasks such as battlefield reconnaissance and bomb disposal, and multi-purpose tasks for local police and first responders, as well as certain commercial users. Our remote presence robots expand the reach of medical care by connecting physicians with patients from anywhere in the world and also provide autonomous telepresence capabilities enabling remote workers to more personally collaborate throughout the workplace. We sell our robots through a variety of distribution channels, including chain stores and other national retailers, through our on-line store, through value added distributors and resellers, and to the U.S. military and other government agencies worldwide.
As of December 28, 2013, we had 528 full-time employees. We have developed expertise in the disciplines necessary to build durable, high-performance and cost-effective robots through the close integration of software, electronics and hardware. Our core technologies serve as reusable building blocks that we adapt and expand to develop next generation and new products, reducing the time, cost and risk of product development. Our significant expertise in robot design and engineering, combined with our management team’s experience in consumer, military and enterprise markets, positions us to capitalize on the expected growth in the market for robots.
Although we have successfully launched consumer and defense and security products, our continued success depends upon our ability to respond to a number of future challenges. We believe the most significant of these challenges include increasing competition in the markets for both our consumer and defense and security products, and our ability to successfully develop and introduce products and product enhancements into both new and existing markets.

24


Our total revenue for 2013 was $487.4 million, which represents a 12% increase from 2012 revenue of $436.2 million. This increase in revenue was largely attributable to a $71.0 million increase in revenue in our home robots business as a direct result of growth in both domestic and international markets. The increase in home robots revenue was partially offset by a decrease in revenue of $20.9 million in our defense and security business related to continued troop withdrawals in Afghanistan, program cancellations and ongoing budget reductions within the U.S. government. We began selling our remote presence robots into the healthcare market in 2013, however, these sales did not generate meaningful revenue in 2013. Our home robots revenue represented 88% of our total 2013 revenue compared to 82% in 2012. We anticipate that our revenue for the next few years will be primarily driven by our rapidly growing home technology business and that our home robots revenue will comprise approximately 90% of our total revenue in the near term.
Our total revenue for 2012 was $436.2 million, which represents a 6% decrease from 2011 revenue of $465.5 million. Revenue for 2012 in our home robots business increased $78.2 million compared to 2011 and represented 82% of our total 2012 revenue compared to 60% in 2011. The increase in home robots revenue was the result of growth in both domestic and international markets. Revenue for 2012 in our defense and security business decreased by $107.5 million compared to 2011 as a direct result of troop withdrawals in Afghanistan, program cancellations and ongoing budget reductions within the U.S. government. We anticipate that our business performance over the next few years will be primarily driven by our rapidly growing home technology business and expect that our home robots revenue will comprise approximately 90% of our total revenue in the near term.
Revenue
We currently derive revenue from product sales, government research and development contracts, and commercial research and development contracts. Product revenue is derived from the sale of our various home cleaning robots, defense and security robots and remote presence robots and related accessories. Research and development revenue is derived from the execution of contracts awarded by the U.S. federal government, other governments and a small number of other partners. In the future, we expect to derive increasing revenue from product maintenance and support services due to a focused effort to market these services to the expanding installed base of our robots.
We currently derive a majority of our product revenue from the sale of our home cleaning robots, and to a lesser extent, our PackBot, FirstLook, SUGV and Warrior tactical military robots. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, product revenues accounted for 98.0%, 95.9% and 91.6% of total revenue, respectively. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, our funded research and development contracts accounted for approximately 2.0%, 4.1% and 8.4% of our total revenue, respectively.
For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, approximately 75.3%, 75.4% and 74.0% respectively, of our home robot product revenue resulted from sales to 15 customers. For fiscal 2013, fiscal 2012 and fiscal 2011, the customers were comprised of both domestic retailers and international distributors. Direct-to-consumer revenue generated through our domestic and international on-line stores accounted for 5.9%, 6.3% and 9.6% of our home robot product revenue for the fiscal years ended December 28, 2013 , December 29, 2012 and December 31, 2011, respectively. We typically sell our recently launched products direct on-line, and then subsequently offer these products through other channels of distribution.
For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, sales to non-U.S. customers accounted for 59.5%, 57.3% and 45.5% of total revenue, respectively.
Our revenue from product sales is generated through sales to our retail distribution channels, our distributor network and to certain U.S. and foreign governments. We recognize revenue from sales of robots under the terms of the customer agreement upon transfer of title and risk of loss to the customer, net of estimated returns, provided that collection is determined to be reasonably assured and no significant obligations remain. During 2013 and 2012, we recorded favorable adjustments to our home robots business revenue resulting from reductions to our defective returns provision of $7.9 million and $11.0 million, respectively. These favorable adjustments in 2013 were directly attributable to lower defective returns experience, and the favorable adjustments in 2012 were directly attributable to contractual modifications limiting our defective returns liability with certain customers, as well as overall lower defective returns experience.
Revenue from our defense and security robots business are occasionally influenced by the September 30 fiscal year-end of the U.S. federal government. In addition, our revenue can be affected by the timing of the release of new products and the size and timing of contract awards from defense and other government agencies. Historically, revenue from consumer product sales has been significantly seasonal, with a majority of our consumer product revenue generated in the second half of the year (in advance of the holiday season). As a result of the growth of our international consumer business, which is less seasonal than our domestic consumer business, our consumer product revenue is currently spread more evenly throughout the year.

25


Cost of Revenue
Cost of product revenue includes the cost of raw materials and labor that go into the development and manufacture of our products as well as manufacturing overhead costs such as manufacturing engineering, quality assurance, logistics and warranty costs. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, cost of product revenue was 54.9%, 55.9% and 56.5% of total product revenue, respectively. Raw material costs, which are our most significant cost items, can fluctuate materially on a periodic basis, although many components have been historically stable. Additionally, unit costs can vary significantly depending on the mix of products sold. There can be no assurance that our costs of raw materials will not increase. Labor costs also comprise a significant portion of our cost of revenue. We outsource the manufacture of our home robots to contract manufacturers in China. While labor costs in China traditionally have been favorable compared to labor costs elsewhere in the world, including the United States, we believe that labor in China is becoming more scarce. In addition, fluctuations in currency exchange rates could increase the cost of labor. Consequently, the labor costs for our home robots could increase in the future.
Cost of contract revenue includes the direct labor costs of engineering resources committed to funded research and development contracts, as well as third-party consulting, travel and associated direct material costs. Additionally, we include overhead expenses such as indirect engineering labor, occupancy costs associated with the project resources, engineering tools and supplies and program management expenses. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, cost of contract revenue was 40.4%, 44.0% and 43.4% of total contract revenue, respectively.
Gross Margin
Our gross margin as a percentage of revenue varies according to the mix of product and contract revenue, the mix of products sold, total sales volume, the level of defective product returns, and levels of other product costs such as warranty, scrap, re-work and manufacturing overhead. For the years ended December 28, 2013, December 29, 2012 and December 31, 2011, gross margin was 45.4%, 44.6% and 44.6% of total revenue, respectively.
Research and Development Expenses
Research and development expenses consist primarily of:
salaries and related costs for our engineers;
costs for high technology components used in product and prototype development;
costs of test equipment used during product development; and
occupancy and other overhead costs.
We have significantly expanded our research and development capabilities and expect to continue to expand these capabilities in the future. We are committed to consistently maintaining the level of innovative design and development of new products as we strive to enhance our ability to serve our existing consumer and military markets as well as new markets for robots, such as telepresence. We anticipate that research and development expenses will increase in absolute dollars but remain relatively consistent, or decrease slightly, as a percentage of revenue in the foreseeable future.
For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, research and development expense was $63.6 million, $57.1 million and $60.1 million, or 13.1%, 13.1% and 12.9% of total revenue, respectively.
Selling, General and Administrative Expenses
Our selling, general and administrative expenses consist primarily of:
salaries and related costs for sales and marketing personnel;
salaries and related costs for executives and administrative personnel;
advertising, marketing and other brand-building costs;
customer service costs;
professional services costs;
information systems and infrastructure costs;
travel and related costs; and
occupancy and other overhead costs.
We anticipate that selling, general and administrative expenses will increase in absolute dollars but remain relatively consistent, or decrease slightly, as a percentage of revenue in the foreseeable future as we continue to build the iRobot brand.
For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011 selling, general and administrative expense was $124.9 million, $112.1 million and $94.2 million, or 25.6%, 25.7% and 20.2% of total revenue, respectively.

26


Fiscal Periods
We operate and report using a 52-53 week fiscal year ending on the Saturday closest to December 31. Accordingly, our fiscal quarters will end on the Saturday that falls closest to the last day of the third month of each quarter.
Critical Accounting Policies and Estimates
Our consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses, and related disclosures. We evaluate our estimates and assumptions on an ongoing basis. Our actual results may differ from these estimates.
We believe that of our significant accounting policies, which are described in the notes to our consolidated financial statements, the following accounting policies involve a greater degree of judgment and complexity. Accordingly, we believe that the following accounting policies are the most critical to aid in fully understanding and evaluating our consolidated financial condition and results of operations.
Revenue Recognition
We derive our revenue from product sales and, to a lesser extent, government research and development contracts, and commercial research and development contracts. We sell products directly to customers and indirectly through resellers and distributors. We recognize revenue from sales of robots under the terms of the customer agreement upon transfer of title and risk of loss to the customer, net of estimated returns, provided that collection is determined to be reasonably assured and no significant obligations remain. Sales to domestic resellers of home robots are typically subject to agreements allowing for limited rights of return, rebates and price protection. Accordingly, we reduce revenue for our estimates of liabilities for these rights of return at the time the related sale is recorded. We make an estimate of sales returns for products sold by domestic resellers directly based on historical returns experience and other relevant data. Our international distributor agreements do not currently allow for product returns and, as a result, no reserve for returns is established for this group of customers. We have aggregated and analyzed historical returns from domestic resellers and end users that form the basis of our estimate of future sales returns by resellers or end users. When a right of return exists, the provision for these estimated returns is recorded as a reduction of revenue at the time that the related revenue is recorded. If actual returns differ significantly from our estimates, such differences could have a material impact on our results of operations for the period in which the returns become known. The estimates for returns are adjusted periodically based upon historical rates of returns. The estimates and reserve for rebates and price protection are based on specific programs, expected usage and historical experience. Actual results could differ from these estimates.
Under cost-plus-fixed-fee (CPFF) type contracts, we recognize revenue based on costs incurred plus a pro rata portion of the total fixed fee. Costs incurred include labor and material that are directly associated with individual CPFF contracts plus indirect overhead and general and administrative type costs based upon billing rates submitted by the Company to the Defense Contract Management Agency (DCMA). We submit on an annual basis final indirect billing rates to DCMA based upon actual costs incurred throughout the year. In the situation where our final actual billing rates are greater than the estimated rates currently in effect, we record a cumulative revenue adjustment in the period in which the rate differential is collected from the customer. These final billing rates are subject to audit by the Defense Contract Audit Agency (DCAA), which can occur several years after the final billing rates are submitted and may result in material adjustments to revenue recognized based on estimated final billing rates. As of December 28, 2013, fiscal year 2007 is under audit by DCAA, and fiscal years 2008 through 2013 are open for audit by DCAA. In the situation where our anticipated actual billing rates will be lower than the provisional rates currently in effect, we record a cumulative revenue adjustment in the period in which the rate differential is identified. Revenue on firm fixed price (FFP) contracts is recognized using the percentage-of-completion method. For government product FFP contracts, revenue is recognized as the product is shipped or in accordance with the contract terms. Costs and estimated gross margins on contracts are recorded as revenue as work is performed based on the percentage that incurred costs compare to estimated total costs utilizing the most recent estimates of costs and funding. Changes in job performance, job conditions, and estimated profitability, including those arising from final contract settlements and government audits, may result in revisions to costs and income and are recognized in the period in which the revisions are determined. Since many contracts extend over a long period of time, revisions in cost and funding estimates during the progress of work have the effect of adjusting earnings applicable to past performance in the current period. When the current contract estimate indicates a loss, a provision is made for the total anticipated loss in the current period. Revenue earned in excess of billings, if any, is recorded as unbilled revenue. Billings in excess of revenue earned, if any, are recorded as deferred revenue.
Accounting for Stock-Based Awards
We recognized $4.8 million of stock-based compensation expense during the fiscal year ended December 28, 2013 for stock options. The unamortized fair value as of December 28, 2013 associated with these grants was $7.2 million with a weighted-average remaining recognition period of 2.44 years.

27


The risk-free interest rate is derived from the average U.S. Treasury constant maturity rate, which approximates the rate in effect at the time of grant, commensurate with the expected life of the instrument. The dividend yield is zero based upon the fact that we have never paid and have no present intention to pay cash dividends. We utilize company-specific historical data for purposes of establishing expected volatility and expected term.
Based upon the above assumptions, the weighted average fair value of each stock option granted for the fiscal year ended December 28, 2013 was $11.17.
During the fiscal year ended December 28, 2013, the Company recognized $8.6 million of stock-based compensation associated with restricted stock units. Unamortized expense associated with restricted stock units at December 28, 2013, was $17.5 million.
We have assumed a forfeiture rate for all stock options, restricted stock awards and restricted stock-based units. In the future, we will record incremental stock-based compensation expense if the actual forfeiture rates are lower than estimated and will record a recovery of prior stock-based compensation expense if the actual forfeitures are higher than estimated.
Accounting for stock-based awards requires significant judgment and the use of estimates, particularly surrounding assumptions such as stock price volatility and expected option lives to value equity-based compensation.
Accounting for Income Taxes
Deferred taxes are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates in effect in the years in which the differences are expected to reverse. Valuation allowances are provided if, based upon the weight of available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.
We monitor the realization of our deferred tax assets based on changes in circumstances, for example, recurring periods of income for tax purposes following historical periods of cumulative losses, generation of tax credits compared to future utilization of credits, or changes in tax laws or regulations. Our income tax provision and our assessment of the ability to realize our deferred tax assets involve significant judgments and estimates. We are currently generating state research credits that exceed the amount being utilized. As a result of this trend, a valuation allowance may be needed in the future related to these state tax credits.
In fiscal 2012, as part of the accounting for our acquisition of Evolution Robotics, Inc., we recorded a valuation allowance of $2.7 million related to certain state tax attributes of Evolution Robotics, Inc. In fiscal 2013, the deferred tax asset and related valuation allowance were reduced by $0.6 million based on the final computation of certain pre-acquisition state tax attributes of Evolution Robotics, Inc. At December 28, 2013, we maintain a net valuation allowance of $2.1 million.
If there is a future change in the legal entity status of Evolution Robotics, Inc. and these deferred tax assets are more likely than not to be realized, a release of all, or part, of the related valuation allowance could result in an income tax benefit in the period of release. Such release of the valuation allowance could occur within the next twelve months upon the aforementioned change in legal entity status.
Warranty
We typically provide a one-year warranty (with the exception of European consumer products which typically have a two-year warranty period and our defense and security spares which typically have a warranty period of less than one year) against defects in materials and workmanship and will either repair the goods, provide replacement products at no charge to the customer or refund amounts to the customer for defective products. We record estimated warranty costs, based on historical experience by product, at the time we recognize product revenue. Actual results could differ from these estimates, which could cause increases or decreases to our warranty reserves in future periods.
Inventory Valuation
We value our inventory at the lower of the actual cost of our inventory or its current estimated market value. We write down inventory for obsolescence or unmarketable inventories based upon assumptions about future demand and market conditions. Actual demand and market conditions may be lower than those that we project and this difference could have a material adverse effect on our gross margin if inventory write-downs beyond those initially recorded become necessary. Alternatively, if actual demand and market conditions are more favorable than those we estimated at the time of such a write-down, our gross margin could be favorably impacted in future periods.
Long-Lived Assets, including Purchased Intangible Assets
We periodically evaluate the recoverability of long-lived assets, including other purchased intangible assets whenever events and changes in circumstances, such as reductions in demand or significant economic slowdowns in the industry, indicate that the carrying amount of an asset may not be fully recoverable. When indicators of impairment are present, the carrying values of the asset group are evaluated in relation to the future undiscounted cash flows of the underlying business. The net

28


book value of the underlying asset is adjusted to fair value if the sum of the expected discounted cash flows is less than book value. Fair values are based on estimates of market prices and assumptions concerning the amount and timing of estimated future cash flows and assumed discount rates, reflecting varying degrees of perceived risk.


Overview of Results of Operations
The following table sets forth our results of operations for the periods shown:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Revenue
 
 
 
 
 
Product revenue
$
477,444

 
$
418,550

 
$
426,525

Contract revenue
9,957

 
17,694

 
38,975

Total revenue
487,401

 
436,244

 
465,500

Cost of Revenue
 
 
 
 
 
Cost of product revenue(1)
262,224

 
234,102

 
240,930

Cost of contract revenue
4,023

 
7,794

 
16,917

Total cost of revenue
266,247

 
241,896

 
257,847

Gross margin
221,154

 
194,348

 
207,653

Operating Expenses
 
 
 
 
 
Research and development(1)
63,649

 
57,066

 
60,100

Selling and marketing(1)
71,529

 
66,412

 
50,477

General and administrative(1)
53,358

 
45,698

 
43,753

Total operating expenses
188,536

 
169,176

 
154,330

Operating Income
32,618

 
25,172

 
53,323

Other Income (Expense), Net
(203
)
 
435

 
218

Income Before Income Taxes
32,415

 
25,607

 
53,541

Income Tax Expense
4,774

 
8,310

 
13,350

Net Income
$
27,641

 
$
17,297

 
$
40,191

 ___________________
(1)
Stock-based compensation recorded in fiscal 2013, 2012 and 2011 breaks down by expense classification as follows.
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Cost of product revenue
$
700

 
$
889

 
$
1,069

Research and development
2,700

 
1,904

 
1,349

Selling and marketing
1,246

 
808

 
724

General and administrative
8,763

 
7,382

 
5,642



29


The following table sets forth our results of operations as a percentage of revenue for the periods shown:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
Revenue
 
 
 
 
 
Product revenue
98.0
 %
 
95.9
%
 
91.6
%
Contract revenue
2.0

 
4.1

 
8.4

Total revenue
100.0

 
100.0

 
100.0

Cost of Revenue
 
 
 
 
 
Cost of product revenue
53.8

 
53.7

 
51.8

Cost of contract revenue
0.8

 
1.7

 
3.6

Total cost of revenue
54.6

 
55.4

 
55.4

Gross margin
45.4

 
44.6

 
44.6

Operating Expenses
 
 
 
 
 
Research and development
13.1

 
13.1

 
12.9

Selling and marketing
14.7

 
15.2

 
10.8

General and administrative
10.9

 
10.5

 
9.4

Total operating expenses
38.7

 
38.8

 
33.1

Operating Income
6.7

 
5.8

 
11.5

Other Income (Expense), Net

 
0.1

 

Income Before Income Taxes
6.7

 
5.9

 
11.5

Income Tax Expense
1.0

 
1.9

 
2.9

Net Income
5.7
 %
 
4.0
%
 
8.6
%
Comparison of Years Ended December 28, 2013 and December 29, 2012
Revenue
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
Total Revenue
$
487,401

 
$
436,244

 
$
51,157

 
11.7
%
Our revenue increased 11.7% to $487.4 million in fiscal 2013 from $436.2 million in fiscal 2012. Revenue increased $71.0 million, or 19.9%, in our home robots business unit, and decreased $20.9 million, or 29.5%, in our defense and security business unit.
The $71.0 million increase in revenue from our home robots business unit was driven by a 19.2% increase in units shipped and a 4.1% increase in net average selling price. In fiscal 2013, international home robots revenue increased $34.6 million and domestic home robots revenue increased $36.4 million. Total home robots shipped in fiscal 2013 were 1,933,000 units compared to 1,621,000 units in fiscal 2012. The increase in home robots business unit revenue and units shipped was primarily attributable to a 30.9% increase in domestic sales of our home robots products and a 14.5% increase in international sales of our home robots products. The increase in domestic sales of our home robots products was primarily attributable to increased sales to domestic retail stores driven by the success of our recent domestic advertising campaign, and expanded distribution of our Roomba 700 and 600 series robots. The increase in international sales is due primarily to increased demand in our Asian markets, partially offset by a decrease in sales in our European markets. The increased demand in our Asian markets was driven by demand for our Roomba 700 and 600 series robots, and the introduction of our Braava robot. In addition, net average selling prices in the home robots business unit increased due to increased volume of higher priced products including the Roomba 700 and 600 series robots, and fewer sales of our lower priced Roomba series.
The $20.9 million decrease in revenue from our defense and security robots business unit was driven by a $1.3 million decrease in defense and security robot revenue, a $9.4 million decrease in recurring contract development revenue generated under research and development contracts, and a $10.2 million decrease in product life cycle revenue (spare parts, accessories). The net average selling price of our defense and security robots decreased by 52.6% due to product mix primarily attributable to an increase in FirstLook units shipped in 2013, which have a lower selling price than the SUGV units that comprised a larger

30


portion of the units shipped in 2012. Total defense and security robots shipped in 2013 were 534 units compared to 274 units in 2012. The $1.3 million decrease in defense and security robot revenue resulted from decreased shipments of higher priced SUGV robots in 2013 compared to 2012. The $9.4 million decrease in recurring contract development revenue generated under research and development contracts was primarily the result of decreases in government funding for our SUGV programs. The $10.2 million decrease in product life cycle revenue was due to reduction in spares associated with lower robot sales and a decrease in PackBot upgrades. Continued funding delays for government contracts have reduced our near-term visibility in our defense and security robots business unit and contributed to the decrease in period-over-period revenue in this business unit. We cannot predict with any certainty the extent to which these funding delays will continue.
Cost of Revenue
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
Total cost of revenue
$
266,247

 
$
241,896

 
$
24,351

 
10.1
%
As a percentage of total revenue
54.6
%
 
55.4
%
 
 
 
 
Total cost of revenue increased to $266.2 million in fiscal 2013, compared to $241.9 million in fiscal 2012. The increase is primarily due to the 19.2% increase in home robot units shipped and the 94.9% increase in defense and security units shipped in fiscal 2013 as compared to fiscal 2012. Additionally, favorable adjustments of $5.2 million relating to reductions in our international warranty accrual for our home robots business, attributable to declining warranty cost experience were recorded in 2012 with no such adjustments recorded in 2013.
Gross Margin
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
Total gross margin
$
221,154

 
$
194,348

 
$
26,806

 
13.8
%
As a percentage of total revenue
45.4
%
 
44.6
%
 
 
 
 
Gross margin increased $26.8 million, or 13.8%, to $221.2 million (45.4% of revenue) in fiscal 2013 from $194.3 million (44.6% of revenue) in fiscal 2012. The increase in gross margin as a percentage of revenue was the result of the defense and security business unit gross margin increasing 7.1 percentage points offset by the home robots business unit gross margin decreasing 1.7 percentage points. The 7.1 percentage point increase in the defense and security robots business unit is attributable to improved leverage of our overhead expense in 2013 as compared to 2012, as well as higher excess and obsolete inventory costs in 2012, with no material excess and obsolete inventory costs in 2013. During 2013 and 2012, we recorded favorable adjustments to our return provision due to gradual improvements in returns resulting from sustained investment in product quality of $7.9 million and $11.0 million, respectively. Additionally, we recorded favorable adjustments of $5.2 million relating to reductions in our international warranty accrual for our home robots business, attributable to declining warranty cost experience in 2012 with no such adjustments recorded in 2013. The 1.7 percentage point decrease in the home robots business unit gross margin resulted from the $8.3 million decrease in these favorable adjustments to our return provision and warranty accrual, partially offset by increased volume of higher margin products including the Roomba 700 and 600 series robots, and fewer sales of our lower margin Roomba series.

Research and Development
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
Total research and development
$
63,649

 
$
57,066

 
$
6,583

 
11.5
%
As a percentage of total revenue
13.1
%
 
13.1
%
 
 
 
 
Research and development expenses increased $6.6 million, or 11.5%, to $63.6 million (13.1% of revenue) in fiscal 2013 from $57.1 million (13.1% of revenue) in fiscal 2012. This increase is attributable to increased efforts in product development and continued product enhancements in 2013 compared to 2012, as well as research and development costs associated with Evolution, which was acquired on October 1, 2012.

31


Selling and Marketing
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
Total selling and marketing
$
71,529

 
$
66,412

 
$
5,117

 
7.7
%
As a percentage of total revenue
14.7
%
 
15.2
%
 
 
 
 
Selling and marketing expenses increased by $5.1 million, or 7.7%, to $71.5 million (14.7% of revenue) in fiscal 2013 from $66.4 million (15.2% of revenue) in fiscal 2012. This increase is primarily attributable to marketing expenses incurred during 2013 as part of our continued global marketing and branding efforts.
General and Administrative
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
General and administrative
$
53,358

 
$
45,698

 
$
7,660

 
16.8
%
As a percentage of total revenue
10.9
%
 
10.5
%
 
 
 
 

General and administrative expenses increased by $7.7 million, or 16.8%, to $53.4 million (10.9% of revenue) in fiscal 2013 from $45.7 million (10.5% of revenue) in fiscal 2012. This increase is primarily attributable to a $5.8 million increase in compensation costs, and a $1.8 million write-down of an intangible asset in 2013, resulting from a decision made in 2013 to refocus our funded research activities that significantly reduced our utilization of the technology associated with the intangible asset.
Other Income (Expense), Net
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
Other Income (expense), net
$
(203
)
 
$
435

 
$
(638
)
 
(146.7
)%
As a percentage of total revenue
 %
 
0.1
%
 
 
 
 
Other income (expense), net, amounted to $(0.2) million and $0.4 million for fiscal 2013 and fiscal 2012, respectively, and consisted primarily of interest income offset by foreign currency exchange losses resulting from foreign currency exchange rate fluctuations.
Income Tax Provision
 
Fiscal Year Ended
 
 
 
 
 
December 28,
2013
 
December 29,
2012
 
Dollar Change
 
Percent Change
 
(In thousands)
Income tax provision
$
4,774

 
$
8,310

 
$
(3,536
)
 
(42.6
)%
As a percentage of pre-tax income
14.7
%
 
32.5
%
 
 
 
 
We recorded an income tax provision of $4.8 million and $8.3 million for fiscal 2013 and fiscal 2012, respectively. The $4.8 million income tax provision for fiscal 2013 was based upon a 2013 effective income tax rate of 28.5% plus a net income tax benefit of $4.5 million primarily resulting from the extension of the federal research and development tax credit in 2013 and the settlement of uncertain tax positions upon completion of an Internal Revenue Service (IRS) audit. The $8.3 million provision for fiscal 2012 was based upon a 2012 effective income tax rate of 30.3% plus a net income tax expense of $0.6 million primarily resulting from the true-up of prior year permanent items.
In January 2013, legislation was enacted that included the extension of the federal research and development tax credits. The legislation retroactively reinstated the research and development tax credit for 2012 and extended it through December 31, 2013. As a result, we recorded a discrete benefit of approximately $1.7 million related to 2012 in 2013.

32


The federal research and development tax credit expired at the end of 2013. The federal research and development tax credit has not yet been enacted for 2014 and, unless retroactively reinstated, will cause our 2014 effective tax rate to increase.
The decrease in the effective tax rate from 30.3% in 2012 to 28.5% in 2013 was primarily due to the extension of the federal research and development tax credit, offset by an increase in state taxes.
Comparison of Years Ended December 29, 2012 and December 31, 2011
Revenue
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
Total Revenue
$
436,244

 
$
465,500

 
$
(29,256
)
 
(6.3
)%
Our revenue decreased 6.3% to $436.2 million in fiscal 2012 from $465.5 million in fiscal 2011. Revenue increased approximately $78.2 million, or 28.1%, in our home robots business unit, and decreased $104.2 million, or 59.5%, in our defense and security business unit.
The $78.2 million increase in revenue from our home robots business unit was driven by an 18.2% increase in units shipped and a 7.2% increase in net average selling price. In fiscal 2012, international home robots revenue increased $43.3 million and domestic home robots revenue increased $34.9 million, including $3.8 million in the three month period ended December 29, 2012 related to the newly acquired Braava (formerly Mint) floor sweeping robot. Total home robots shipped in fiscal 2012 were 1,621,000 units compared to 1,371,000 units in fiscal 2011. The increase in home robots business unit revenue and units shipped was primarily attributable to a 22.1% increase in international sales of our home robots products and a 42.2% increase in domestic sales of our home robots products. The increase in international sales is due primarily to increased demand in our Asian and European markets, which was driven by our new Roomba 700 series and 600 series robots, and an increase in marketing programs by us and our international distributors. The increase in domestic sales of our home robots products was primarily attributable to increased sales to domestic retail stores driven by the success of our recent domestic advertising campaign, expanded distribution of our Roomba 700 series robot and the introduction of the Roomba 600 series robot, and favorable adjustments to our return provision due to gradual improvement in returns resulting from sustained investment in product quality. In addition, net average selling prices in the home robots business unit increased due to increased volume of higher priced products including the Roomba 700 series robot, and fewer sales of our lower priced Roomba series.
The $104.2 million decrease in revenue from our defense and security robots business unit was driven by an $81.6 million decrease in defense and security robot revenue, a $17.0 million decrease in recurring contract development revenue generated under research and development contracts, and a $5.6 million decrease in product life cycle revenue (spare parts, accessories). The $81.6 million decrease in defense and security robots revenue was primarily due to a decrease in sales of higher price PackBot and SUGV units in 2012 as compared to 2011. Net average selling price decreased by 44.1% due to product mix primarily attributable to FirstLook units shipped in 2012 which have a lower selling price than the PackBot and SUGV units that comprised a larger portion of the units shipped in 2011. Total defense and security robots shipped in 2012 were 274 units compared to 752 units in 2011. The $17.0 million decrease in recurring contract development revenue generated under research and development contracts was primarily the result of decreases in government funding for our SUGV program. The $5.6 million decrease in product life cycle revenue is due to reduction in spares associated with lower robot sales and a decrease in PackBot upgrades.
Cost of Revenue
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
Total cost of revenue
$
241,896

 
$
257,847

 
$
(15,951
)
 
(6.2
)%
As a percentage of total revenue
55.4
%
 
55.4
%
 
 
 
 
Total cost of revenue decreased to $241.9 million in fiscal 2012, compared to $257.8 million in fiscal 2011. The decrease is primarily due to the 63.6% decrease in defense and security units shipped and the product mix of those units, as well as excess and obsolete inventory costs, offset by the 18.2% increase in home robot units shipped in fiscal 2012 as compared to fiscal 2011, as well as favorable adjustments relating to reductions in our international warranty accrual for our home robots business that were directly attributable to declining warranty cost experience.

33


Gross Margin
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
Total gross margin
$
194,348

 
$
207,653

 
$
(13,305
)
 
(6.4
)%
As a percentage of total revenue
44.6
%
 
44.6
%
 
 
 
 
Gross margin decreased $13.3 million, or 6.4%, to $194.3 million (44.6% of revenue) in fiscal 2012 from $207.7 million (44.6% of revenue) in fiscal 2011. Home robots business unit gross margin increased 5.3 percentage points, while the defense and security robots business unit gross margin decreased 10.3 percentage points. The 5.3 percentage point increase in the home robots business unit is attributable to favorable adjustments to our return provision due to gradual improvement in returns resulting from sustained investment in product quality, changes in customer and product mix to higher margin home robots products including the introduction of our Roomba 700 series and Scooba 230 robots, favorable adjustments relating to reductions in our international warranty accrual for our home robots business that were directly attributable to declining warranty cost experience, and improved leverage of our overhead expense against higher revenue in fiscal 2012 as compared to fiscal 2011. The 10.3 percentage point decrease in the defense and security robots business unit is primarily attributable to unfavorable absorption of our overhead expense against lower revenue, restructuring charges, scrap, rework and excess and obsolete inventory costs in fiscal 2012 as compared to fiscal 2011, and product mix primarily attributable to the lower-margin FirstLook units shipped in fiscal 2012 compared to PackBot and SUGV units shipped in fiscal 2011.
Research and Development
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
Total research and development
$
57,066

 
$
60,100

 
$
(3,034
)
 
(5.0
)%
As a percentage of total revenue
13.1
%
 
12.9
%
 
 
 
 
Research and development expenses decreased $3.0 million, or 5.0%, to $57.1 million (13.1% of revenue) in fiscal 2012 from $60.1 million (12.9% of revenue) in fiscal 2011. The decrease in research and development expenses is primarily due to decreases in compensation associated with decreased headcount, partially offset by increased efforts in the areas of product development, including our efforts associated with the RP-VITA (Remote Presence Virtual + Independent Telemedicine Assistant) product that was jointly developed with, and is sold by, InTouch Technologies, Inc.
Selling and Marketing
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
Total selling and marketing
$
66,412

 
$
50,477

 
$
15,935

 
31.6
%
As a percentage of total revenue
15.2
%
 
10.8
%
 
 
 
 
Selling and marketing expenses increased by $15.9 million, or 31.6%, to $66.4 million (15.2% of revenue) in fiscal 2012 from $50.5 million (10.8% of revenue) in fiscal 2011. This increase was primarily attributable to our 2012 multi-media advertising campaign focused on our domestic market for home robot products, including $3.3 million of selling and marketing expenses in the three-month period ended December 29, 2012 related to our newly acquired Braava (formerly Mint) floor sweeping robot, and increases in advertising as part of our continued global marketing and branding efforts.
General and Administrative
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
General and administrative
$
45,698

 
$
43,753

 
$
1,945

 
4.4
%
As a percentage of total revenue
10.5
%
 
9.4
%
 
 
 
 

34



General and administrative expenses increased by $1.9 million, or 4.4%, to $45.7 million (10.5% of revenue) in fiscal 2012 from $43.8 million (9.4% of revenue) in fiscal 2011. This increase is primarily attributable to increases in stock-based compensation expense, legal expense primarily attributable to our international expansion and intellectual property prosecution and enforcement, depreciation, compensation and employee benefits expense, partially offset by a decrease in incentive compensation expense in fiscal 2012 as compared to fiscal 2011.
Other Income (Expense), Net
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
Other Income (expense), net
$
435

 
$
218

 
$
217

 
99.5
%
As a percentage of total revenue
0.1
%
 
%
 
 
 
 

Other income (expense), net, amounted to $0.4 million and $0.2 million for fiscal 2012 and fiscal 2011, respectively, and consisted primarily of interest income partially offset by foreign currency exchange losses resulting from foreign currency exchange rate fluctuations.
 
Income Tax Provision
 
Fiscal Year Ended
 
 
 
 
 
December 29,
2012
 
December 31,
2011
 
Dollar Change
 
Percent Change
 
(In thousands)
Income tax provision
$
8,310

 
$
13,350

 
$
(5,040
)
 
(37.8
)%
As a percentage of pre-tax income
32.5
%
 
24.9
%
 
 
 
 
We recorded an income tax provision of $8.3 million and $13.4 million for fiscal 2012 and fiscal 2011, respectively. The $8.3 million income tax provision for fiscal 2012 was based upon a 2012 effective income tax rate of 30.3% plus a net income tax expense of $0.6 million primarily resulting from the true-up of prior year permanent items. The $13.4 million income tax provision for fiscal 2011 was based upon a 2011 effective income tax rate of 29.7% offset primarily by a net income tax benefit of $3.5 million resulting from the completion in the period of a comprehensive evaluation of our research and development tax credit and domestic manufacturing deductions.
The increase in the effective tax rate from 29.7% in 2011 to 30.3% in 2012 was primarily due to the expiration of the federal research and development tax credit, offset by a decrease in state taxes and a higher domestic manufacturing deduction as a percentage of income before taxes in 2012 as compared with 2011.
 
Liquidity and Capital Resources
At December 28, 2013, our principal sources of liquidity were cash and cash equivalents totaling $165.4 million, short-term investments of $22.0 million and accounts receivable of $39.3 million.
We manufacture and distribute our products through contract manufacturers and third-party logistics providers. We believe that this approach gives us the advantages of relatively low capital investment and significant flexibility in scheduling production and managing inventory levels. By leasing our office facilities, we also minimize the cash needed for expansion. Accordingly, our capital spending is generally limited to leasehold improvements, computers, office furniture, product-specific production tooling, internal use software and test equipment. In the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, we spent $6.8 million, $6.8 million and $13.0 million respectively, on capital equipment.
Our strategy for delivering home robots products to our distributors and retail customers gives us the flexibility to provide container shipments directly to the retailer from China and, alternatively, allows our distributors and retail partners to take possession of product on a domestic basis. Accordingly, our home robots product inventory consists of goods shipped to our third-party logistics providers for the fulfillment of distributor, retail and direct-to-consumer sales. Our inventory of defense and security products consists mostly of components, as finished goods are generally built to order. Our contract manufacturers are also responsible for purchasing and stocking components required for the production of our products, and they typically invoice us when the finished goods are shipped.

35


The balance of cash, cash equivalents and short-term investments of $187.4 million at December 28, 2013 is primarily the result of our increased profitability, as well as our on-going focus on managing working capital. In 2013, we generated $41.9 million of cash from operations. As of December 28, 2013, we did not have any borrowings outstanding under our working capital line of credit and had $1.6 million in letters of credit outstanding under our revolving letter of credit facility.
Discussion of Cash Flows
Comparison of Years Ended December 28, 2013 and December 29, 2012
Net cash provided by operating activities for the fiscal year ended December 28, 2013 was $41.9 million, an increase of $4.0 million compared to the $37.9 million of net cash provided by operating activities for the fiscal year ended December 29, 2012. The increase in net cash provided by operating activities was primarily driven by an increase in cash of $10.3 million resulting from net income of $27.6 million in 2013 compared to net income of $17.3 million in 2012, an increase in cash of $13.9 million resulting from an increase in accrued compensation of $7.8 million in 2013 compared to a decrease in accrued compensation of $6.1 million in 2012 reflecting a higher accrual for incentive compensation in 2013, an increase in cash of $6.9 million resulting from a decrease in accounts payable of $1.7 million in 2013 compared to a decrease in accounts payable of $8.7 million in 2012 as a result of normal purchasing and vendor payment activities, an increase in cash of $4.9 million resulting from a decrease in other assets of $2.0 million in 2013 compared to an increase in other assets of $2.9 million in 2012, resulting primarily from a decrease in prepaid income taxes in 2013 compared to an increase in prepaid income taxes in 2012, and an increase in cash of $3.0 million resulting from an increase in deferred income taxes of $0.8 million in 2013 compared to an increase of $3.8 million in 2012, resulting primarily from primarily the addition of deferred tax assets associated with the acquisition of Evolution Robotics in 2012 and the net effect of changes in deferred tax assets and liabilities associated with operating assets and liabilities. These increases were partially offset by a decrease in cash of $25.5 million resulting from an increase in accounts receivable (including unbilled revenue) of $9.9 million in 2013 compared to a decrease of $15.6 million in 2012, primarily due to an increase in 2013 revenue and an increase in the DSO (days sales outstanding) to 29 days in 2013 from 28 days in 2012, and a decrease in cash of $8.6 million resulting from an increase in inventory of $9.4 million in 2013 compared to an increase of $0.8 million in 2012, primarily due to an increase in 2013 revenue and an increase in the days of inventory on hand to 63 days in 2013 from 61 days in 2012.

Net cash used in investing activities for the fiscal year ended December 28, 2013 was $18.1 million, representing a decrease of $64.3 million compared to the $82.4 million of net cash used in investing activities for the fiscal year ended December 29, 2012. This decrease in net cash used in investing activities was primarily due to a decrease in cash paid for acquisitions and strategic investments of $78.5 million, with a strategic investment of $2.0 million in the preferred shares of InTouch Technologies, Inc. in 2013 compared to $74.5 million paid for the acquisition of Evolution Robotics and $6.0 million paid for the purchase of the preferred shares of InTouch Technologies, Inc. in 2012. This decrease was partially offset by cash used in the net purchase of marketable securities of $9.9 million in 2013 compared to the net sale of marketable securities of $4.9 million in 2012.
Net cash provided by financing activities for the fiscal year ended December 28, 2013 was $14.8 million, an increase of $9.8 million compared to the $5.0 million of net cash provided by financing activities for the fiscal year ended December 29, 2012. The increase is due primarily to an increase in the proceeds from stock option exercises of $9.3 million.
Comparison of Years Ended December 29, 2012 and December 31, 2011
Net cash provided by operating activities for the fiscal year ended December 29, 2012 was $37.9 million, a decrease of $17.9 million compared to the $55.7 million of net cash provided by operating activities for the fiscal year ended December 31, 2011. The decrease in net cash provided by operating activities was primarily driven by a decrease in cash of $22.9 million resulting from net income of $17.3 million in 2012 compared to net income of $40.2 million in 2011, as well as a decrease in cash of $18.4 million resulting from a decrease in accounts payable of $8.7 million in fiscal 2012 compared to a $9.7 million increase in accounts payable in fiscal 2011 as a result of normal purchasing and vendor payment activities, and a decrease of $9.9 million resulting from an increase in deferred tax assets of $3.8 million in 2012 compared to a decrease of $6.2 million in 2011, primarily due to the addition of deferred tax assets associated with the acquisition of Evolution Robotics and the net effect of changes in deferred tax assets and liabilities associated with operating assets and liabilities. These decreases were partially offset by an increase in cash of $24.4 million resulting from a decrease in accounts receivable (including unbilled revenue) of $16.7 million in fiscal 2012 compared to an increase of $7.6 million in 2011, primarily due to a decline in fiscal 2012 revenue and a reduction in the 2012 DSO (days sales outstanding) to 28 days from 32 days in 2011, as well as other net increases of $8.9 million due to normal operating activities.
Net cash used in investing activities for the fiscal year ended December 29, 2012 was $82.4 million, representing an increase of $65.2 million compared to the $17.2 million of net cash used in investing activities for the fiscal year ended December 31, 2011. This increase in net cash used in investing activities was primarily driven by the purchase of Evolution

36


Robotics, Inc. in 2012 for net cash of $74.5 million and an investment of $6.0 million in preferred shares of InTouch Technologies, Inc. in 2012. These increases were partially offset by proceeds from the net sale of investments of $4.9 million in 2012 compared to the net purchase of investments of $4.2 million in 2011, as well as a decrease in purchases of property and equipment of $6.2 million from fiscal 2011 to fiscal 2012 primarily due to a decrease in spending on self-constructed and demonstration assets, leasehold improvements and internal use software.
Net cash provided by financing activities for the fiscal year ended December 29, 2012 was $5.0 million, a decrease of $14.4 million compared to the $19.4 million of net cash provided by financing activities for the fiscal year ended December 31, 2011. The decrease is due primarily to a decrease in proceeds from stock option exercises of $9.1 million and a decrease in the tax benefit associated with excess stock-based compensation deductions of $5.5 million.
Working Capital Facilities
Credit Facility
We have an unsecured revolving credit facility with Bank of America, N.A., which is available to fund working capital and other corporate purposes. As of December 28, 2013, the total amount available for borrowing under our credit facility was $75.0 million and the full amount was available for borrowing. The interest on loans under our credit facility accrues, at our election, at either (1) LIBOR plus a margin, currently equal to 1.0%, based on our ratio of indebtedness to Adjusted EBITDA (the Eurodollar Rate), or (2) the lender’s base rate. The lender’s base rate is equal to the highest of (1) the federal funds rate plus 0.5%, (2) the lender’s prime rate and (3) the Eurodollar Rate plus 1.0%. The credit facility termination date is December 20, 2018.
As of December 28, 2013, we had no outstanding borrowings under our working capital line of credit. This credit facility contains customary terms and conditions for credit facilities of this type, including restrictions on our ability to incur or guaranty additional indebtedness, create liens, enter into transactions with affiliates, make loans or investments, sell assets, pay dividends or make distributions on, or repurchase, our stock, and consolidate or merge with other entities.
In addition, we are required to meet certain financial covenants customary with this type of agreement, including maintaining a minimum ratio of indebtedness to Adjusted EBITDA and a minimum specified interest coverage ratio.
This credit facility contains customary events of default, including for payment defaults, breaches of representations, breaches of affirmative or negative covenants, cross defaults to other material indebtedness, bankruptcy and failure to discharge certain judgments. If a default occurs and is not cured within any applicable cure period or is not waived, our obligations under the credit facility may be accelerated.
As of December 28, 2013, we were in compliance with all covenants under the revolving credit facility.
Letter of Credit Facility
We have an unsecured revolving letter of credit facility with Bank of America, N.A. The credit facility is available to fund letters of credit on our behalf up to an aggregate outstanding amount of $5 million. We may terminate at any time, subject to proper notice, or from time to time permanently reduce the amount of the credit facility.
We pay a fee on outstanding letters of credit issued under the credit facility of up to 1.5% per annum of the outstanding letters of credit. The maturity date for letters of credit issued under the credit facility must be no later than 365 days following the maturity date of the credit facility.
As of December 28, 2013, we had letters of credit outstanding of $1.6 million under our revolving letter of credit facility. The credit facility contains customary terms and conditions for credit facilities of this type, including restrictions on our ability to incur or guaranty additional indebtedness, create liens, enter into transactions with affiliates, make loans or investments, sell assets, pay dividends or make distributions on, or repurchase, our stock, and consolidate or merge with other entities. In addition, we are required to meet certain financial covenants customary with this type of agreement, including maintaining a minimum ratio of indebtedness to Adjusted EBITDA and a minimum specified ratio of EBIT to interest expense.
The credit facility also contains customary events of default, including for payment defaults, breaches of representations, breaches of affirmative or negative covenants, cross defaults to other material indebtedness, bankruptcy, and failure to discharge certain judgments. If a default occurs and is not cured within any applicable cure period or is not waived, the lender may accelerate the obligations under the credit facility.
As of December 28, 2013, we were in compliance with all covenants under the revolving letter of credit facility.
Working Capital and Capital Expenditure Needs
We currently have no material cash commitments, except for normal recurring trade payables, expense accruals and operating leases, all of which we anticipate funding through working capital, funds provided by operating activities and our

37


existing working capital line of credit. We do not currently anticipate significant investment in property, plant and equipment, and we believe that our outsourced approach to manufacturing provides us with flexibility in both managing inventory levels and financing our inventory. We believe our existing cash and cash equivalents, short-term investments, cash provided by operating activities, and funds available through our working capital line of credit will be sufficient to meet our working capital and capital expenditure needs over at least the next twelve months. In the event that our revenue plan does not meet our expectations, we may eliminate or curtail expenditures to mitigate the impact on our working capital. Our future capital requirements will depend on many factors, including our rate of revenue growth, the expansion of our marketing and sales activities, the timing and extent of spending to support product development efforts, the timing of introductions of new products and enhancements to existing products, the acquisition of new capabilities or technologies, and the continuing market acceptance of our products and services. Moreover, to the extent that existing cash and cash equivalents, short-term investments, cash from operations, and cash from short-term borrowing are insufficient to fund our future activities, we may need to raise additional funds through public or private equity or debt financing. As part of our business strategy, we may consider additional acquisitions of companies, technologies and products, which could also require us to seek additional equity or debt financing. Additional funds may not be available on terms favorable to us or at all.

Contractual Obligations
We generally do not enter into binding purchase commitments. Our principal commitments consist of obligations under our working capital line of credit, leases for office space and minimum contractual obligations for services. The following table describes our commitments to settle contractual obligations in cash as of December 28, 2013:
 
Payments Due by Period
 
Less Than
1  Year
 
1 to 3
Years
 
3 to 5
Years
 
More Than
5  Years
 
Total
 
(In thousands)
Operating leases
$
3,396

 
$
6,025

 
$
4,766

 
$
3,177

 
$
17,364

Minimum contractual payments
2,885

 

 

 

 
2,885

Other obligations
203

 
102

 

 

 
305

Total
$
6,484

 
$
6,127

 
$
4,766

 
$
3,177

 
$
20,554


Our minimum contractual obligations consist of obligations to key component suppliers for our home robots, which payments are incurred in the ordinary course of business. Other obligations consist of advertising agreements for corporate branding.
At December 28, 2013, we had outstanding purchase orders aggregating approximately $93.2 million. The purchase orders, the majority of which are with our contract manufacturers for the purchase of inventory in the normal course of business, are for manufacturing and non-manufacturing related goods and services, and are generally cancelable without penalty.  In circumstances where we determine that we have financial exposure associated with any of these commitments, we record a liability in the period in which that exposure is identified.

Off-Balance Sheet Arrangements
As of December 28, 2013, we had no off-balance sheet arrangements as defined in Item 303(a)(4) of Regulation S-K.
Recently Issued Accounting Pronouncements
In July 2013, the Financial Accounting Standards Board (“FASB”) issued an accounting standards update related to the presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists.  This new guidance clarifies guidance and eliminates diversity in practice on the presentation of unrecognized tax benefits when certain situations exist at the reporting date.  This new guidance is effective for annual reporting periods beginning on or after December 15, 2013 and subsequent interim periods.  We are currently assessing the impact, if any, on our consolidated financial statements.

38


In February 2013, the FASB issued guidance requiring disclosure of amounts reclassified out of accumulated other comprehensive income by component. In addition, an entity is required to present either on the face of the statement of operations or in the notes, significant amounts reclassified out of accumulated other comprehensive income by the respective line items of net income but only if the amount reclassified is required to be reclassified to net income in its entirety in the same reporting period. For amounts not reclassified in their entirety to net income, an entity is required to cross-reference to other disclosures that provide additional detail about those amounts. This guidance was effective prospectively for us for annual and interim periods beginning January 1, 2013. The impact of these amendments on our consolidated financial statements was not material.
From time to time, new accounting pronouncements are issued by FASB that are adopted by us as of the specified effective date. Unless otherwise discussed, we believe that the impact of recently issued standards, which are not yet effective, will not have a material impact on our consolidated financial statements upon adoption.
 
ITEM 7A.     QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Foreign Currency Exchange Risk
We maintain sales and business operations in foreign countries. As such, we have exposure to adverse changes in exchange rates associated with operating expenses of our foreign operations, but we believe this exposure to be immaterial. Additionally, we accept orders for home robots products in currencies other than the U.S. dollar. We regularly monitor the level of non-U.S. dollar accounts receivable balances to determine if any actions, including possibly entering into foreign currency forward contracts, should be taken to minimize the impact of fluctuating exchange rates on our results of operations. Our international revenue is primarily denominated in U.S. dollars and therefore any fluctuations in the Euro or any other non-U.S. dollar currencies will have minimal direct impact on our international revenue. However, as the U.S. dollar strengthens or weakens against other currencies, our international distributors may be impacted, which could affect their profitability and our ability to maintain current pricing levels on our international consumer products.

Interest Rate Sensitivity
At December 28, 2013, we had unrestricted cash and cash equivalents of $165.4 million and short term investments of $22.0 million. The unrestricted cash and cash equivalents are held for working capital purposes. We do not enter into investments for trading or speculative purposes. Some of the securities in which we invest, however, may be subject to market risk. This means that a change in prevailing interest rates may cause the fair market value of the investment to fluctuate. To minimize this risk in the future, we intend to maintain our portfolio of cash equivalents in a variety of securities, commercial paper, money market funds, debt securities and certificates of deposit. Due to the short-term nature of these investments, we believe that we do not have any material exposure to changes in the fair value of our investment portfolio as a result of changes in interest rates. As of December 28, 2013, all of our cash and cash equivalents were held in demand deposits and money market accounts.
Our exposure to market risk also relates to the increase or decrease in the amount of interest expense we must pay on any outstanding debt instruments, primarily certain borrowings under our working capital line of credit. The advances under the working capital line of credit bear a variable rate of interest determined at the time of the borrowing. At December 28, 2013, we had letters of credit outstanding of $1.6 million under our revolving letter of credit facility.



39


ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

iROBOT CORPORATION
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS


40


Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of
iRobot Corporation:

In our opinion, the accompanying consolidated balance sheets and the related consolidated statements of income, comprehensive income, stockholders’ equity and cash flows present fairly, in all material respects, the financial position of iRobot Corporation and its subsidiaries at December 28, 2013 and December 29, 2012, and the results of their operations and their cash flows for each of the three years in the period ended December 28, 2013 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 28, 2013 based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these financial statements, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements and on the Company's internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP

Boston, Massachusetts
February 18, 2014





41


iROBOT CORPORATION
CONSOLIDATED BALANCE SHEETS
 
 
December 28,
2013
 
December 29,
2012
 
(In thousands)
ASSETS
Current assets:
 
 
 
Cash and cash equivalents
$
165,404

 
$
126,770

Short term investments
21,954

 
12,430

Accounts receivable, net of allowance of $67 and $111 at December 28, 2013 and December 29, 2012, respectively
39,348

 
29,413

Unbilled revenue
856

 
1,196

Inventory
46,107

 
36,965

Deferred tax assets
20,144

 
19,266

Other current assets
6,848

 
8,853

Total current assets
300,661

 
234,893

Property and equipment, net
23,661

 
24,953

Deferred tax assets
10,095

 
8,792

Goodwill
48,751

 
48,951

Intangible assets, net
22,668

 
28,224

Other assets
10,501

 
8,500

Total assets
$
416,337

 
$
354,313

LIABILITIES, REDEEMABLE CONVERTIBLE PREFERRED AND
STOCKHOLDERS’ EQUITY
Current liabilities:
 
 
 
Accounts payable
$
41,344

 
$
42,515

Accrued expenses
14,880

 
13,642

Accrued compensation
19,606

 
11,864

Deferred revenue and customer advances
5,085

 
6,257

Total current liabilities
80,915

 
74,278

Long term liabilities
4,733

 
4,218

Commitments and contingencies (Note 11):

 

Redeemable convertible preferred stock, 5,000,000 shares authorized and no shares issued or outstanding

 

Common stock, $0.01 par value, 100,000,000 shares authorized; and 28,935,253 and 27,781,659 shares issued and outstanding at December 28, 2013 and December 29, 2012, respectively
289

 
278

Additional paid-in capital
227,175

 
199,903

Retained earnings
103,078

 
75,437

Accumulated other comprehensive income
147

 
199

Total stockholders’ equity
330,689

 
275,817

Total liabilities, redeemable convertible preferred stock and stockholders’ equity
$
416,337

 
$
354,313

See accompanying Notes to Consolidated Financial Statements


42


iROBOT CORPORATION
CONSOLIDATED STATEMENTS OF INCOME
 
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands, except per share amounts)
Revenue:
 
 
 
 
 
Product revenue
$
477,444

 
$
418,550

 
$
426,525

Contract revenue
9,957

 
17,694

 
38,975

Total revenue
487,401

 
436,244

 
465,500

Cost of revenue:
 
 
 
 
 
Cost of product revenue(1)
$
262,224

 
234,102

 
240,930

Cost of contract revenue
4,023

 
7,794

 
16,917

Total cost of revenue
266,247

 
241,896

 
257,847

Gross margin
221,154

 
194,348

 
207,653

Operating expenses:
 
 
 
 
 
Research and development(1)
63,649

 
57,066

 
60,100

Selling and marketing(1)
71,529

 
66,412

 
50,477

General and administrative(1)
53,358

 
45,698

 
43,753

Total operating expenses
188,536

 
169,176

 
154,330

Operating income
32,618

 
25,172

 
53,323

Other income (expense), net
(203
)
 
435

 
218

Income before income taxes
32,415

 
25,607

 
53,541

Income tax expense
4,774

 
8,310

 
13,350

Net income
$
27,641

 
$
17,297

 
$
40,191

Net income per share
 
 
 
 
 
Basic
$
0.97

 
$
0.63

 
$
1.50

Diluted
$
0.94

 
$
0.61

 
$
1.44

Number of shares used in per share calculations
 
 
 
 
 
Basic
28,495

 
27,577

 
26,712

Diluted
29,354

 
28,301

 
27,924

 __________________________
(1)
Stock-based compensation recorded in fiscal 2013, 2012, and 2011 breaks down by expense classification as follows:

 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Cost of product revenue
$
700

 
$
889

 
$
1,069

Research and development
2,700

 
1,904

 
1,349

Selling and marketing
1,246

 
808

 
724

General and administrative
8,763

 
7,382

 
5,642

See accompanying Notes to Consolidated Financial Statements


43



iROBOT CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Net income, as reported
$
27,641

 
$
17,297

 
$
40,191

Other comprehensive income (loss), net of tax:

 

 

Unrealized gains (losses) on investments, net of tax
(52
)
 
48
 
71
Total comprehensive income
$
27,589

 
$
17,345

 
$
40,262

See accompanying Notes to Consolidated Financial Statements


44


iROBOT CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
 
Common Stock
 
Additional
Paid-In
Capital
 
Retained
Earnings
(Accumulated
Deficit)
 
Accumulated
Other
Comprehensive
Income (Loss)
 
Stockholders’
Equity
 
Shares
 
Value
 
Balance at January 1, 2011
25,844,840

 
$
258

 
$
156,620

 
$
17,949

 
$
80

 
$
174,907

Issuance of common stock for exercise of stock options
1,232,721

 
13

 
13,388

 
 
 
 
 
13,401

Vesting of restricted stock units
167,875

 
1

 
(1
)
 
 
 
 
 

Tax benefit of excess stock based compensation deduction
 
 
 
 
6,370

 
 
 
 
 
6,370

Amortization of deferred compensation relating to stock options and restricted stock
 
 
 
 
8,784

 
 
 
 
 
8,784

Stock withheld to cover tax withholdings requirements upon vesting of restricted stock units
(28,881
)
 
 
 
(928
)
 
 
 
 
 
(928
)
Unrealized gain/(loss) on short term investment
 
 
 
 
 
 
 
 
71

 
71

Directors' deferred compensation
 
 
 
 
162

 
 
 
 
 
162

Net income
 
 
 
 
 
 
40,191

 
 
 
40,191

Balance at December 31, 2011
27,216,555

 
$
272

 
$
184,395

 
$
58,140

 
$
151

 
$
242,958

Issuance of common stock for exercise of stock options
390,956

 
4

 
4,322

 
 
 
 
 
4,326

Conversion of deferred compensation
823

 

 

 
 
 
 
 

Vesting of restricted stock units
204,053

 
2

 
(2
)
 
 
 
 
 

Tax benefit of excess stock based compensation deduction
 
 
 
 
902

 
 
 
 
 
902

Amortization of deferred compensation relating to stock options and restricted stock
 
 
 
 
10,983

 
 
 
 
 
10,983

Stock withheld to cover tax withholdings requirements upon vesting of restricted stock units
(30,728
)
 
 
 
(784
)
 
 
 
 
 
(784
)
Unrealized gain/(loss) on short term investment
 
 
 
 
 
 
 
 
48

 
48

Directors' deferred compensation
 
 
 
 
87

 
 
 
 
 
87

Net income
 
 
 
 
 
 
17,297

 
 
 
17,297

Balance at December 29, 2012
27,781,659

 
$
278

 
$
199,903

 
$
75,437

 
$
199

 
$
275,817

Issuance of common stock for exercise of stock options
840,951

 
8

 
13,621

 
 
 
 
 
13,629

Conversion of deferred compensation
9,780

 

 

 
 
 
 
 

Vesting of restricted stock units
348,141

 
3

 
(3
)
 
 
 
 
 

Tax benefit of excess stock based compensation deduction
 
 
 
 
1,413

 
 
 
 
 
1,413

Amortization of deferred compensation relating to stock options and restricted stock
 
 
 
 
13,409

 
 
 
 
 
13,409

Stock withheld to cover tax withholdings requirements upon vesting of restricted stock units
(45,278
)
 
 
 
(1,212
)
 
 
 
 
 
(1,212
)
Unrealized gain/(loss) on short term investment
 
 
 
 
 
 
 
 
(52
)
 
(52
)
Directors' deferred compensation
 
 
 
 
44

 
 
 
 
 
44

Net income
 
 
 
 
 
 
27,641

 
 
 
27,641

Balance at December 28, 2013
28,935,253

 
$
289

 
$
227,175

 
$
103,078

 
$
147

 
$
330,689

See accompanying Notes to Consolidated Financial Statements

45


iROBOT CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Cash flows from operating activities:
 
 
 
 
 
Net income
$
27,641

 
$
17,297

 
$
40,191

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization
12,169

 
11,672

 
10,312

Loss on disposal of property and equipment
189

 
1,332

 
599

Goodwill and intangible assets impairment
1,988

 

 

Stock-based compensation
13,409

 
10,983

 
8,784

Deferred income taxes, net
(768
)
 
(3,763
)
 
6,154

Tax benefit of excess stock based compensation deductions
(2,406
)
 
(1,445
)
 
(6,917
)
Non-cash director deferred compensation
44

 
87

 
162

Changes in operating assets and liabilities — (use) source
 
 
 
 
 
Accounts receivable
(9,935
)
 
15,560

 
(9,282
)
Unbilled revenue
340

 
1,166

 
1,650

Inventory
(9,365
)
 
(807
)
 
(3,929
)
Other assets
1,980

 
(2,892
)
 
(1,843
)
Accounts payable
(1,743
)
 
(8,684
)
 
9,717

Accrued expenses
1,255

 
(656
)
 
1,421

Accrued compensation
7,751

 
(6,106
)
 
52

Deferred revenue
(1,172
)
 
4,730

 
(2,007
)
Long term liabilities
515

 
(613
)
 
671

Net cash provided by operating activities
41,892

 
37,861

 
55,735

Cash flows from investing activities:
 
 
 
 
 
Additions of property and equipment
(6,829
)
 
(6,770
)
 
(13,011
)
Change in other assets
(2,000
)
 
(6,000
)
 

Purchase of Evolution Robotics, Inc., net of cash received

 
(74,530
)
 

Purchase of investments
(17,946
)
 
(5,086
)
 
(9,189
)
Sales of investments
8,044

 
10,000

 
5,000

Proceeds from sale of assets
650

 

 

Net cash used in investing activities
(18,081
)
 
(82,386
)
 
(17,200
)
Cash flows from financing activities:
 
 
 
 
 
Income tax withholding payment associated with restricted stock vesting
(1,212
)
 
(784
)
 
(928
)
Proceeds from stock option exercises
13,629

 
4,326

 
13,401

Tax benefit of excess stock based compensation deductions
2,406

 
1,445

 
6,917

Net cash provided by financing activities
14,823

 
4,987

 
19,390

Net increase (decrease) in cash and cash equivalents
38,634

 
(39,538
)
 
57,925

Cash and cash equivalents, at beginning of period
126,770

 
166,308

 
108,383

Cash and cash equivalents, at end of period
$
165,404

 
$
126,770

 
$
166,308

Supplemental disclosure of cash flow information
 
 
 
 
 
Cash paid for income taxes
$
7,235

 
$
11,663

 
$
8,046

   Non-cash investing and financing activities:
 
 
 
 
 
     Transfer of inventory to property and equipment
223

 

 

     Additions of property and equipment included in accounts payable
572

 

 

See accompanying Notes to Consolidated Financial Statements


46


iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
1.
Nature of the Business
iRobot Corporation (“iRobot” or the “Company”) develops robotics and artificial intelligence technologies and applies these technologies in producing and marketing robots. The majority of the Company’s revenue is generated from product sales and, to a lesser extent, government and commercial research and development contracts.
 
2.
Summary of Significant Accounting Policies
Basis of Presentation
The accompanying consolidated financial statements include those of iRobot and its subsidiaries, after elimination of all intercompany accounts and transactions. In addition, certain prior year amounts have been reclassified to conform with the current year presentation. iRobot has prepared the accompanying consolidated financial statements in conformity with accounting principles generally accepted in the United States of America.
Reorganization
In fiscal year 2012, the Company initiated a reorganization that resulted in, among other things, the centralization of all of the Company's engineering and operations activities. This reorganization was completed at the beginning of fiscal year 2013. In conjunction with this reorganization, the Company reviewed the financial statement classification of its costs and expenses. As a result of this review, the Company decided to classify certain expenses differently than had been classified and presented in prior periods to provide a more clear understanding of the Company's financial performance. As part of this review, the Company also evaluated the impact of the reorganization on its segment reporting and determined that certain modifications were necessary to present the segment information as now viewed by the Company's chief operating decision maker. Although the classification of certain expenses on the income statement has changed in fiscal year 2013 as compared to prior periods, the Company recast the financial results of prior periods in a manner consistent with the fiscal year 2013 presentation for comparability purposes. The reclassified amounts reflected in the consolidated statements of income for the years ended December 29, 2012 and December 31, 2011 included herein conform to the fiscal year 2013 presentation. This reclassification of costs and expenses did not impact previously reported net income or earnings per share as the changes only impacted the categorization of costs within the consolidated statements of income for the periods in question. Consequently, the classification changes did not impact previously presented consolidated balance sheets, statements of cash flow or statements of stockholders' equity.
Revision of Consolidated Balance Sheet as of December 29, 2012
During the three month period ended March 30, 2013, the Company identified a classification error related to its reserves for uncertain tax positions on its December 29, 2012 consolidated balance sheet. The Company had recorded a gross income tax receivable in current assets and a gross uncertain tax positions liability against that receivable in current liabilities as of December 29, 2012. In addition, the Company misclassified certain liabilities for uncertain tax positions in current and long-term liabilities. The impact of the errors on the December 29, 2012 consolidated balance sheet was a decrease in Other Current Assets of $2.7 million, an increase in Other Assets of $0.2 million, a decrease in Accrued Expenses of $2.9 million, and an increase in Long-term Liabilities of $0.4 million. These adjustments were not considered to be material, individually or in the aggregate, to previously issued financial statements. The Company has revised its December 29, 2012 consolidated balance sheet to correct these errors as reflected herein. This revision had no impact on the consolidated statement of income, the consolidated statement of comprehensive income, or total cash flows from operating activities, investing activities, or financing activities.
Use of Estimates
The preparation of these financial statements in conformity with accounting principles generally accepted in the United States requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and disclosure of contingent assets and liabilities. On an ongoing basis, management evaluates these estimates and judgments, including those related to revenue recognition, sales returns, bad debts, warranty claims, inventory reserves, valuation of investments, valuation of goodwill and intangible assets, assumptions used in valuing stock-based compensation instruments and income taxes. The Company bases these estimates on historical and anticipated results, and trends and on various other assumptions that the Company believes are reasonable under the circumstances, including assumptions as to future events. These estimates form the basis for making judgments about the carrying values of assets and liabilities that are

47

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


not readily apparent from other sources. By their nature, estimates are subject to an inherent degree of uncertainty. Actual results may differ from the Company’s estimates.
Fiscal Year-End
The Company operates and reports using a 52-53 week fiscal year ending on the Saturday closest to December 31. Accordingly, the Company’s fiscal quarters will end on the Saturday that falls closest to the last day of the third month of each quarter.
Cash and Cash Equivalents
The Company considers all highly liquid investments with an original or remaining maturity of three months or less at the time of purchase to be cash equivalents. The Company invests its excess cash primarily in money market funds or savings accounts of major financial institutions. Accordingly, its cash equivalents are subject to minimal credit and market risk. At December 28, 2013 and December 29, 2012, cash equivalents were comprised of money market funds totaling $101.4 million and $88.1 million, respectively. These cash equivalents are carried at cost, which approximates fair value.
 
Short Term Investments
The Company’s investments are classified as available-for-sale and are recorded at fair value with any unrealized gain or loss recorded as an element of stockholders’ equity. The fair value of investments is determined based on quoted market prices at the reporting date for those instruments. As of December 28, 2013 and December 29, 2012, investments consisted of:
 
December 28,
2013
 
December 29,
2012
 
Cost
 
Fair
Market Value
 
Cost
 
Fair
Market Value
 
(In thousands)
Corporate and government bonds
$
22,134

 
$
21,954

 
$
12,980

 
$
12,430

Total short term investments
$
22,134

 
$
21,954

 
$
12,980

 
$
12,430

As of December 28, 2013, the Company’s investments had maturity dates ranging from November 2014 to March 2017. The Company invests primarily in investment grade securities and limits the amount of investment in any single issuer.
Revenue Recognition
The Company derives its revenue from product sales and, to a lesser extent, government and commercial research and development contracts. The Company sells products directly to customers and indirectly through resellers and distributors. The Company recognizes revenue from sales of robots under the terms of the customer agreement upon transfer of title and risk of loss to the customer, net of estimated returns, provided that collection is determined to be reasonably assured and no significant obligations remain. Sales to domestic resellers of home robots are typically subject to agreements allowing for limited rights of return, rebates and price protection. Accordingly, the Company reduces revenue for its estimates of liabilities for these rights of return at the time the related sale is recorded. The Company makes an estimate of sales returns for products sold by domestic resellers directly based on historical returns experience and other relevant data. The Company’s international distributor agreements do not currently allow for product returns and, as a result, no reserve for returns is established for this group of customers. The Company has aggregated and analyzed historical returns from domestic resellers and end users which form the basis of its estimate of future sales returns by resellers or end users. When a right of return exists, the provision for these estimated returns is recorded as a reduction of revenue at the time that the related revenue is recorded. If actual returns differ significantly from its estimates, such differences could have a material impact on the Company’s results of operations for the period in which the returns become known. The estimates for returns are adjusted periodically based upon historical rates of returns. The estimates and reserve for rebates and price protection are based on specific programs, expected usage and historical experience. Actual results could differ from these estimates.
Under cost-plus-fixed-fee (“CPFF”) type contracts, the Company recognizes revenue based on costs incurred plus a pro rata portion of the total fixed fee. Costs incurred include labor and material that are directly associated with individual CPFF contracts plus indirect overhead and general and administrative type costs based upon billing rates submitted by the Company to the Defense Contract Management Agency (“DCMA”). Annually, the Company submits final indirect billing rates to DCMA based upon actual costs incurred throughout the year. In the situation where the Company’s final actual billing rates are greater than the provisional rates currently in effect, the Company records a cumulative revenue adjustment in the period in which the rate differential is collected from the customer. These final billing rates are subject to audit by the Defense Contract Audit Agency (“DCAA”), which can occur several years after the final billing rates are submitted and may result in material

48

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


adjustments to revenue recognized based on estimated final billing rates. As of December 28, 2013, fiscal year 2007 is under audit by DCAA, and fiscal years 2008 through 2013 are open for audit by DCAA. In the situation where the Company’s anticipated actual billing rates will be lower than the provisional rates currently in effect, the Company records a cumulative revenue adjustment in the period in which the rate differential is identified. Revenue on firm fixed price (“FFP”) contracts is recognized using the percentage-of-completion method. For government product FFP contracts, revenue is recognized as the product is shipped or in accordance with the contract terms. Costs and estimated gross margins on contracts are recorded as revenue as work is performed based on the percentage that incurred costs compare to estimated total costs utilizing the most recent estimates of costs and funding. Changes in job performance, job conditions, and estimated profitability, including those arising from final contract settlements and government audits, may result in revisions to costs and income and are recognized in the period in which the revisions are determined. Since many contracts extend over a long period of time, revisions in cost and funding estimates during the progress of work have the effect of adjusting earnings applicable to past performance in the current period. When the current contract estimate indicates a loss, a provision is made for the total anticipated loss in the current period. Revenue earned in excess of billings, if any, is recorded as unbilled revenue. Billings in excess of revenue earned, if any, are recorded as deferred revenue.
Allowance for Doubtful Accounts
The Company maintains an allowance for doubtful accounts to provide for the estimated amount of accounts receivable that may not be collected. The allowance is based upon an assessment of customer creditworthiness, historical payment experience and the age of outstanding receivables.
Activity related to the allowance for doubtful accounts was as follows:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Balance at beginning of period
$
111

 
$
87

 
$
88

Provision

 
37

 

Deduction(*)
(44
)
 
(13
)
 
(1
)
Balance at end of period
$
67

 
$
111

 
$
87

_____________________  
(*)
Deductions related to allowance for doubtful accounts represent amounts written off against the allowance, less recoveries.
Inventory
Inventory is stated at the lower of cost or net realizable value with cost being determined using the first-in, first-out (FIFO) method. The Company maintains a reserve for inventory items to provide for an estimated amount of excess or obsolete inventory.
Activity related to the inventory reserve was as follows:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Balance at beginning of period
$
6,608

 
$
2,568

 
$
2,836

Provision
1,571

 
5,101

 
411

Deduction(*)
(2,899
)
 
(1,061
)
 
(679
)
Balance at end of period
$
5,280

 
$
6,608

 
$
2,568

 ___________________________
(*)
Deductions related to inventory reserve accounts represent amounts written off against the reserve.
 
Property and Equipment
Property and equipment are recorded at cost and consist primarily of computer equipment, leasehold improvements, business applications software and machinery. Depreciation is computed using the straight-line method over the estimated useful lives as follows:

49

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


 
Estimated
Useful Life
Computer and research equipment
3 years

Furniture
5

Machinery
2-5

Tooling
2-5

Business applications software
5-7

Capital leases and leasehold improvements
Term of lease

Expenditures for additions, renewals and betterments of plant and equipment are capitalized. Expenditures for repairs and maintenance are charged to expense as incurred. As assets are retired or sold, the related cost and accumulated depreciation are removed from the accounts and any resulting gain or loss is credited or charged to operations.
Long-Lived Assets, including Purchased Intangible Assets
The Company periodically evaluates the recoverability of long-lived assets, including other purchased intangible assets whenever events and changes in circumstances, such as reductions in demand or significant economic slowdowns in the industry, indicate that the carrying amount of an asset may not be fully recoverable. When indicators of impairment are present, the carrying values of the asset group are evaluated in relation to the future undiscounted cash flows of the underlying business. The net book value of the underlying asset is adjusted to fair value if the sum of the expected discounted cash flows is less than book value. Fair values are based on estimates of market prices and assumptions concerning the amount and timing of estimated future cash flows and assumed discount rates, reflecting varying degrees of perceived risk.
Goodwill
Goodwill is recorded as the difference, if any, between the aggregate consideration paid for an acquisition and the fair value of the net tangible and intangible assets acquired. The Company evaluates goodwill for impairment at the reporting unit level (operating segment or one level below an operating segment) annually or more frequently if the Company believes indicators of impairment exist. In accordance with the guidance, the Company is permitted to first assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If the Company concludes that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, then a two-step goodwill impairment test is performed.
The first step of the impairment test involves comparing the fair values of the applicable reporting units with their aggregate carrying values, including goodwill. If the carrying amount of a reporting unit exceeds the reporting unit's fair value, the Company performs the second step of the goodwill impairment test to determine the amount of impairment loss. The second step of the goodwill impairment test involves comparing the implied fair value of the affected reporting unit's goodwill with the carrying value of that goodwill. The Company completes the annual impairment evaluation during the fourth quarter each year.
 
Research and Development
Costs incurred in the research and development of the Company’s products, classified as cost of contract and research and development, are expensed as incurred.
Internal Use Software
The Company capitalizes costs associated with the development and implementation of software for internal use. At December 28, 2013 and December 29, 2012, the Company had $8.2 million and $8.3 million, respectively, of costs related to enterprise-wide software included in fixed assets. Capitalized costs are being amortized over the assets’ estimated useful lives. The Company has recorded $0.9 million, $1.0 million and $0.9 million of amortization expense for the years ended December 28, 2013, December 29, 2012 and December 31, 2011, respectively.
Concentration of Credit Risk and Significant Customers
Financial instruments which potentially expose the Company to concentrations of credit risk consist of accounts receivable. Management believes its credit policies are prudent and reflect normal industry terms and business risk. At December 28, 2013, two customers accounted for a total of 37% of the Company's accounts receivable balance, each of which was greater than 10% of the balance and each of whom secured their balance with guaranteed letters of credit. At December 29, 2012, three customers accounted for a total of 55% of the Company’s accounts receivable balance, each of which

50

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


was greater than 10% of the balance. Two of the customers accounting for 36% of the Company’s accounts receivable balance secured their balance with guaranteed letters of credit. For the years ended December 28, 2013, December 29, 2012 and December 31, 2011, revenue from U.S. federal government orders, contracts and subcontracts, represented 6.2%, 15.1% and 36.1% of total revenue, respectively. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, the Company generated an aggregate of 33.2%, 30.6% and 23.6%, respectively, of total revenue from its home robots distributor in Japan and a network of affiliated European distributors of its home robots.
The Company maintains its cash in bank deposit accounts at high quality financial institutions. The individual balances, at times, may exceed federally insured limits.
Stock-Based Compensation
The Company accounts for stock-based compensation through recognition of the fair value of the stock-based compensation as a charge against earnings. Stock-based compensation cost for stock options is estimated at the grant date based on each option’s fair-value as calculated by the Black-Scholes option-pricing model. Stock-based compensation cost for restricted stock awards and restricted stock units is measured based on the closing fair market value of the Company’s common stock on the date of grant. The Company recognizes stock-based compensation cost as expense ratably on a straight-line basis over the requisite service period, net of estimated forfeitures.
Advertising Expense
The Company expenses advertising costs as they are incurred. During the years ended December 28, 2013, December 29, 2012 and December 31, 2011 advertising expense totaled $38.2 million, $34.9 million and $20.4 million, respectively.
Net Income Per Share
The following table presents the calculation of both basic and diluted net income per share:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
Net income
$
27,641

 
$
17,297

 
$
40,191

Weighted-average shares outstanding
28,495

 
27,577

 
26,712

Dilutive effect of employee stock options and restricted shares
859

 
724

 
1,212

Diluted weighted average shares outstanding
29,354

 
28,301

 
27,924

Basic income per share
$
0.97

 
$
0.63

 
$
1.50

Diluted income per share
$
0.94

 
$
0.61

 
$
1.44

Potentially dilutive securities representing approximately 0.7 million, 0.8 million and 0.4 million shares of common stock for the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, respectively, were excluded from the computation of diluted earnings per share for these periods because their effect would have been antidilutive.
 
Income Taxes
The Company is subject to taxation in the United States and various states and foreign jurisdictions. Though the statute of limitations is closed for years prior to 2010, the IRS has completed and closed its examination for all fiscal periods prior to 2011. The statute of limitations for examinations by state tax authorities is closed for fiscal years prior to 2009. The Company's tax returns are currently under examination by certain states for the years 2009, 2010 and 2011. Federal carryforward attributes that were generated prior to fiscal year 2011, and state carryforward attributes that were generated prior to fiscal year 2009 may still be adjusted upon examination by the IRS or state tax authorities if they either have been or will be used in a period for which the statute of limitations is still open.
Deferred taxes are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates in effect in the years in which the differences are expected to reverse. Valuation allowances are provided if, based upon the weight of available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.
The Company monitors the realization of its deferred tax assets based on changes in circumstances, for example recurring periods of income for tax purposes following historical periods of cumulative losses or changes in tax laws or regulations. The Company's income tax provisions and its assessment of the ability to realize its deferred tax assets involve significant judgments and estimates.

51

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


In fiscal 2012, as part of the Company's acquisition accounting for the acquisition of Evolution Robotics, Inc., the Company recorded a valuation allowance of $2.7 million related to certain state tax attributes of Evolution Robotics, Inc. In fiscal 2013, the deferred tax asset and related valuation allowance were reduced by $0.6 million based on the final computation of certain pre-acquisition state tax attributes of Evolution Robotics, Inc. At December 28, 2013, the Company maintains a net valuation allowance of $2.1 million.
Comprehensive Income
Accumulated other comprehensive income includes unrealized gains and losses on certain investments. The differences between net income and comprehensive income were related to unrealized gains (losses) on investments, net of tax.
Fair Value Measurements
The authoritative guidance for fair value establishes a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value. These tiers include: Level 1, defined as observable inputs such as quoted prices in active markets; Level 2, defined as inputs other than quoted prices in active markets that are either directly or indirectly observable; and Level 3, defined as unobservable inputs in which little or no market data exists, therefore requiring an entity to develop its own assumptions.
Financial Assets
The Company’s financial assets measured at fair value on a recurring basis at December 28, 2013, were as follows:
 
Fair Value Measurements as of
 
December 28, 2013
Description
Level 1
 
Level 2
 
Level 3
 
(In thousands)
Assets:
 
 
 
 
 
Money market funds
$
101,441

 
$

 
$

Corporate and government bonds

 
21,954

 

Total assets measured at fair value
$
101,441

 
$
21,954

 
$


The Company’s financial assets measured at fair value on a recurring basis at December 29, 2012, were as follows:
 
Fair Value Measurements as of
 
December 29, 2012
Description
Level 1
 
Level 2
 
Level 3
 
(In thousands)
Assets:
 
 
 
 
 
Money market funds
$
88,144

 
$

 
$

Corporate bonds

 
12,430

 

Total assets measured at fair value
$
88,144

 
$
12,430

 
$

In each table above, the bond investments are valued based on observable market values as of the Company’s reporting date and are included in Level 2. The bond investments are recorded at fair value and marked-to-market at the end of each reporting period and realized and unrealized gains and losses are included in comprehensive income for that period. The fair value of the Company’s bond investments are included in short term investments in its consolidated balance sheets.
Non-financial Assets
The Company's non-financial assets, which include goodwill, intangible assets, and property, plant and equipment are not required to be measured at fair value on a recurring basis. However, the Company evaluates the non-financial assets for impairment if a trigger event occurs, or when an annual impairment test is performed. If the asset is determined to be impaired, the asset is required to be recorded at fair value.

52

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


Recent Accounting Pronouncements
In July 2013, the Financial Accounting Standards Board (“FASB”) issued an accounting standards update related to the presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists.  This new guidance clarifies guidance and eliminates diversity in practice on the presentation of unrecognized tax benefits when certain situations exist at the reporting date.  This new guidance is effective for annual reporting periods beginning on or after December 15, 2013 and subsequent interim periods.  We are currently assessing the impact, if any, on our consolidated financial statements.
In February 2013, the FASB issued guidance requiring disclosure of amounts reclassified out of accumulated other comprehensive income by component. In addition, an entity is required to present either on the face of the statement of operations or in the notes, significant amounts reclassified out of accumulated other comprehensive income by the respective line items of net income but only if the amount reclassified is required to be reclassified to net income in its entirety in the same reporting period. For amounts not reclassified in their entirety to net income, an entity is required to cross-reference to other disclosures that provide additional detail about those amounts. This guidance was effective prospectively for the Company for annual and interim periods beginning January 1, 2013. The impact of these amendments on the Company’s consolidated financial statements was not material.
From time to time, new accounting pronouncements are issued by FASB that are adopted by the Company as of the specified effective date. Unless otherwise discussed, the Company believes that the impact of recently issued standards, which are not yet effective, will not have a material impact on its consolidated financial statements upon adoption.
 
3.
Inventory
Inventory consists of the following at:
 
December 28,
2013
 
December 29,
2012
 
(In thousands)
Raw materials
$
8,520

 
$
8,849

Work in process

 
60

Finished goods
37,587

 
28,056

 
$
46,107

 
$
36,965


4.
Property and Equipment
Property and equipment consists of the following at:
 
December 28,
2013
 
December 29,
2012
 
(In thousands)
Computer and equipment
$
13,715

 
$
16,086

Furniture
1,845

 
2,762

Machinery
3,705

 
3,391

Tooling
12,228

 
10,147

Leasehold improvements
15,983

 
15,758

Business applications software
8,162

 
8,273

 
55,638

 
56,417

Less: accumulated depreciation
31,977

 
31,464

 
$
23,661

 
$
24,953

Depreciation expense for the years ended December 28, 2013, December 29, 2012 and December 31, 2011 was $8.1 million, $9.9 million, and $9.0 million, respectively.
 
5.
Other Assets
Other assets consists of the following at:

53

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


 
December 28,
2013
 
December 29,
2012
 
(In thousands)
Investment in Advanced Scientific Concepts, Inc.
$
2,500

 
$
2,500

Investment in InTouch Technologies, Inc.
8,001

 
6,000

 
$
10,501

 
$
8,500

In November 2007, the Company recorded an investment of $2.5 million in a series of preferred stock of Advanced Scientific Concepts, Inc. In January 2012, the Company recorded an investment of $6.0 million in a series of preferred stock of InTouch Technologies, Inc. ("InTouch"). In January 2013, the Company recorded an additional investment of $2.0 million of preferred stock of InTouch, bringing its total investment to $8.0 million. These investments are accounted for at cost. The Company regularly monitors these investments to determine if facts and circumstances have changed in a manner that would require a change in accounting methodology. Additionally, the Company regularly evaluates whether or not these investments have been impaired by considering such factors as economic environment, market conditions, operational performance and other specific factors relating to the businesses underlying the investments. If any such impairment is identified, a reduction in the carrying value of the investments would be recorded at that time. Since the Company believes the fair value of its investments is greater than the carrying value of its investments, it has not impaired these investments.
 
6.
Accrued Expenses
Accrued expenses consist of the following at:
 
December 28,
2013
 
December 29,
2012
 
(In thousands)
Accrued warranty
$
6,497

 
$
6,057

Accrued direct fulfillment costs
1,362

 
999

Accrued sales tax
831

 
719

Accrued rent
726

 
696

Accrued sales commissions
539

 
475

Accrued contractors
509

 
196

Accrued other
4,416

 
4,500

 
$
14,880

 
$
13,642

 
Accrued compensation consists of the following at:
 
December 28,
2013
 
December 29,
2012
 
(In thousands)
Accrued bonus
$
13,002

 
$
5,186

Accrued other compensation
6,604

 
6,678

 
$
19,606

 
$
11,864



7.
Revolving Line of Credit
The Company has an unsecured revolving credit facility with Bank of America, N.A., which is available to fund working capital and other corporate purposes. As of December 28, 2013, the total amount available for borrowing under its credit facility was $75.0 million and the full amount was available for borrowing. The interest on loans under the credit facility will accrue, at the Company's election, at either (1) LIBOR plus a margin, currently equal to 1.0%, based on the Company's ratio of indebtedness to Adjusted EBITDA (the "Eurodollar Rate"), or (2) the lender's base rate. The lender's base rate is equal to the highest of (1) the federal funds rate plus 0.5%, (2) the lender's prime rate and (3) the Eurodollar Rate plus 1.0%. The credit facility will terminate and all amounts outstanding thereunder will be due and payable in full on December 20, 2018.

54


As of December 28, 2013, the Company had no borrowings under its revolving credit facility. This credit facility contains customary terms and conditions for credit facilities of this type, including restrictions on the Company's ability to incur or guaranty additional indebtedness, create liens, enter into transactions with affiliates, make loans or investments, sell assets, pay dividends or make distributions on, or repurchase, the Company's stock, and consolidate or merge with other entities.
In addition, the Company is required to meet certain financial covenants customary with this type of agreement, including maintaining a minimum ratio of indebtedness to Adjusted EBITDA and a minimum specified interest coverage ratio.
This credit facility contains customary events of default, including for payment defaults, breaches of representations, breaches of affirmative or negative covenants, cross defaults to other material indebtedness, bankruptcy and failure to discharge certain judgments. If a default occurs and is not cured within any applicable cure period or is not waived, the Company's obligations under the credit facility may be accelerated.
As of December 28, 2013, the Company was in compliance with all covenants under its credit facility.
 
8.
Common Stock
Common stockholders are entitled to one vote for each share held and to receive dividends if and when declared by the Board of Directors and subject to and qualified by the rights of holders of the preferred stock. Upon dissolution or liquidation of the Company, holders of common stock will be entitled to receive all available assets subject to any preferential rights of any then outstanding preferred stock.
On February 25, 2013, the Company announced a stock repurchase program. Under the program, the Company may purchase up to $25 million of its common stock from March 28, 2013 to March 27, 2014. The Company had made no repurchases under the program as of December 28, 2013.
 
9.
Stock Option Plans and Stock-Based Compensation
The Company has options outstanding under four stock incentive plans: the 1994 Stock Option Plan (the “1994 Plan”), the 2004 Stock Option and Incentive Plan (the “2004 Plan”), the 2005 Stock Option and Incentive Plan (the "2005 Plan") and the Evolution Robotics, Inc. 2007 Stock Plan (the "2007 Plan" and together with the 1994 Plan, the 2004 Plan and the 2005 Plan, the “Plans”). The 2005 Plan is the only one of the four plans under which new awards may currently be granted. Under the 2005 Plan, which became effective October 10, 2005, 1,583,682 shares were initially reserved for issuance in the form of incentive stock options, non-qualified stock options, stock appreciation rights, deferred stock awards and restricted stock awards. Additionally, the 2005 Plan provides that the number of shares reserved and available for issuance under the plan will automatically increase each January 1, beginning in 2007, by 4.5% of the outstanding number of shares of common stock on the immediately preceding December 31. Stock options returned to the Plans, with the exception of the 2007 Plan, as a result of their expiration, cancellation or termination are automatically made available for issuance under the 2005 Plan. Eligibility for incentive stock options is limited to those individuals whose employment status would qualify them for the tax treatment associated with incentive stock options in accordance with the Internal Revenue Code of 1986, as amended. As of December 28, 2013, there were 4,003,676 shares available for future grant under the 2005 Plan.
Options granted under the Plans are subject to terms and conditions as determined by the compensation committee of the board of directors, including vesting periods. Options granted under the Plans are exercisable in full at any time subsequent to vesting, generally vest over periods from zero to five years , and expire seven or ten years from the date of grant or, if earlier, 60 or 90 days from employee termination. The exercise price of incentive stock options is typically equal to the closing price on the NASDAQ Global Market on the date of grant. The exercise price of nonstatutory options may be set at a price other than the fair market value of the common stock.
In conjunction with the acquisition of Evolution Robotics, Inc. on October 1, 2012, each outstanding and unvested incentive stock option held by Evolution employees as of the acquisition date was automatically converted into stock options of the Company under the same terms and conditions as were applicable to the original Evolution grants. The number of replacement options granted and the associated exercise prices were determined utilizing a conversion ratio as defined in the merger agreement. There were 114,248 incentive stock options issued by the Company as a result of this automatic conversion with exercise prices ranging from $2.55 to $4.81. All of these options were granted from the 2007 Plan, which was assumed by the Company as a result of the acquisition.
The Company recognized $4.8 million of stock-based compensation expense during the fiscal year ended December 28, 2013 for stock options. The unamortized fair value as of December 28, 2013 associated with these grants was $7.2 million with

55

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


a weighted-average remaining recognition period of 2.44 years. The Company expects to recognize associated stock-based compensation expense of $3.5 million, $2.1 million, $1.4 million and $0.2 million in 2014, 2015, 2016 and 2017, respectively.
The fair value of each option grant for the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011 was computed on the grant date using the Black-Scholes option-pricing model with the following assumptions:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
Risk-free interest rate
0.90% — 1.77%
 
0.63% — 0.90%
 
0.83% — 2.24%
Expected dividend yield
 
 
Expected life
4.03 — 4.21 years
 
4.12 — 4.18 years
 
4.11 — 4.31 years
Expected volatility
54.0% — 58.0%
 
63.0% — 64.0%
 
61.0% — 63.0%
The risk-free interest rate is derived from the average U.S. Treasury constant maturity rate, which approximates the rate in effect at the time of grant, commensurate with the expected life of the instrument. The dividend yield is zero based upon the fact the Company has never paid and has no present intention to pay cash dividends. The Company utilizes company specific historical data for purposes of establishing expected volatility and expected term.
Based upon the above assumptions, the weighted average fair value of each stock option granted for the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011 was $11.17, $13.23 and $16.55, respectively.
 
The table below summarizes stock option plan activity:
 
Number of
Shares
 
Weighted Average
Exercise Price
 
Weighted  Average
Remaining
Contractual Term
 
Aggregate
Intrinsic
Value(1)
Outstanding at January 1, 2011
3,657,035

 
$
13.40

 
 
 
 
Granted
349,650

 
33.27

 
 
 
 
Exercised
(1,232,721
)
 
10.87

 
 
 
 
Canceled
(212,672
)
 
15.37

 
 
 
 
Outstanding at December 31, 2011
2,561,292

 
$
17.17

 
 
 
 
Granted
547,948

 
19.70

 
 
 
 
Exercised
(390,956
)
 
11.07

 
 
 
 
Canceled
(214,617
)
 
21.91

 
 
 
 
Outstanding at December 29, 2012
2,503,667

 
$
18.27

 
 
 
 
Granted
293,325

 
24.60

 
 
 
 
Exercised
(840,951
)
 
16.21

 
 
 
 
Canceled
(185,666
)
 
22.16

 
 
 
 
Outstanding at December 28, 2013
1,770,375

 
$
19.89

 
3.99 years
 
$27.5 million
Vested and expected to vest at December 28, 2013
1,718,644

 
$
19.78

 
3.93 years
 
$26.9 million
Exercisable as of December 28, 2013
1,069,247

 
$
18.04

 
2.90 years
 
$18.6 million
Weighted average fair value of options granted during the fiscal year ended December 28, 2013
 
 
$
11.17

 
 
 
 
Options available for future grant at December 28, 2013
4,003,676

 
 
 
 
 
 
 _________________________
(1)
The aggregate intrinsic value on the table was calculated based upon the positive difference between the closing market value of the Company’s stock on December 28, 2013 of $35.41 and the exercise price of the underlying option.
During fiscal years 2013, 2012, and 2011, the total intrinsic value of stock options exercised was $12.1 million, $6.2 million and $25.4 million, respectively. No amounts relating to stock-based compensation have been capitalized.


56

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


The following table summarizes information about stock options outstanding at December 28, 2013:
 
 
Options Outstanding
 
Options Exercisable
Range of Exercise Prices
 
Number
Outstanding
 
Weighted Average
Remaining
Contractual Life
 
Weighted  Average
Exercise Price
Number
Exercisable
 
Weighted Average
Exercise Price
     $  2.33 - $ 7.76
 
207,041

 
4.11 years
 
$
5.65

 
157,154

 
$
6.00

        8.10 - 14.13
 
137,474

 
1.97
 
13.04

 
137,474

 
13.04

      14.52 - 14.52
 
246,122

 
3.13
 
14.52

 
200,541

 
14.52

      14.54 - 18.47
 
270,991

 
3.98
 
17.62

 
166,930

 
17.09

      18.61 - 22.20
 
100,970

 
2.24
 
20.62

 
89,246

 
20.72

      22.86 - 22.86
 
221,657

 
6.07
 
22.86

 
4,107

 
22.86

      24.00 - 25.99
 
244,975

 
3.82
 
24.86

 
146,955

 
24.50

      26.59 - 33.48
 
293,345

 
4.38
 
30.77

 
164,308

 
31.37

      33.72 - 34.67
 
43,300

 
6.57
 
33.98

 

 

      35.96 -  35.96
 
4,500

 
4.51
 
35.96

 
2,532

 
35.96

     $ 2.33 -  $35.96
 
1,770,375

 
3.99 years
 
$
19.89

 
1,069,247

 
$
18.04

The table below summarizes activity relating to restricted stock awards:
 
Number of
Shares Underlying
Restricted Stock
 
Weighted Average
Grant Date Fair
Value
Outstanding at January 1, 2011
5,582

 
$
16.03

Granted


 


Vested
(5,582
)
 
16.03

Forfeited


 


Outstanding at December 31, 2011

 
$

Granted


 


Vested

 

Forfeited


 


Outstanding at December 29, 2012

 
$

Granted


 


Vested

 

Forfeited


 


Outstanding at December 28, 2013

 
$

 
During the fiscal year ended December 28, 2013, the Company recognized $0.0 million of stock based compensation expense associated with restricted stock awards. As of December 28, 2013, the unamortized fair value of all restricted stock awards was $0.0 million.


57

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


The table below summarizes activity relating to restricted stock units:
 
Number of
Shares Underlying
Restricted Stock
 
Weighted Average
Grant Date Fair
Value
Outstanding at January 1, 2011
570,077

 
$
15.14

Granted
282,744

 
32.08

Vested
(168,041
)
 
15.31

Forfeited
(77,275
)
 
16.73

Outstanding at December 31, 2011
607,505

 
$
22.77

Granted
685,529

 
24.62

Vested
(204,053
)
 
21.24

Forfeited
(147,951
)
 
25.07

Outstanding at December 29, 2012
941,030

 
$
24.09

Granted
521,056

 
25.87

Vested
(348,141
)
 
22.57

Forfeited
(186,291
)
 
24.91

Outstanding at December 28, 2013
927,654

 
$
25.50

During the fiscal year ended December 28, 2013, the Company recognized $8.6 million of stock based compensation expense associated with restricted stock units. As of December 28, 2013, December 29, 2012 and December 31, 2011, the unamortized fair value of all restricted stock units was $17.5 million, $17.9 million and $11.7 million, respectively. The Company expects to recognize associated stock-based compensation expense of $7.6 million, $5.3 million, $3.6 million and $1.0 million in 2014, 2015, 2016 and 2017, respectively.

10.
Income Taxes
The components of income tax expense were as follows:
 
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Current
 
 
 
 
 
Federal
$
6,363

 
$
12,540

 
$
10,088

State
1,124

 
473

 
1,600

Foreign
41

 
(8
)
 
196

Total current tax provision
7,528

 
13,005

 
11,884

Deferred
 
 
 
 
 
Federal
(2,026
)
 
(4,003
)
 
2,166

State
(728
)
 
(692
)
 
(700
)
Total deferred tax provision
(2,754
)
 
(4,695
)
 
1,466

Total income tax provision
$
4,774

 
$
8,310

 
$
13,350

In certain jurisdictions, an insignificant provision has been made for deferred taxes on undistributed earnings of non-U.S. subsidiaries that the Company expects to distribute in 2014. In other jurisdictions, for the remaining undistributed earnings of non-U.S. subsidiaries, no provision has been made for deferred taxes as these earnings have been indefinitely reinvested. As of December 28, 2013, a deferred tax liability has not been established for approximately $0.4 million of cumulative undistributed earnings of non-U.S. subsidiaries, as the Company plans to keep these amounts permanently reinvested overseas. Determination of the amount of unrecognized deferred tax liability on these undistributed earnings is not practicable and such amount would not be material.


58

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


The components of net deferred tax assets were as follows:
 
December 28,
2013
 
December 29,
2012
 
(In thousands)
Net deferred tax assets
 
 
 
Current deferred tax assets
 
 
 
Reserves and accruals
$
18,554

 
$
17,273

Stock-based compensation
556

 
1,784

Net operating loss carryforwards
2,470

 
2,470

Foreign tax credits
105

 
133

Valuation allowance
(1,100
)
 
(1,390
)
Total current deferred tax assets
20,585

 
20,270

Non-current deferred tax assets
 
 
 
Reserves and accruals
715

 
182

Tax credits
5,737

 
4,780

Fixed assets
1,308

 
280

Stock-based compensation
4,957

 
4,851

Net operating loss carryforwards
6,587

 
9,664

Valuation allowance
(990
)
 
(1,301
)
Total non-current deferred tax assets
18,314

 
18,456

Current deferred tax liabilities
 
 
 
Prepaids
441

 
649

Total current deferred tax liabilities
441

 
649

Non-current deferred tax liabilities
 
 
 
Intangible assets
8,219

 
10,019

Total non-current deferred tax liabilities
8,219

 
10,019

Total net deferred tax assets
$
30,239

 
$
28,058

In fiscal 2012, as part of the Company's acquisition accounting for the acquisition of Evolution Robotics, Inc., the Company recorded a valuation allowance of $2.7 million related to certain state tax attributes of Evolution Robotics, Inc. In fiscal 2013, the deferred tax asset and related valuation allowance were reduced by $0.6 million based on the final computation of certain pre-acquisition state tax attributes of Evolution Robotics, Inc. At December 28, 2013, the Company has a total net valuation allowance of $2.1 million.
The table below summarizes activity relating to the valuation allowance:
Fiscal Year Ended
Balance at
beginning  of
period
 
Additions
Charged to
Costs and
Expenses
 
Additions Charged to Goodwill
 
Deductions
 
Balance
at End
of Period
 
(In thousands)
December 31, 2011
$

 

 

 

 
$

December 29, 2012
$

 

 
2,691

 

 
$
2,691

December 28, 2013
$
2,691

 

 

 
601

 
$
2,090

The net deferred tax assets after valuation allowance as of December 28, 2013 and December 29, 2012 were $30.2 million and $28.1 million, respectively.
As of December 28, 2013, the Company has net operating loss carryforwards available to offset future federal and state taxes of $45.0 million, research and development credit carryforwards available to offset future federal and state taxes of $8.9 million and investment tax credit carryforwards to offset future state taxes of $0.6 million, which expire at various dates from 2016 to 2033. As of December 29, 2012, the Company had net operating loss carryforwards available to offset future federal and state taxes of $62.9 million, research and development credit carryforwards available to offset future federal and state taxes

59

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


of $7.4 million, and investment tax credit carryforwards to offset future state taxes of $0.6 million, which expire at various dates from 2013 to 2032. Under the Internal Revenue Code, certain substantial changes in the Company’s ownership could result in an annual limitation on the amount of these tax carryforwards which can be utilized in future years. As of December 28, 2013, the Company has $45.0 million of net operating loss carryforwards and $2.2 million of federal and state research and development credits related to the acquisition of Evolution Robotics that are limited by Section 382 and Section 383, respectively, of the Internal Revenue Code. However, these limitations are not expected to cause any of these net operating loss carryforwards or federal and state research and development credits to expire unused.
 
The reconciliation of the expected tax (benefit) expense (computed by applying the federal statutory rate to income before income taxes) to actual tax expense was as follows:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Expected federal income tax
$
11,345

 
$
8,962

 
$
18,739

Miscellaneous permanent items
405

 
338

 
(13
)
State taxes (net of federal benefit)
867

 
497

 
543

Federal and state credits
(3,909
)
 
(418
)
 
(3,283
)
Domestic production activities deduction
(1,168
)
 
(1,100
)
 
(2,695
)
Other
(70
)
 
31

 
59

Settlement of uncertain tax positions
(2,696
)
 

 

 
$
4,774

 
$
8,310

 
$
13,350

 
A summary of the Company’s adjustments to its gross unrecognized tax benefits, inclusive of interest, in the current year is as follows:
 
Fiscal Year Ended
 
December 28, 2013
Balance at beginning of period
$
4,469

Increase for tax positions related to the current year
355

Increase for tax positions related to prior years
490

Decreases for settlements with applicable taxing authorities
(2,696
)
Decreases for lapses of statute of limitations

Balance at end of period
$
2,618



The Company recognizes interest and penalties related to unrecognized tax benefits in its income tax provision. As of December 28, 2013, December 29, 2012 and December 31, 2011, there were no material amounts related to accrued interest or penalties. We anticipate the settlement of tax audits may be finalized within the next twelve months and could result in a decrease in our unrecognized tax benefits of up to $0.7 million. If all of our unrecognized tax benefits as of December 28, 2013 were to become recognizable in the future, we would record a $1.9 million benefit to the income tax provision, reflective of federal benefit on state items.
Included in the Company’s state tax credit carryforwards as of December 28, 2013 and December 29, 2012 were unrecognized tax benefits related to stock-based compensation beginning from January 1, 2006 of $0.5 million and $0.5 million, respectively, which will be credited to additional paid-in capital when they reduce income taxes payable. Therefore, these amounts were not included in the Company’s gross or net deferred tax assets at December 28, 2013 and December 29, 2012.
The Company follows the with and without approach for direct and indirect effects of windfall tax deductions.
 

60

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


11.
Commitments and Contingencies
Legal
From time to time and in the ordinary course of business, the Company is subject to various claims, charges and litigation. The outcome of litigation cannot be predicted with certainty and some lawsuits, claims or proceedings may be disposed of unfavorably to us, which could materially affect the Company's financial condition or results of operations.
Lease Obligations
The Company leases its facilities. Rental expense under operating leases for fiscal 2013, 2012 and 2011 amounted to $5.3 million, $4.4 million, and $4.1 million, respectively. Future minimum rental payments under operating leases were as follows as of December 28, 2013:
 
 
Operating
Leases
2013
$
3,396

2014
3,363

2015
2,662

2016
2,383

2017
2,383

Thereafter
3,177

Total minimum lease payments
$
17,364

Outstanding Purchase Orders
At December 28, 2013, we had outstanding purchase orders aggregating approximately $93.2 million. The purchase orders, the majority of which are with our contract manufacturers for the purchase of inventory in the normal course of business, are for manufacturing and non-manufacturing related goods and services, and are generally cancelable without penalty.  In circumstances where we determine that we have financial exposure associated with any of these commitments, we record a liability in the period in which that exposure is identified.
Guarantees and Indemnification Obligations
The Company enters into standard indemnification agreements in the ordinary course of business. Pursuant to these agreements, the Company indemnifies and agrees to reimburse the indemnified party for losses incurred by the indemnified party, generally the Company’s customers, in connection with any patent, copyright, trade secret or other proprietary right infringement claim by any third party with respect to the Company’s software. The term of these indemnification agreements is generally perpetual any time after execution of the agreement. The maximum potential amount of future payments the Company could be required to make under these indemnification agreements is unlimited. The Company has never incurred costs to defend lawsuits or settle claims related to these indemnification agreements. As a result, the Company believes the estimated fair value of these agreements is minimal. Accordingly, the Company has no liabilities recorded for these agreements as of December 28, 2013 and December 29, 2012, respectively.
 
Government Contract Contingencies
Several of the Company’s prime contracts with the U.S. federal government do not contain a limitation of liability provision, creating a risk of responsibility for direct and consequential damages. Several subcontracts with prime contractors hold the prime contractor harmless against liability that stems from our work and do not contain a limitation of liability. These provisions could cause substantial liability for the Company. In addition, the Company is subject to audits by the U.S. federal government as part of routine audits of government contracts. As part of an audit, these agencies may review the Company’s performance on contracts, cost structures and compliance with applicable laws, regulations and standards. If any of its costs are found to be allocated improperly to a specific contract, the costs may not be reimbursed and any costs already reimbursed for such contract may have to be refunded. Accordingly, an audit could result in a material adjustment to our revenue and results of operations. Annually, the Company submits final indirect billing rates to DCMA based upon actual costs incurred throughout the year. These final billing rates are subject to audit by DCAA. As of December 28, 2013, fiscal year 2007 is under audit by DCAA, and fiscal years 2008 through 2013 are open for audit by DCAA.
Warranty

61

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


The Company provides warranties on most products and has established a reserve for warranty based on identified warranty costs. The reserve is included as part of accrued expenses (Note 6) in the accompanying consolidated balance sheets.
Activity related to the warranty accrual was as follows:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Balance at beginning of period
$
6,057

 
$
10,306

 
$
9,284

Provision (*)
1,744

 
(1,682
)
 
4,091

Warranty usage(**)
(1,304
)
 
(2,567
)
 
(3,069
)
Balance at end of period
$
6,497

 
$
6,057

 
$
10,306

 __________________________________
(*)
During 2012, the Company recorded favorable adjustments relating to reductions in its international warranty accrual for our home robots business related to our sustained improvements in product quality, resulting in a net credit for its 2012 warranty provision.
(**)
Warranty usage includes costs incurred for warranty obligations.

Sales Taxes
The Company collects and remits sales tax in jurisdictions in which it has a physical presence or it believes nexus exists, which therefore obligates the Company to collect and remit sales tax. The Company continually evaluates whether it has established a nexus in new jurisdictions with respect to sales tax. The Company has recorded a liability for potential exposure in several states where there is uncertainty about the point in time at which the Company established a sufficient business connection to create nexus. The Company continues to analyze possible sales tax exposure, but does not currently believe that any individual claim or aggregate claims that might arise will ultimately have a material effect on its consolidated results of operations, financial position or cash flows.
 
12.
Employee Benefits
The Company sponsors a retirement plan under Section 401(k) of the Internal Revenue Code (the “Retirement Plan”). All Company employees, with the exception of temporary, contract and international employees are eligible to participate in the Retirement Plan after satisfying age and length of service requirements prescribed by the plan. Under the Retirement Plan, employees may make tax-deferred contributions, and the Company, at its sole discretion, and subject to the limits prescribed by the IRS, may make either a nonelective contribution on behalf of all eligible employees or a matching contribution on behalf of all plan participants.
The Company elected to make a matching contribution of approximately $1.5 million, $1.7 million and $1.7 million for the plan years ended December 28, 2013, December 29, 2012 and December 31, 2011 (“Plan-Year 2013,” “Plan-Year 2012” and “Plan-Year 2011”), respectively. The employer contribution represents a matching contribution at a rate of 50% of each employee’s first six percent contribution. Accordingly, each employee participating during Plan-Year 2013, Plan-Year 2012 and Plan-Year 2011 is entitled up to a maximum of three percent of his or her eligible annual payroll. The employer matching contribution for Plan-Year 2013 is included in accrued compensation in the accompanying consolidated balance sheet.
 
13.
Acquisition of Evolution Robotics, Inc.

On October 1, 2012, the Company acquired 100% of the equity of Evolution Robotics, Inc. (Evolution) for $74.8 million in cash, including the effect of working capital adjustments and cash received, with $8.88 million of the purchase price placed into an escrow account to settle certain claims for indemnification for breaches or inaccuracies in Evolution’s representations and warranties, covenants and agreements. Evolution was the developer of Mint and Mint Plus automatic floor cleaning robots, based in Pasadena, California, and is included in the Company's home robots business unit.
Pro Forma Disclosures (Unaudited)
The following unaudited pro forma consolidated results of operations for fiscal 2012 and fiscal 2011 assume that the acquisition of Evolution occurred as of January 2, 2011.

62

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


 
Fiscal Year Ended
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Revenue
$
445,469

 
$
482,850

Net Income
8,723

 
31,778

These pro forma amounts do not purport to be indicative of the results that would have actually been obtained if the acquisitions had occurred at the beginning of the periods presented or that may be obtained in the future.

14.
Goodwill and other intangible assets
The carrying amount of the goodwill at December 28, 2013 is $48.8 million. $41.0 million resulted from the acquisition of Evolution Robotics, Inc. in October 2012 and was assigned to the home robots reporting unit. $7.7 million (net of a subsequent write-down of $0.2 million) resulted from the acquisition of Nekton Research, LLC completed in September 2008 and was assigned to the defense and security reporting unit. In conjunction with the reorganization completed as of the beginning of the fiscal year 2013, the defense and security reporting unit was divided into two reporting units: the defense and security reporting unit and the research reporting unit. As a result, the goodwill of $7.9 million was reassigned utilizing a relative fair value allocation approach. $7.7 million and $0.2 million were reassigned to the defense and security and research reporting units, respectively.
During the second quarter of 2013, the Company decided to refocus its funded research activities. The Company considered this decision to be an impairment indicator, requiring an interim impairment test within the research reporting unit. The Company performed an impairment assessment using the income approach, and determined that goodwill was impaired. The Company recorded an impairment loss of $0.2 million within general and administrative expenses during the fiscal year ended December 28, 2013.
In the fourth quarter of 2013, the Company completed its annual goodwill impairment test. The first step of the two-step impairment test, which involves comparing the fair values of the applicable reporting units with their aggregate carrying values, including goodwill, was completed, and the Company did not identify any additional goodwill impairment.
Other intangible assets include the value assigned to completed technology, research contracts, and trade names. The estimated useful lives for all of these intangible assets are two to ten years. The intangible assets are being amortized on a straight-line basis, which is consistent with the pattern that the estimated economic benefits of the intangible assets are expected to be utilized.
Intangible assets at December 28, 2013 and December 29, 2012 consisted of the following:
 
December 28, 2013
 
December 29, 2012
 
Cost
 
Accumulated
Amortization
 
Impairment Loss
 
Net
 
Cost
 
Accumulated
Amortization
 
Net
 
(In thousands)
Completed technology
$
30,600

 
$
6,202

 
1,788

 
$
22,610

 
$
30,600

 
$
2,468

 
$
28,132

Research contracts
100

 
100

 

 

 
100

 
100

 

Tradename
800

 
742

 

 
58

 
800

 
708

 
92

Total
$
31,500

 
$
7,044

 
$
1,788

 
$
22,668

 
$
31,500

 
$
3,276

 
$
28,224

As part of the Company's decision during 2013 to refocus its funded research activities, the Company decided to no longer pursue certain research contracts in which completed technology acquired as part of the acquisition of Nekton Research, LLC was utilized. As a result, the Company performed an impairment assessment of the associated intangible asset using the income approach, and recorded an impairment loss of $1.8 million within general and administrative expenses during the fiscal year ended December 28, 2013.
Amortization expense related to acquired intangible assets was $3.8 million, $1.2 million, and $0.9 million for the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, respectively. The estimated future amortization expense related to current intangible assets in each of the five succeeding fiscal years is expected to be as follows:
 

63

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


 
(In thousands)
2014
$
3,522

2015
3,482

2016
3,457

2017
3,457

2018
3,457

Total
$
17,375

 
15.
Restructuring charges

In 2013, 2012 and 2011, the Company incurred restructuring charges of $3.3 million. $3.7 million, and $1.0 million, respectively. The restructuring charges incurred in 2013 primarily related to a $1.8 million write-down of an intangible asset, costs associated with the closing of its San Luis Obispo, California office and severance-related costs. The restructuring charges incurred in 2012 and 2011 primarily consisted of cost reductions in its defense and security business unit in 2012 and 2011, which resulted in workforce reductions and the write-off of certain inventory and fixed assets.
The activity for the restructuring programs is presented below:
 
 
 
 
 
 
 
Fiscal Year Ended
 
December 28, 2013
 
December 29, 2012
 
December 31, 2011
 
(In thousands)
Balance at beginning of period
$
197

 
$

 

Charges
3,296

 
3,679

 
1,015

Utilization
(2,818
)
 
(3,482
)
 
(1,015
)
Balance at end of period
$
675

 
$
197

 
$




16.
Industry Segment, Geographic Information and Significant Customers
The Company operates in two reportable segments, the home robots business unit and the defense and security robots business unit. The nature of products and types of customers for the two segments vary significantly. As such, the segments are managed separately.
 
Home Robots
The Company’s home robots business unit offers products to consumers through a network of retail businesses throughout the United States, to various countries through international distributors and retailers, and through the Company’s on-line store. The Company’s home robots business unit includes mobile robots used in the maintenance of households.
Defense and Security Robots
The Company’s defense and security robots business unit offers products to the U.S. Department of Defense through a small U.S. government-focused sales force, and to other North American and international entities through small domestic and international sales teams, as well as through North American and international distributors. The Company’s defense and security robots are used to increase warfighters', law enforcement, security forces and first responders' safety and productivity.
Other
The Company’s other revenue and cost of revenue result from other smaller business units that do not meet the criteria of a reportable segment, as well as certain operational costs included in cost of revenue.

64

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


The table below presents segment information about revenue, cost of revenue, gross margin and income before income taxes:
 
Fiscal Year Ended
 
December 28,
2013
 
December 29,
2012
 
December 31,
2011
 
(In thousands)
Revenue:
 
 
 
 
 
Home Robots
$
427,853

 
$
356,805

 
$
278,551

Defense & Security Robots
50,003

 
70,948

 
175,119

Other
9,545

 
8,491

 
11,830

Total revenue
487,401

 
436,244

 
465,500

Cost of revenue:
 
 
 
 
 
Home Robots
217,011

 
174,756

 
151,299

Defense & Security Robots
24,975

 
40,468

 
81,797

Other
24,261

 
26,672

 
24,751

Total cost of revenue
266,247

 
241,896

 
257,847

Gross margin:
 
 
 
 
 
Home Robots
210,842

 
182,049

 
127,252

Defense & Security Robots
25,028

 
30,480

 
93,322

Other
(14,716
)
 
(18,181
)
 
(12,921
)
Total gross margin
221,154

 
194,348

 
207,653

Research and development
63,649

 
57,066

 
60,100

Selling and marketing
71,529

 
66,412

 
50,477

General and administrative
53,358

 
45,698

 
43,753

Other income (expense), net
(203
)
 
435

 
218

Income before income taxes
$
32,415

 
$
25,607

 
$
53,541

As of December 28, 2013, goodwill of $41.0 million and purchased intangible assets, net of $22.6 million recorded in conjunction with the acquisition of Evolution Robotics, Inc. in October 2012 are directly associated with the home robots business unit. Goodwill of $7.7 million and purchased intangible assets, net of $0.03 million recorded in conjunction with the acquisition of Nekton in September 2008 are directly associated with the defense and security business unit. Other long lived assets are not directly attributable to individual business segments.
 
Geographic Information
For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, sales to non-U.S. customers accounted for 59.5%, 57.3% and 45.5% of total revenue, respectively.
Significant Customers
For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011, U.S. federal government orders, contracts and subcontracts accounted for 6.2%, 15.1% and 36.1% of total revenue, respectively. For the fiscal years ended December 28, 2013, December 29, 2012 and December 31, 2011 approximately 75.3%, 75.4% and 74.0%, respectively, of our home robot product revenue resulted from sales to 15 customers. For the fiscal years ended December 28, 2013 and December 29, 2012, the Company generated an aggregate of 33.2% and 30.6%, respectively, of its total revenue from its home robots distributor in Japan (Sales on Demand Corporation) and a network of affiliated European distributors of the Company's home robots.
 

65

iROBOT CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)


17.
Quarterly Information (Unaudited)
 
Fiscal Quarter Ended
 
March 31,
2012
 
June 30,
2012
 
September 29,
2012
 
December 29,
2012
 
March 30,
2013
 
June 29,
2013
 
September 28,
2013
 
December 28,
2013
 
(In thousands, except per share amounts)
Revenue
$
97,807

 
$
111,445

 
$
126,298

 
$
100,694

 
$
106,195

 
$
130,362

 
$
124,501

 
$
126,343

Gross margin
38,552

 
52,816

 
58,476

 
44,504

 
46,558

 
61,605

 
54,061

 
58,930

Net income (loss)
653

 
7,375

 
15,207

 
(5,938
)
 
8,355

 
8,294

 
7,804

 
3,188

Diluted earnings (loss) per share
$
0.02

 
$
0.26

 
$
0.54

 
$
(0.21
)
 
$
0.29

 
$
0.28

 
$
0.26

 
$
0.11



ITEM 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

Not Applicable.
 

ITEM 9A.    CONTROLS AND PROCEDURES
Evaluation of disclosure controls and procedures.
As required by Rule 13a-15(b) under the Exchange Act, we have carried out an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer (“CEO”) and our Chief Financial Officer (“CFO”), of the effectiveness, as of the end of the period covered by this report, of the design and operation of our “disclosure controls and procedures” as defined in Rule 13a-15(e) promulgated by the SEC under the Exchange Act. Based upon that evaluation, our CEO and our CFO concluded that our disclosure controls and procedures, as of the end of such period, were adequate and effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information was accumulated and communicated to management, as appropriate, to allow timely decisions regarding required disclosure.
Management’s Report on Internal Control Over Financial Reporting
The management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rules 13a-15(f) and 15d-15(f) promulgated under the Exchange Act as a process designed by, or under the supervision of, the Company’s principal executive and principal financial officers and effected by the Company’s board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:
Pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the Company;
Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and
Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Under the supervision and with the participation of management, including our principal executive and financial officers, we assessed the Company’s internal control over financial reporting as of December 28, 2013, based on criteria for effective internal control over financial reporting established in Internal Control — Integrated Framework (1992), issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this assessment, management

66


concluded that the Company maintained effective internal control over financial reporting as of December 28, 2013 based on the specified criteria.
The effectiveness of the Company’s internal control over financial reporting as of December 28, 2013 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which is included herein.

Changes in Internal Control Over Financial Reporting
During the quarter ended December 28, 2013, there were no changes in our internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

67


ITEM 9B.    OTHER INFORMATION
Our policy governing transactions in our securities by our directors, officers, and employees permits our officers, directors, funds affiliated with our directors, and certain other persons to enter into trading plans complying with Rule 10b5-l under the Securities Exchange Act of 1934, as amended. We have been advised that certain of our officers and directors (including Colin Angle, Chief Executive Officer, Glen Weinstein, Executive Vice President and Chief Legal Officer, and Alison Dean, Executive Vice President and Chief Financial Officer) of the Company have entered into trading plans (each a “Plan” and collectively, the “Plans”) covering periods after the date of this Annual Report on Form 10-K in accordance with Rule 10b5-l and our policy governing transactions in our securities. Generally, under these trading plans, the individual relinquishes control over the transactions once the trading plan is put into place. Accordingly, sales under these plans may occur at any time, including possibly before, simultaneously with, or immediately after significant events involving our company.
We anticipate that, as permitted by Rule 10b5-l and our policy governing transactions in our securities, some or all of our officers, directors and employees may establish trading plans in the future. We intend to disclose the names of our executive officers and directors who establish a trading plan in compliance with Rule 10b5-l and the requirements of our policy governing transactions in our securities in our future quarterly and annual reports on Form 10-Q and 10-K filed with the Securities and Exchange Commission. We, however, undertake no obligation to update or revise the information provided herein, including for revision or termination of an established trading plan, other than in such quarterly and annual reports.
PART  III
ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 28, 2013.
ITEM 11.    EXECUTIVE COMPENSATION
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 28, 2013. 

ITEM 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 28, 2013.

ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 28, 2013.

ITEM 14.    PRINCIPAL ACCOUNTING FEES AND SERVICES
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 28, 2013.
PART IV
 
ITEM 15.    EXHIBITS, FINANCIAL STATEMENT SCHEDULES

(a)The following are filed as part of this Annual Report on Form 10-K:
1.
Financial Statements
The following consolidated financial statements are included in Item 8:
Report of Independent Registered Public Accounting Firm

68


Consolidated Balance Sheets at December 28, 2013 and December 29, 2012
Consolidated Statements of Income for the Years ended December 28, 2013, December 29, 2012 and December 31, 2011
Consolidated Statements of Comprehensive Income for the Years ended December 28, 2013, December 29, 2012 and December 31, 2011
Consolidated Statements of Stockholders’ Equity for the Years ended December 28, 2013, December 29, 2012 and December 31, 2011
Consolidated Statements of Cash Flows for the Years ended December 28, 2013, December 29, 2012 and December 31, 2011
Notes to Consolidated Financial Statements
2.
Financial Statement Schedules
 
All other schedules have been omitted since the required information is not present, or not present in amounts sufficient to require submission of the schedule, or because the information required is included in the consolidated financial statements or the Notes thereto.
3.
Exhibits — See item 15(b) of this report below

(b)
Exhibits
The following exhibits are filed as part of and incorporated by reference into this Annual Report:
 


69


Exhibit
Number
 
Description
2.1
 
Agreement and Plan of Merger, dated as of September 14, 2012, by and among the Registrant, Bull Dog Acquisition Corporation, Evolution Robotics, Inc. and the Securityholders' Representative named therein (filed as Exhibit 2.1 to the Registrant's Current Report on Form 8-K filed on September 17, 2012 and incorporated by reference herein)
3.1(1)
 
Form of Second Amended and Restated Certificate of Incorporation of the Registrant dated November 15, 2005
3.2(1)
 
Amended and Restated By-laws of the Registrant
4.1(1)
 
Specimen Stock Certificate for shares of the Registrant’s Common Stock
4.2(1)
 
Shareholder Rights Agreement between the Registrant and Computershare Trust Company, Inc., as the Rights Agent dated November 15, 2005
10.1(1)
 
Fifth Amended and Restated Registration Rights Agreement by and among the Registrant, the Investors and the Stockholders named therein, dated as of November 10, 2004
10.2†(1)
 
Form of Indemnification Agreement between the Registrant and its Directors and Executive Officers
10.3†(1)
 
Amended and Restated 1994 Stock Plan and forms of agreements thereunder
10.4†
 
Amended and Restated 2004 Stock Option and Incentive Plan and forms of agreements thereunder (filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
10.5†
 
Form of Executive Agreement between the Registrant and certain executive officers of the Registrant, as amended (filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended October 2, 2010 and incorporated by reference herein)
10.6†(1)
 
Employment Agreement between the Registrant and Colin Angle, dated as of January 1, 1997
10.7†
 
2005 Stock Option and Incentive Plan, as amended, and forms of agreements thereunder (filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on June 2, 2009 and incorporated by reference herein)
10.8#(1)
 
Manufacturing and Services Agreement between the Registrant and Gem City Engineering Corporation, dated as of July 27, 2004
10.9†
 
Non-Employee Directors’ Deferred Compensation Program, as amended (filed as Exhibit 10.19 to the Registrant’s Annual Report on Form 10-K for the year ended December 29, 2007 and incorporated by reference herein)
10.10
 
Lease Agreement between the Registrant and Boston Properties Limited Partnership for premises located at 4-18 Crosby Drive, Bedford, Massachusetts, dated as of February 22, 2007 (filed as Exhibit 10.22 to the Registrant’s Annual Report on Form 10-K for the year ended December 30, 2006 and incorporated by reference herein)

70


Exhibit
Number
 
Description
10.11†
 
Senior Executive Incentive Compensation Plan (filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended July 2, 2011 and incorporated by reference herein)
10.12†
 
Form of Deferred Stock Award Agreement under the 2005 Stock Option and Incentive Plan (filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 28, 2008 and incorporated by reference herein)
10.13†
 
Form of Restricted Stock Award Agreement under the 2005 Stock Option and Incentive Plan (filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 28, 2008 and incorporated by reference herein)
10.14#
 
Manufacturing Services Agreement between the Registrant and Jabil Circuit, Inc., dated as of March 18, 2010 (filed as Exhibit 10.1 to Amendment No. 1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended April 3, 2010 and incorporated by reference herein)
10.15*
 
Amended and Restated Credit Agreement between the Registrant and Bank of America N.A. dated December 20, 2013
10.16*
 
Amended and Restated Reimbursement Agreement between the Registrant and Bank of America N.A. dated December 20, 2013
21.1*
 
Subsidiaries of the Registrant
23.1*
 
Consent of PricewaterhouseCoopers LLP
24.1
 
Power of Attorney (incorporated by reference to the signature page of this report on Form 10-K)
31.1*
 
Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934
31.2*
 
Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934
32.1*
 
Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101*
 
The following materials from the Registrant’s Annual Report on Form 10-K for the year ended December 28, 2013 formatted in XBRL (eXtensible Business Reporting Language): (i) the Consolidated Balance Sheets, (ii) the Consolidated Statements of Income, (iii) the Consolidated Statements of Comprehensive Income, (iv) the Consolidated Statements of Stockholders' Equity, (v) the Consolidated Statements of Cash Flows, and (vi) related notes to these financial statements
Indicates a management contract or any compensatory plan, contract or arrangement.
#
Confidential treatment requested for portions of this document.
(1)
Incorporated by reference herein to the exhibits to the Company’s Registration Statement on Form S-1 (File No. 333-126907)
*
Filed herewith


71


SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the Registrant has duly caused this Annual Report on Form 10-K to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
iROBOT CORPORATION
 
 
 
 
 
By:
 
/s/    Colin M. Angle
 
 
 
Colin M. Angle
Chairman of the Board,
Chief Executive Officer and Director
Date: February 18, 2014
POWER OF ATTORNEY
KNOW ALL MEN BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Colin M. Angle and Alison Dean, jointly and severally, his or her attorney-in-fact, with the power of substitution, for him or her in any and all capacities, to sign any amendments to this Annual Report on Form 10-K and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his or her substitute or substitutes, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Annual Report on Form 10-K has been signed by the following persons in the capacities indicated on February 18, 2014.
 
Signature
Title(s)
/s/    COLIN M. ANGLE
Chairman of the Board, Chief Executive Officer and Director
(Principal Executive Officer)
Colin M. Angle
 
 
/s/    ALISON DEAN
Executive Vice President, Chief Financial Officer and
Treasurer (Principal Financial and Accounting Officer)
Alison Dean
 
 
/s/    RONALD CHWANG
Director
Ronald Chwang
 
 
 
/s/    JACQUES S. GANSLER
Director
Jacques S. Gansler
 
 
 
/s/    GAIL DEEGAN
Director
Gail Deegan
 
 
 
/s/    ANDREA GEISSER
Director
Andrea Geisser
 

72


 
 
/s/    GEORGE C. MCNAMEE
Director
George C. McNamee
 
 
 
/s/    DEBORAH G. ELLINGER
Director
Deborah G. Ellinger
 
 
 
/s/    PAUL J. KERN
Director
Paul J. Kern
 
 
 
/s/    PAUL SAGAN
Director
Paul Sagan
 


73


EXHIBIT INDEX
 
Exhibit
Number
 
Description
2.1
 
Agreement and Plan of Merger, dated as of September 14, 2012, by and among the Registrant, Bull Dog Acquisition Corporation, Evolution Robotics, Inc. and the Securityholders' Representative named therein (filed as Exhibit 2.1 to the Registrant's Current Report on Form 8-K filed on September 17, 2012 and incorporated by reference herein)
3.1(1)
 
Form of Second Amended and Restated Certificate of Incorporation of the Registrant dated November 15, 2005
3.2(1)
 
Amended and Restated By-laws of the Registrant
4.1(1)
 
Specimen Stock Certificate for shares of the Registrant’s Common Stock
4.2(1)
 
Shareholder Rights Agreement between the Registrant and Computershare Trust Company, Inc., as the Rights Agent dated November 15, 2005
10.1(1)
 
Fifth Amended and Restated Registration Rights Agreement by and among the Registrant, the Investors and the Stockholders named therein, dated as of November 10, 2004
10.2†(1)
 
Form of Indemnification Agreement between the Registrant and its Directors and Executive Officers
10.3†(1)
 
Amended and Restated 1994 Stock Plan and forms of agreements thereunder
10.4†
 
Amended and Restated 2004 Stock Option and Incentive Plan and forms of agreements thereunder (filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
10.5†
 
Form of Executive Agreement between the Registrant and certain executive officers of the Registrant, as amended (filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended October 2, 2010 and incorporated by reference herein)
10.6†(1)
 
Employment Agreement between the Registrant and Colin Angle, dated as of January 1, 1997
10.7†
 
2005 Stock Option and Incentive Plan, as amended, and forms of agreements thereunder (filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on June 2, 2009 and incorporated by reference herein)
10.8#(1)
 
Manufacturing and Services Agreement between the Registrant and Gem City Engineering Corporation, dated as of July 27, 2004
10.9†
 
Non-Employee Directors’ Deferred Compensation Program, as amended (filed as Exhibit 10.19 to the Registrant’s Annual Report on Form 10-K for the year ended December 29, 2007 and incorporated by reference herein)
10.10
 
Lease Agreement between the Registrant and Boston Properties Limited Partnership for premises located at 4-18 Crosby Drive, Bedford, Massachusetts, dated as of February 22, 2007 (filed as Exhibit 10.22 to the Registrant’s Annual Report on Form 10-K for the year ended December 30, 2006 and incorporated by reference herein)
10.11†
 
Senior Executive Incentive Compensation Plan (filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended July 2, 2011 and incorporated by reference herein)
10.12†
 
Form of Deferred Stock Award Agreement under the 2005 Stock Option and Incentive Plan (filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 28, 2008 and incorporated by reference herein)
10.13†
 
Form of Restricted Stock Award Agreement under the 2005 Stock Option and Incentive Plan (filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 28, 2008 and incorporated by reference herein)
10.14#
 
Manufacturing Services Agreement between the Registrant and Jabil Circuit, Inc., dated as of March 18, 2010 (filed as Exhibit 10.1 to Amendment No. 1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended April 3, 2010 and incorporated by reference herein)
10.15*
 
Amended and Restated Credit Agreement between the Registrant and Bank of America N.A. dated December 20, 2013
10.16*
 
Amended and Restated Reimbursement Agreement between the Registrant and Bank of America N.A. dated December 20, 2013
21.1*
 
Subsidiaries of the Registrant
23.1*
 
Consent of PricewaterhouseCoopers LLP
24.1
 
Power of Attorney (incorporated by reference to the signature page of this report on Form 10-K)
31.1*
 
Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934
31.2*
 
Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934

74


32.1*
 
Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101*
 
The following materials from the Registrant’s Annual Report on Form 10-K for the year ended December 28, 2013 formatted in XBRL (eXtensible Business Reporting Language): (i) the Consolidated Balance Sheets, (ii) the Consolidated Statements of Income, (iii) the Consolidated Statements of Comprehensive Income, (iv) the Consolidated Statements of Stockholders' Equity, (v) the Consolidated Statements of Cash Flows, and (vi) related notes to these financial statements
Indicates a management contract or any compensatory plan, contract or arrangement.
#
Confidential treatment requested for portions of this document.
(1)
Incorporated by reference herein to the exhibits to the Company’s Registration Statement on Form S-1 (File No. 333-126907)
*
Filed herewith


75