10-K 1 txn-12312013x10xk.htm 10-K TXN - 12.31.2013 - 10-K

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C.  20549
FORM 10-K
(mark one)
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2013
OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
for the transition period from                         to                            
Commission File Number 1-3761
TEXAS INSTRUMENTS INCORPORATED
(Exact name of Registrant as specified in its charter)

Delaware
 
75-0289970
(State of Incorporation)
 
(I.R.S.  Employer Identification No.)
 
 
 
12500 TI Boulevard, P.O. Box 660199, Dallas, Texas
 
75266-0199
(Address of Principal Executive Offices)
 
(Zip Code)

Registrant’s Telephone Number, Including Area Code: 214-479-3773
Securities registered pursuant to Section 12(b) of the Act:

Title of each class
 
Name of each exchange on which registered
Common Stock, par value $1.00
 
The NASDAQ Global Select Market


Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes x  No ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes ¨  No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x No ¨
Insert by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yes x No ¨

 



Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer,  a non-accelerated filer, or a smaller reporting company.  See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.  (Check one):

Large accelerated filer x
 
Accelerated filer ¨
 
 
 
Non-accelerated filer ¨
 
Smaller reporting company ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes ¨  No x

The aggregate market value of voting stock held by non-affiliates of the Registrant was approximately $37,754,545,231 as of June 28, 2013.

1,084,213,991 (Number of shares of common stock outstanding as of January 31, 2014)

Parts I, II and IV hereof incorporate information by reference to the Registrant’s 2013 annual report to stockholders. Part III hereof incorporates information by reference to the Registrant’s proxy statement for the 2014 annual meeting of stockholders.

 



PART I

ITEM 1. Business.
Company Overview
At Texas Instruments (TI), we design and make semiconductors that we sell to electronics designers and manufacturers all over the world. We began operations in 1930. We are incorporated in Delaware, headquartered in Dallas, Texas, and have design, manufacturing or sales operations in 35 countries. We have three segments: Analog, Embedded Processing and Other. We expect Analog and Embedded Processing to be our primary growth engines in the years ahead, and we therefore focus our resources on these segments.
Financial information with respect to our segments and our operations outside the United States is contained in Note 16 to the financial statements captioned “Segment and geographic area data” in TI’s 2013 annual report to stockholders and is incorporated herein by reference to such report. Risks attendant to our foreign operations are described in Item 1A, “Risk Factors.”
Product Information
Semiconductors are electronic components that serve as the building blocks inside modern electronic systems and equipment. Semiconductors come in two basic forms: individual transistors and integrated circuits (generally known as “chips”) that combine multiple transistors on a single piece of material to form a complete electronic circuit. Our products, more than 100,000 orderable parts, are integrated circuits that are used to accomplish many different things, such as converting and amplifying signals, interfacing with other devices, managing and distributing power, processing data, canceling noise and improving signal resolution. This broad portfolio includes products that are integral to almost all electronic equipment.
We sell catalog and application-specific standard semiconductor products, both of which we market to multiple customers. Catalog products are designed for use by many customers and/or many applications and are sold through both distribution and direct channels. The vast majority of our catalog products are differentiated. We also sell catalog commodity products, but they account for a small percentage of our revenue. The life cycles of catalog products generally span multiple years, with some products continuing to sell for decades after their initial release. Application-specific standard products (ASSPs) are designed for use by a smaller number of customers and are targeted to a specific application. The life cycles of ASSPs are generally determined by end-equipment upgrade cycles and can be as short as 12 to 24 months, although some can be used across multiple generations of customers’ products.
Our segments represent groups of similar products that are combined on the basis of similar design and development requirements, product characteristics, manufacturing processes and distribution channels, and how management allocates resources and measures results. Additional information regarding each segment’s products follows.
Analog
Analog semiconductors change real-world signals - such as sound, temperature, pressure or images - by conditioning them, amplifying them and often converting them to a stream of digital data that can be processed by other semiconductors, such as embedded processors. Analog semiconductors are also used to manage power in every electronic device, whether plugged into a wall or running off a battery. We estimate that we sell our Analog products to more than 100,000 customers. Our Analog products are used in many markets, particularly personal electronics and industrial.
Sales of our Analog products generated about 60 percent of our revenue in 2013. According to external sources, the worldwide market for analog semiconductors was about $40 billion in 2013. Our Analog segment’s revenue in 2013 was $7.2 billion, or about 18 percent of this fragmented market, the leading position. We believe that we are well positioned to increase our market share over time.
Our Analog segment includes the following major product lines: High Volume Analog & Logic (HVAL), Power Management (Power), High Performance Analog (HPA) and Silicon Valley Analog (SVA).

HVAL products: These include high-volume integrated analog products for specific applications and high-volume catalog products. HVAL products support applications like automotive safety devices, touch screen controllers, low voltage motor drivers and integrated motor controllers.

3


Power products: These include both catalog products and ASSPs that help customers manage power in electronic systems. Our broad portfolio of Power products is designed to enhance the efficiency of powered devices using battery management solutions, portable power conversion devices, power supply controls and point-of-load products.
HPA products: These include catalog analog products that we market to many different customers who use them in manufacturing a wide range of products. HPA products include high-speed data converters, amplifiers, sensors, high reliability products, interface products and precision analog products that are typically used in systems that require high performance. HPA products generally have long life cycles, often more than 10 years.
SVA products: These include a broad portfolio of power management, data converter, interface and operational amplifier catalog analog products used in manufacturing a wide range of products. SVA products support applications like video and data interface products, electrical fault/arc detection systems and mobile lighting and display systems. SVA products generally have long life cycles, often more than 10 years. SVA consists primarily of products that we acquired through our purchase of National Semiconductor Corporation in 2011.
Embedded Processing
Embedded Processing products are the “brains” of many electronic devices. Embedded processors are designed to handle specific tasks and can be optimized for various combinations of performance, power and cost, depending on the application. The devices vary from simple, low-cost products used in electric toothbrushes to highly specialized, complex devices used in wireless basestation communications infrastructure equipment. Our Embedded Processing products are used in many markets, particularly industrial and automotive.
An important characteristic of our Embedded Processing products is that our customers often invest their own research and development (R&D) to write software that operates on our products. This investment tends to increase the length of our customer relationships because many customers prefer to re-use software from one product generation to the next.
Sales of Embedded Processing products generated about 20 percent of our revenue in 2013. According to external sources, the worldwide market for embedded processors was about $17 billion in 2013. Our Embedded Processing segment’s revenue in 2013 was $2.4 billion. This was the number two position and represented about 14 percent of this fragmented market. We believe we are well positioned to increase our market share over time.
Our Embedded Processing segment includes the following major product lines: Processors, Microcontrollers and Connectivity.
Processor products: These include digital signal processors (DSPs) and applications processors. DSPs perform mathematical computations almost instantaneously to process or improve digital data. Applications processors run an industry-standard operating system and perform multiple complex tasks, often communicating with other systems.
Microcontroller products: Microcontrollers are self-contained systems with a processor core, memory and peripherals that are designed to control a set of specific tasks for electronic equipment. Microcontrollers tend to have minimal requirements for memory and program length, with no operating system and low software complexity. Analog components that control or interface with sensors and other systems are often integrated into microcontrollers.
Connectivity products: Connectivity products enable electronic devices to seamlessly connect and transfer data, and the requirements for speed, data capability, distance and power vary depending on the application. Our Connectivity products support many wireless technologies to meet these requirements, including low-power wireless network standards like Zigbee® and other technologies like Bluetooth®, WiFi and GPS. Our Connectivity products are usually designed into customer devices alongside our processor and microcontroller products, enabling data to be collected, transmitted and acted upon.

4


Other
Other includes revenue from our smaller product lines, such as DLP® (primarily used in projectors to create high-definition images), certain custom semiconductors known as application-specific integrated circuits (ASICs) and calculators. It includes royalties received for our patented technology that we license to other electronics companies and revenue from transitional supply agreements related to acquisitions and divestitures. We also include revenue from our baseband products and from our OMAPTM applications processors and connectivity products sold into smartphones and consumer tablets, all of which are product lines that we previously announced we are exiting and are collectively referred to as “legacy wireless products.” Revenue from legacy wireless products declined throughout the year, and our exit from these products is complete. Other generated $2.6 billion of revenue in 2013.
We also include in Other restructuring charges and certain acquisition-related charges, as these charges are not used in evaluating the results of or in allocating resources to our segments. Acquisition-related charges include certain fair-value adjustments, restructuring charges, transaction expenses, acquisition-related retention bonuses and amortization of intangible assets. Other also includes certain corporate-level items, such as litigation expenses, environmental costs, insurance proceeds, and assets and liabilities associated with our centralized operations, such as our worldwide manufacturing, facilities and procurement operations.
Markets for Our Products
The table below lists the major markets that used our products in 2013 and the approximate percentage of our 2013 product revenue that the market represented. The chart also lists the sectors within those markets into which our products were most frequently sold.
    Market
   Sectors
Industrial
(24% of product revenue)
Appliances
Building automation
Display
Electronic point of sale
Factory automation and control
Industrial transportation
Lighting
Medical/healthcare/fitness
Motor drives
Smart grid
Space/avionics/defense
Test and measurement
Other (education, toys, musical instruments, etc.)
Automotive
(13% of product revenue)
Advanced driver assistance systems (ADAS)
Body
Hybrid/electric vehicle and powertrain
Infotainment and cluster
Passive safety
Personal electronics
(37% of product revenue)
Gaming
Mobile phones
Personal and notebook computers
Printers and other peripherals
Storage
Tablets
TV/set-top box/audio
Wearables (non-medical)
Communications equipment
(16% of product revenue)
Enterprise switching
Residential gateway
Telecom infrastructure
Wireless infrastructure
Enterprise systems
(6% of product revenue)
High-performance computing
Projectors
Servers
Thin client
Calculators
(4% of product revenue)
   Graphing and educational calculators

5


Market Characteristics
Product cycle
The global semiconductor market is characterized by constant, though generally incremental, advances in product designs and manufacturing processes. Semiconductor prices and manufacturing costs tend to decline over time as manufacturing processes and product life cycles mature.
Market cycle
The “semiconductor cycle” is an important concept that refers to the ebb and flow of supply and demand. The semiconductor market historically has been characterized by periods of tight supply caused by strengthening demand and/or insufficient manufacturing capacity, followed by periods of surplus inventory caused by weakening demand and/or excess manufacturing capacity. These are typically referred to as upturns and downturns in the semiconductor cycle. The semiconductor cycle is affected by the significant time and money required to build and maintain semiconductor manufacturing facilities.
Seasonality
Our revenue is subject to some seasonal variation. Our semiconductor revenue tends to be weaker in the first and fourth quarters when compared to the second and third quarters. Calculator revenue is tied to the U.S. back-to-school season and is therefore at its highest in the second and third quarters.
Competitive landscape
The analog and embedded processing markets are highly fragmented. As a result, we face significant global competition from dozens of large and small companies in each of those markets, including both broad-based suppliers and niche suppliers. Our competitors also include emerging companies, particularly in Asia, that sell products into the same markets in which we operate.
We believe that competitive performance in the semiconductor market generally depends on several factors, including the breadth of a company’s product line, the strength and depth of the sales network, technological innovation, product development execution, technical support, customer service, quality, reliability, price and scale. The primary competitive factors for our Analog products include design proficiency, a diverse product portfolio to meet wide-ranging customer needs, manufacturing process technologies that provide differentiated levels of performance, applications and sales support, and manufacturing expertise and capacity. The primary competitive factors for our Embedded Processing products are the ability to design and cost-effectively manufacture products, system-level knowledge about targeted end markets, installed base of software, software expertise, applications and sales support, and a product’s performance, integration and power characteristics.
Manufacturing
Semiconductor manufacturing begins with a sequence of photo-lithographic and chemical processing steps that fabricate a number of semiconductor devices on a thin silicon wafer. Each device on the wafer is tested, the wafer is cut into individual units and each unit is assembled into a package that then is usually retested. The entire process takes place in highly specialized facilities and requires an average of 12 weeks, with most products completing within 8 to 16 weeks.
The cost and lifespan of the equipment and processes we use to manufacture semiconductors vary by technology. Our Analog products and most of our Embedded Processing products can be manufactured using mature and stable, and therefore less expensive, equipment than is needed for manufacturing advanced logic products, such as some of our processor products.
We own and operate semiconductor manufacturing facilities in North America, Asia, Japan and Europe. These include both wafer fabrication and assembly/test facilities. Our facilities require substantial investment to construct and are largely fixed-cost assets once in operation. Because we own much of our manufacturing capacity, a significant portion of our operating cost is fixed. In general, these fixed costs do not decline with reductions in customer demand or utilization of capacity, potentially lowering our profit margins. Conversely, as product demand rises and factory utilization increases, the fixed costs are spread over increased output, potentially benefiting our profit margins.

6


We expect to maintain sufficient internal manufacturing capacity to meet the vast majority of our production needs. To supplement our manufacturing capacity and maximize our responsiveness to customer demand and return on capital, we utilize the capacity of outside suppliers, commonly known as foundries, and subcontractors. In 2013, we sourced about 20 percent of our total wafers from external foundries and about 35 percent of our assembly/test services from subcontractors.
In 2013, we closed older wafer fabrication facilities in Hiji, Japan, and Houston, Texas. In December 2013, we acquired an assembly/test facility in the Hi-Tech Zone of Chengdu, China, adjacent to our existing fabrication facility in Chengdu.

Inventory

Our inventory practices differ by product, but we generally maintain inventory levels that are consistent with our expectations of customer demand. Because of the longer product life cycles of catalog products and their inherently lower risk of obsolescence, we generally carry more inventory of those products than application-specific products. Additionally, we sometimes maintain product inventory in unfinished wafer form, as well as higher finished-goods inventory of low-volume catalog products, allowing greater flexibility in periods of high demand. We also have consignment inventory programs in place for our largest customers and some distributors.
Design Centers
Our design centers provide design, engineering and product application support as well as after-sales customer service. The design centers are strategically located around the world to take advantage of key technical and engineering talent and proximity to key customers.
Customers
Our products are sold to original equipment manufacturers (OEMs), original design manufacturers (ODMs) and companies within the electronics manufacturing services industry (EMSI). An OEM designs and sells products under its own brand that it manufactures in-house or has manufactured by others. An ODM designs and manufactures products for other companies, which then sell those products under their own brand. EMSI companies manufacture, distribute and provide repair services for electronic products for OEMs. In addition, we sell to customers through distributors. In 2013, no single customer accounted for 10 percent or more of our revenue.
Sales and Distribution
We market and sell our semiconductor products through a direct sales force and distributors. We have sales or marketing offices in 34 countries worldwide and have expanded our sales networks in the emerging markets of China, India and Eastern Europe over the last few years. Distributors located around the world account for about 55 percent of our revenue. Our distributors maintain an inventory of our products and sell directly to a wide range of customers. They also sell products from our competitors. Our distribution network holds a mix of distributor-owned and TI-consigned inventory. Over time, we expect this mix will continue to shift more toward consignment. We sell our calculator products primarily through retailers and instructional dealers.
Acquisitions, Divestitures and Investments
From time to time we consider acquisitions and divestitures that may strengthen or better focus our business portfolio. We also make investments directly or indirectly in private companies. Investments are focused primarily on next-generation technologies and markets strategic to us. In September 2011, we acquired National Semiconductor Corporation.

Backlog
We define backlog as of a particular date as firm purchase orders with a customer-requested delivery date within a specified length of time. As customer requirements and industry conditions change, orders may be, under certain circumstances, subject to cancellation or modification of terms such as pricing, quantity or delivery date. Customer order placement practices continually evolve based on customers’ individual business needs and capabilities, as well as industry supply and capacity considerations. Accordingly, our backlog at any particular date may not be indicative of revenue for any future period. Our backlog of orders was $1.06 billion at December 31, 2013, and $1.17 billion at December 31, 2012.

7


Raw Materials
We purchase materials, parts and supplies from a number of suppliers. In some cases we purchase such items from sole source suppliers. The materials, parts and supplies essential to our business are generally available at present, and we believe that such materials, parts and supplies will be available in the foreseeable future.
Intellectual Property
We own many patents, and have many patent applications pending, in the United States and other countries in fields relating to our business. We have developed a strong, broad-based patent portfolio and continually add patents to that portfolio. We also have agreements with numerous companies involving license rights and anticipate that other license agreements may be negotiated in the future. In general, our license agreements have multi-year terms and may be renewed after renegotiation.
Our semiconductor patent portfolio is an ongoing contributor to our revenue. We do not consider our business materially dependent upon any one patent or patent license, although taken as a whole, our rights and the products made and sold under patents and patent licenses are important to our business.
We often participate in industry initiatives to set technical standards. Our competitors may participate in the same initiatives. Participation in these initiatives may require us to license certain of our patents to other companies on reasonable and non-discriminatory terms.
We own trademarks that are used in the conduct of our business. These trademarks are valuable assets, the most important of which are “Texas Instruments” and our corporate monogram. Other valuable trademarks include DLP® and OMAPTM.
Research and Development
Our R&D expense was $1.52 billion in 2013, compared with $1.88 billion in 2012 and $1.72 billion in 2011. Our primary areas of R&D investment are Analog and Embedded Processing products.
We conduct most of our R&D internally. However, we also closely engage with a wide range of third parties, including software suppliers, universities and select external industry consortia, and we collaborate with our foundry suppliers on semiconductor manufacturing technology.
From time to time we may terminate R&D projects before completion or decide not to manufacture and sell a developed product. We do not expect that all of our R&D projects will result in products that are ultimately released for sale, or that our projects will contribute significant revenue until at least a few years following completion.

8


Executive Officers of the Registrant
The following is an alphabetical list of the names and ages of the executive officers of the company and the positions or offices with the company presently held by each person named:
Name
Age
Position
Niels Anderskouv
44
Senior Vice President
Stephen A. Anderson
52
Senior Vice President
Brian T. Crutcher
41
Senior Vice President
R. Gregory Delagi
51
Senior Vice President
David K. Heacock
53
Senior Vice President
Joseph F. Hubach
56
Senior Vice President, Secretary and General Counsel
Sami Kiriaki
53
Senior Vice President
Kevin P. March
56
Senior Vice President and Chief Financial Officer
Robert K. Novak
48
Senior Vice President
Kevin J. Ritchie
57
Senior Vice President
John J. Szczsponik, Jr.
53
Senior Vice President
Richard K. Templeton
55
Director; Chairman of the Board; President and Chief Executive Officer
Teresa L. West
53
Senior Vice President
Darla H. Whitaker
48
Senior Vice President
The term of office of the above-listed officers is from the date of their election until their successor shall have been elected and qualified. All executive officers of the company have been employees of the company for more than five years. Mses. West and Whitaker and Messrs. Anderson, Delagi, Heacock, Hubach, March, Novak, Ritchie and Templeton have served as executive officers of the company for more than five years. Mr. Szczsponik became an executive officer of the company in 2009. Messrs. Crutcher and Kiriaki became executive officers of the company in 2010. Mr. Anderskouv became an executive officer of the company in 2012.
Employees
At December 31, 2013, we had 32,209 employees.
Available Information
Our Internet address is www.ti.com. Information on our web site is not a part of this report. We make available, free of charge, through our investor relations web site our reports on Forms 10-K, 10-Q and 8-K, and amendments to those reports, as soon as reasonably practicable after they are filed with the SEC. Also available through the TI investor relations web site are reports filed by our directors and executive officers on Forms 3, 4 and 5, and amendments to those reports.
Available on our web site at www.ti.com/corporategovernance are: (i) our Corporate Governance Guidelines; (ii) charters for the Audit, Compensation, and Governance and Stockholder Relations Committees of our board of directors; (iii) our Code of Business Conduct; and (iv) our Code of Ethics for TI Chief Executive Officer and Senior Finance Officers. Stockholders may request copies of these documents free of charge by writing to Texas Instruments Incorporated, P.O. Box 660199, MS 8657, Dallas, Texas, 75266-0199, Attention: Investor Relations.
ITEM 1A. Risk Factors.
You should read the following Risk Factors in conjunction with the factors discussed elsewhere in this and other of our filings with the Securities and Exchange Commission (SEC) and in materials incorporated by reference in these filings. These Risk Factors are intended to highlight certain factors that may affect our financial condition and results of operations and are not meant to be an exhaustive discussion of risks that apply to companies like TI with broad international operations. Like other companies, we are susceptible to macroeconomic downturns in the United States or abroad that may affect the general economic climate and our performance and the performance of our customers. Similarly, the price of our securities is subject to volatility due to fluctuations in general market conditions, actual financial results that do not meet our and/or the investment

9


community’s expectations, changes in our and/or the investment community’s expectations for our future results and other factors, many of which are beyond our control.
Cyclicality in the Semiconductor Market May Affect Our Performance.
Semiconductor products are the principal source of our revenue. The semiconductor market historically has been cyclical and subject to significant and often rapid increases and decreases in product demand. These changes could have adverse effects on our results of operations, and on the market price of our securities. The results of our operations may be adversely affected in the future if demand for our semiconductors decreases or if this market or key end-equipment markets grow at a significantly slower pace than management expects.
Our Margins May Vary over Time.
Our profit margins may be adversely affected in the future by a number of factors, including decreases in our shipment volume, reductions in, or obsolescence of our inventory and shifts in our product mix. In addition, the highly competitive market environment in which we operate might adversely affect pricing for our products. Because we own much of our manufacturing capacity, a significant portion of our operating costs is fixed. In general, these fixed costs do not decline with reductions in customer demand or utilization of manufacturing capacity, and can adversely affect profit margins as a result.
The Technology Industry Is Characterized by Rapid Technological Change That Requires Us to Develop New Technologies and Products.
Our results of operations depend in part upon our ability to successfully develop, manufacture and market innovative products in a rapidly changing technological environment. We require significant capital to develop new technologies and products to meet changing customer demands that, in turn, may result in shortened product life cycles. Moreover, expenditures for technology and product development are generally made before the commercial viability for such developments can be assured. As a result, there can be no assurance that we will successfully develop and market these new products. There also is no assurance that the products we do develop and market will be well-received by customers, nor that we will realize a return on the capital expended to develop such products.
We Face Substantial Competition That Requires Us to Respond Rapidly to Product Development and Pricing Pressures.
We face intense technological and pricing competition in the markets in which we operate. We expect this competition will continue to increase from large competitors and from smaller competitors serving niche markets, and also from emerging companies, particularly in Asia, that sell products into the same markets in which we operate. Certain of our competitors possess sufficient financial, technical and management resources to develop and market products that may compete favorably against our products. The price and product development pressures that result from competition may lead to reduced profit margins and lost business opportunities in the event that we are unable to match the price declines or cost efficiencies, or meet the technological, product, support, software or manufacturing advancements of our competitors.
Our Performance Depends in Part on Our Ability to Enforce Our Intellectual Property Rights and to Develop and License New Intellectual Property.
Access to worldwide markets depends in part on the continued strength of our intellectual property portfolio. There can be no assurance that, as our business expands into new areas, we will be able to independently develop the technology, software or know-how necessary to conduct our business or that we can do so without infringing the intellectual property rights of others. To the extent that we have to rely on licensed technology from others, there can be no assurance that we will be able to obtain licenses at all or on terms we consider reasonable. The lack of a necessary license could expose us to claims for damages and/or injunction from third parties, as well as claims for indemnification by our customers in instances where we have a contractual or other legal obligation to indemnify them against damages resulting from infringement claims.
With regard to our own intellectual property, we actively enforce and protect our rights. However, there can be no assurance that our efforts will be adequate to prevent the misappropriation or improper use of our protected technology.
We benefit from royalty revenue generated from various patent license agreements. The amount of such revenue depends in part on negotiations with new licensees, and with existing licensees in connection with renewals of their licenses. There is no guarantee that such negotiations will be successful. Future royalty revenue also depends on the strength and enforceability of our patent portfolio and our enforcement efforts, and on the sales and financial stability of our licensees. Additionally,

10


consolidation of our licensees may negatively affect our royalty revenue. Royalty revenue from licensees is not always uniform or predictable, in part due to the performance of our licensees and in part due to the timing of new license agreements or the expiration and renewal of existing agreements.
A Decline in Demand in Certain Markets Could Have a Material Adverse Effect on the Demand for Our Products and Results of Operations.
Our customer base includes companies in a wide range of markets, but we generate a significant amount of revenue from sales to customers in the personal electronics market, particularly the mobile phone sector, and from sales to industrial customers. Decline in one of these markets could have a material adverse effect on the demand for our products and our results of operations and financial condition.
Our Global Operations Subject Us to Complex Laws, Regulations and Policies and Risks Associated with International Political, Economic or Other Conditions.
We have facilities in 35 countries worldwide. About 85 percent of our revenue comes from shipments to locations outside the United States; in particular, shipments of products into China typically represent a large portion of our revenue. Our global operations subject us to complex U.S. and foreign laws, regulations and policies relating to, for example, trade and export controls, anti-bribery, antitrust and privacy. Violations of or changes in these laws, regulations and policies could result in fines, penalties, and sanctions that could adversely affect our results of operations. Operating internationally also exposes us to political and economic conditions, security risks, health conditions and possible disruptions in transportation, communications and information technology networks of the various countries in which we operate. Any of these could result in an adverse effect on our business operations and our financial results. Additionally, in periods when the U.S. dollar significantly fluctuates in relation to the non-U.S. currencies in which we transact business, the remeasurement of non-U.S. dollar transactions can have an adverse effect on our results of operations and financial condition.
Our Results of Operations Could be Affected by Natural Events in the Locations in Which We or Our Customers or Suppliers Operate.
We have manufacturing, data and design facilities and other operations in locations subject to natural occurrences such as severe weather and geological events that could disrupt operations. In addition, our suppliers and customers have similar facilities and operations in such locations. A natural disaster that results in a prolonged disruption to our operations, or the operations of our customers or suppliers, may adversely affect our results and financial condition.
The Loss of or Significant Curtailment of Purchases by Any of Our Largest Customers Could Adversely Affect Our Results of Operations.
We generate revenue from thousands of customers worldwide. The loss of or significant curtailment of purchases by one or more of our top customers (including curtailments due to a change in the design or manufacturing sourcing policies or practices of these customers, or the timing of customer or distributor inventory adjustments) may adversely affect our results of operations and financial condition.
Our Results of Operations Could be Adversely Affected by Our Distributors’ Promotion of Competing Product Lines or Our Distributors’ Financial Performance.
In 2013, about 55 percent of our revenue was generated from sales of our products to distributors. Our distributors carry competing product lines, and our sales could be affected if our distributors promote competing products over our products. Moreover, our results of operations could be affected if our distributors suffer financial difficulties that result in their inability to pay amounts owed to us.
Our Results of Operations and Financial Condition Could be Adversely Affected if a Customer or a Distributor Suffers a Loss with Respect to Our Inventory.
We have consignment inventory programs in place for some of our largest customers and for some distributors.  If a customer or distributor were to experience a loss with respect to TI-consigned inventory, our results of operations and financial condition may be adversely affected if we do not recover the full value of the lost inventory from the customer, distributor or insurer, or if our recovery is delayed.


11


Incorrect Forecasts of Customer Demand Could Adversely Affect Our Results of Operations.
Our ability to match inventory and production with the product mix needed to fill orders may affect our ability to meet a quarter’s revenue forecast. In addition, when responding to customers’ requests for shorter shipment lead times, we manufacture products based on forecasts of customers’ demands. These forecasts are based on multiple assumptions. If we inaccurately forecast customer demand, we may hold inadequate, excess or obsolete inventory that would reduce our profit margins and adversely affect our results of operations and financial condition.
Our Performance Depends on the Availability and Cost of Raw Materials, Utilities, Critical Manufacturing Equipment, Manufacturing Processes and Third-Party Manufacturing Services.
Our manufacturing processes and critical manufacturing equipment, and those of some of our customers and suppliers, require that certain key raw materials, natural resources and utilities be available. Limited or delayed access to and high costs of these items could adversely affect our results of operations. Our products contain materials that are subject to conflict minerals reporting requirements. Our relationships with customers and suppliers may be adversely affected if we are unable to describe our products as conflict-free. Additionally, our costs may increase if customers demand that we change the sourcing of materials we cannot identify as conflict-free.
Our inability to timely implement new manufacturing technologies or install manufacturing equipment could adversely affect our results of operations. We subcontract a portion of our wafer fabrication and assembly and testing of our integrated circuits. We also depend on third parties to provide advanced logic manufacturing process technology development. A limited number of third parties perform these functions, and we do not have long-term contracts with all of them. Reliance on these third parties involves risks, including possible shortages of capacity in periods of high demand, the third parties’ inability to develop and deliver advanced logic manufacturing process technology in a timely, cost effective and appropriate manner and the possibility of third parties imposing increased costs on us.
Our Results of Operations Could be Affected by Changes in Tax-Related Matters.
We have facilities in 35 countries worldwide and as a result are subject to taxation and audit by a number of taxing authorities. Tax rates vary among the jurisdictions in which we operate. Our results of operations could be affected by market opportunities or decisions we make that cause us to increase or decrease operations in one or more countries, or by changes in applicable tax rates or audits by the taxing authorities in countries in which we operate.
In addition, we are subject to laws and regulations in various jurisdictions that determine how much profit has been earned and when it is subject to taxation in that jurisdiction. Changes in these laws and regulations could affect the locations where we are deemed to earn income, which could in turn affect our results of operations. We have deferred tax assets on our balance sheet. Changes in applicable tax laws and regulations or in our business performance could affect our ability to realize those deferred tax assets, which could also affect our results of operations. Each quarter we forecast our tax liability based on our forecast of our performance for the year. If that performance forecast changes, our forecasted tax liability will change.
Our Operations Could be Affected by Changes in Environmental, Safety and Health Laws and Regulations.
We are subject to environmental, safety and health laws and regulations in the jurisdictions in which we operate our business, particularly those in which we manufacture our products. If we fail to comply with these laws and regulations, we could be subject to fines, penalties or other legal liability. Furthermore, should these laws and regulations be amended or expanded, or new ones enacted, we could incur materially greater compliance costs or restrictions on our ability to manufacture our products and operate our business, particularly if such laws and regulations: require the use of abatement equipment beyond what we currently employ; require the addition or elimination of a raw material or process to or from our current manufacturing processes; or impose costs, fees or reporting requirements on the direct or indirect use of energy, or of materials or gases used or emitted into the environment, in connection with the manufacture of our products. There can be no assurance that in all instances a substitute for a prohibited raw material or process would be available, or be available at reasonable cost.
Our Results of Operations Could be Affected by Changes in the Financial Markets.
We maintain bank accounts, one or more multi-year revolving credit agreements, and a portfolio of investments to support the financing needs of the company. Our ability to fund our daily operations, invest in our business, make strategic acquisitions and service our debt obligations requires continuous access to our bank and investment accounts, as well as access to our bank credit lines that support commercial paper borrowings and provide additional liquidity through short-term bank loans. If we are unable to access these accounts and credit lines (for example, due to instability in the financial markets), our results of

12


operations and financial condition could be adversely affected. Similarly, such circumstances could also restrict our ability to access the capital markets or redeem our investments. If our customers or suppliers are unable to access credit markets and other sources of needed liquidity, we may receive fewer customer orders or be unable to obtain needed supplies, collect accounts receivable or access needed technology.
Material Impairments of Our Goodwill or Intangible Assets Could Adversely Affect Our Results of Operations.
Charges associated with impairments of our goodwill or intangible assets could adversely affect our financial condition and results of operations. Goodwill is reviewed for impairment annually or more frequently if certain impairment indicators arise or upon the disposition of a significant portion of a reporting unit. The review compares the fair value for each reporting unit to its associated book value including goodwill. A decrease in the fair value associated with a reporting unit resulting from, among other things, unfavorable changes in the estimated future discounted cash flow of the reporting unit, may require us to recognize impairments of goodwill. Most of our intangible assets are amortized over their estimated useful lives, but they are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of the asset may not be recoverable.  If the sum of the future undiscounted cash flows expected to result from the use of the intangible asset and its eventual disposition is less than the carrying amount of the asset, we would recognize an impairment loss to the extent the carrying amount of the asset exceeds its fair value.
Our Results of Operations Could be Affected by Warranty Claims, Product Recalls or Product Liability.

We could be subject to warranty or product liability claims or claims based on epidemic or delivery failures that could lead to significant expenses as we defend such claims or pay damage awards or settlements. In the event of a warranty claim, we may also incur costs if we decide to compensate the affected customer or end consumer. We maintain product liability insurance, but there is no guarantee that such insurance will be available or adequate to protect against all such claims. In addition, it is possible for one of our customers to recall a product containing a TI part. In such instances, we may incur costs and expenses relating to the recall. Costs or payments we may make in connection with warranty, epidemic failure and delivery claims or product recalls may adversely affect our results of operations and financial condition.
Our Continued Success Depends in Part on Our Ability to Retain and Recruit a Sufficient Number of Qualified Employees in a Competitive Environment.
Our continued success depends in part on the retention and recruitment of skilled personnel, including technical, marketing, management and staff personnel. There can be no assurance that we will be able to successfully retain and recruit the key personnel that we require.
Our Debt Could Affect Our Operations and Financial Condition.

From time to time, we issue debt securities with various interest rates and maturities. While we believe we will have the ability to service this debt, our ability to make principal and interest payments when due depends upon our future performance, which will be subject to general economic conditions, industry cycles, and business and other factors affecting our operations, including the other risk factors described under Item 1A, many of which are beyond our control. In addition, our obligation to make principal and interest payments could divert funds that otherwise would be invested in our operations, or cause us to raise funds through such means as the issuance of new debt or equity, or the disposition of assets.

Our Ability to Successfully Implement Business and Organizational Changes Could Affect Our Business Plans and Results of Operations.

From time to time, we undertake business and organizational changes, including acquisitions, divestitures and restructuring actions, to support or carry out our strategic objectives. Our failure to successfully implement these changes could adversely affect our business plans and operating results. For example, we may not realize the expected benefits of an acquisition if we are unable to timely and successfully integrate acquired operations, product lines and technology, and our pre-acquisition due diligence may not identify all possible issues and risks that might arise with respect to an acquisition. Further, we may not achieve or sustain the expected growth or cost savings benefits of business and organizational changes, and restructuring charges could differ materially in amount and timing from our expectations.


13


Our Operating Results and Our Reputation Could be Adversely Affected by Breaches of Our Information Technology Systems.

Breaches of our information technology systems caused by computer viruses, unauthorized access, sabotage, vandalism or terrorism could compromise our information technology networks and result in unauthorized release of our, our customers’ or our suppliers’ confidential or proprietary information, cause a disruption to our manufacturing and other operations, result in release of employee personal data, or cause us to incur increased information technology protection costs, any of which could adversely affect our operating results and our reputation.

ITEM 1B. Unresolved Staff Comments.
 
Not applicable.

ITEM 2. Properties.
 
Our principal executive offices are located at 12500 TI Boulevard, Dallas, Texas. The following table indicates the general location of our principal manufacturing and design operations and the reportable segments that make major use of them. Except as otherwise indicated, we own these facilities.
 
Analog
Embedded Processing
Dallas, Texas
X
X
Sherman, Texas
X
 
Houston, Texas
 
X
Tucson, Arizona(1)
X
 
Santa Clara, California
X
 
South Portland, Maine
X
 
Aguascalientes, Mexico(1)
X
 
Aizu, Japan
X
X
Miho, Japan
X
X
Tokyo, Japan(1)
X
 
Chengdu, China(2)
X
 
Shanghai, China(1)
X
X
Bangalore, India(2) 
X
X
Kuala Lumpur, Malaysia(2)
X
X
Melaka, Malaysia(2)
X
 
Baguio, Philippines(2)
X
X
Pampanga (Clark), Philippines(2)
X
X
Taipei, Taiwan(2)
X
X
Freising, Germany
X
X
Greenock, Scotland
X
 
________
(1) 
Leased.
(2) 
Portions of the facilities are leased and owned. This may include land leases, particularly for our non-U.S. sites.

Our facilities in the United States contained approximately 15.6 million square feet at December 31, 2013, of which approximately 0.8 million square feet were leased. Our facilities outside the United States contained approximately 11.4 million square feet at December 31, 2013, of which approximately 2.0 million square feet were leased.

At the end of 2013, we occupied substantially all of the space in our facilities.
 
Leases covering our currently occupied leased facilities expire at varying dates generally within the next 5 years. We believe our current properties are suitable and adequate for both their intended purpose and our current and foreseeable future needs.


14


ITEM 3. Legal Proceedings.

We are involved in various inquiries and proceedings regarding laws and regulations related to the protection of the environment. These matters involve various parties, including government agencies and, in certain cases, other potentially responsible parties. Although the factual situations and the progress of each of these matters differ, we believe that the amount of our liability, if any, will not have a material adverse effect upon our financial condition, results of operations or liquidity.

The Internal Revenue Code requires that companies disclose in their Form 10-K whether they have been required to pay penalties to the Internal Revenue Service for certain transactions that have been identified by the IRS as abusive or that have a significant tax avoidance purpose. We have not been required to pay any such penalties.

ITEM 4. Mine Safety Disclosures.
 
 Not applicable.


PART II

ITEM 5.
Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
The information contained under the caption “Common stock prices and dividends” in our 2013 annual report to stockholders, and the information concerning the number of stockholders of record at December 31, 2013, contained under the caption “Summary of selected financial data” in such annual report are incorporated herein by reference to such annual report.
 
The following table shows our repurchases of our common stock in the fourth quarter of 2013:

ISSUER PURCHASES OF EQUITY SECURITIES

Period
Total
Number of
Shares
Purchased
 
 
Average Price Paid Per Share
Total Number
of Shares
Purchased as
Part of
Publicly
Announced
Plans or
Programs(1)
 
 
Approximate Dollar Value of Shares that
May Yet Be
Purchased
Under the
Plans or
Programs(1)
 
October 1, 2013 through October 31, 2013
9,436,100
 
$
40.32
9,436,100
 
$
6.36 billion
 
November 1, 2013 through November 30, 2013
6,320,600
 
$
42.23
6,320,600
 
$
6.09 billion
 
December 1, 2013 through December 31, 2013
2,011,898
 
$
43.03
2,011,898
 
$
6.00 billion
 
Total
17,768,598
(2) 
$
41.31
17,768,598
(2) 
$
6.00 billion
(3) 
_______
(1) 
All purchases during the quarter were made under the authorization from our board of directors to purchase up to $7.5 billion of additional shares of TI common stock announced on September 16, 2010. On February 21, 2013, our Board of Directors authorized the purchase of an additional $5.0 billion of our common stock. No expiration date has been specified for these authorizations.

(2) 
All purchases during the quarter were open-market purchases.

(3) 
As of December 31, 2013, this amount consisted of the remaining portion of the $7.5 billion authorization authorized in September 2010 and the $5.0 billion authorized in February 2013.

ITEM 6. Selected Financial Data.
 
The information contained under the caption “Summary of selected financial data” for the years 2009 through 2013 in our 2013 annual report to stockholders, is incorporated herein by reference to such annual report.

15


ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
 
The information contained under the caption “Management’s discussion and analysis of financial condition and results of operations” in our 2013 annual report to stockholders is incorporated herein by reference to such annual report.
ITEM 7A. Quantitative and Qualitative Disclosures about Market Risk.

The information contained under the caption “Quantitative and qualitative disclosures about market risk” in our 2013 annual report to stockholders is incorporated herein by reference to such annual report.
ITEM 8. Financial Statements and Supplementary Data.
 
The consolidated financial statements of the company at December 31, 2013 and 2012, and for each of the three years in the period ended December 31, 2013, and the report thereon of the independent registered public accounting firm, on pages 1 through 37 of our 2013 annual report to stockholders, are incorporated herein by reference to such annual report.
The information contained under the caption “Quarterly financial data” in our 2013 annual report to stockholders is also incorporated herein by reference to such annual report.

ITEM 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.
 
Not applicable.

ITEM 9A. Controls and Procedures.
 
Disclosure Controls and Procedures
An evaluation as of the end of the period covered by this report was carried out under the supervision and with the participation of TI’s management, including its Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of TI’s disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that those disclosure controls and procedures were effective.
Internal Control over Financial Reporting

Management’s assessment of our internal control over financial reporting is contained under the caption “Report by management on internal control over financial reporting” in our 2013 annual report to stockholders and is incorporated herein by reference to such annual report.
The information contained under the caption “Report of independent registered public accounting firm on internal control over financial reporting” in our 2013 annual report to stockholders is incorporated herein by reference to such annual report.
ITEM 9B. Other Information.
 
Not applicable.

PART III

ITEM 10. Directors, Executive Officers and Corporate Governance.
 
The information with respect to directors’ names, ages, positions, term of office and periods of service, which is contained under the caption “Election of directors” in our proxy statement for the 2014 annual meeting of stockholders, is incorporated herein by reference to such proxy statement.
The information with respect to directors’ business experience, which is contained under the caption “Board diversity and nominee qualifications” in our proxy statement for the 2014 annual meeting of stockholders, is incorporated herein by reference to such proxy statement.

16


The information with respect to Section 16(a) beneficial ownership reporting compliance contained under the caption of the same name in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.
A list of our executive officers and their biographical information appears in Part I, Item 1 of this report.
Code of Ethics
We have adopted the Code of Ethics for TI Chief Executive Officer and Senior Finance Officers. A copy of the Code can be found on our web site at www.ti.com/corporategovernance. We intend to satisfy the disclosure requirements of the SEC regarding amendments to, or waivers from, the Code by posting such information on the same web site.
Audit Committee
The information contained under the caption “Committees of the board” with respect to the audit committee and the audit committee financial expert in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.
ITEM 11. Executive Compensation.
 
The information contained under the captions “Director compensation” and “Executive compensation” in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.
The information contained under the caption “Compensation committee interlocks and insider participation” in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

ITEM 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.
 
Equity Compensation Plan Information
The information contained under the caption “Equity compensation plan information” in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

Security Ownership of Certain Beneficial Owners and Management
The information that is contained under the captions “Security ownership of certain beneficial owners” and “Security ownership of directors and management” in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.
ITEM 13. Certain Relationships and Related Transactions, and Director Independence.
 
The information contained under the caption “Related person transactions” in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.
The information contained under the caption “Director independence” in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.
ITEM 14. Principal Accountant Fees and Services.
 
The information with respect to principal accountant fees and services contained under the caption “Proposal to ratify appointment of independent registered public accounting firm” in our proxy statement for the 2014 annual meeting of stockholders is incorporated herein by reference to such proxy statement.
PART IV

ITEM 15. Exhibits and Financial Statement Schedules.
 
(a) 1 and 2. Financial Statements and Financial Statement Schedules:

17


The financial statements are listed in the index on page 25 hereof.
3. Exhibits

Designation of
Exhibit in
this Report
Description of Exhibit
3(a)
Restated Certificate of Incorporation of the Registrant, dated April 18, 1985 (incorporated by reference to Exhibit 3(a) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(b)
Certificate of Amendment to Restated Certificate of Incorporation of the Registrant, dated April 16, 1987 (incorporated by reference to Exhibit 3(b) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(c)
Certificate of Amendment to Restated Certificate of Incorporation of the Registrant, dated April 21, 1988 (incorporated by reference to Exhibit 3(c) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(d)
Certificate of Amendment to Restated Certificate of Incorporation of the Registrant, dated April 18, 1996 (incorporated by reference to Exhibit 3(d) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(e)
Certificate of Ownership merging Texas Instruments Automation Controls, Inc. into the Registrant, dated March 28, 1988 (incorporated by reference to Exhibit 3(e) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(f)
Certificate of Elimination of Designations of Preferred Stock of the Registrant, dated March 18, 1994 (incorporated by reference to Exhibit 3(f) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(g)
Certificate of Ownership and Merger merging Tiburon Systems, Inc. into the Registrant, dated November 2, 1995 (incorporated by reference to Exhibit 3(g) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(h)
Certificate of Ownership and Merger merging Tartan, Inc. into the Registrant, dated June 21, 1995 (incorporated by reference to Exhibit 3(h) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(i)
Certificate of Designation relating to the Registrant's Participating Cumulative Preferred Stock, dated June 23, 1998 (incorporated by reference to Exhibit 3(i) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(j)
Certificate of Elimination of Designation of Preferred Stock of the Registrant, dated June 18, 1998 (incorporated by reference to Exhibit 3(j) of the Registrant's Annual Report on Form
10-K for the year ended December 31, 2011).
3(k)
Certificate of Ownership and Merger merging Intersect Technologies, Inc. with and into the Registrant, dated July 15, 1999 (incorporated by reference to Exhibit 3(k) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(l)
Certificate of Ownership and Merger merging Soft Warehouse, Inc. with and into the Registrant, dated September 23, 1999 (incorporated by reference to Exhibit 3(l) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(m)
Certificate of Ownership and Merger merging Silicon Systems, Inc. with and into the Registrant, dated December 17, 1999 (incorporated by reference to Exhibit 3(m) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(n)
Certificate of Amendment to Restated Certificate of Incorporation, dated April 20, 2000 (incorporated by reference to Exhibit 3(n) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(o)
Certificate of Ownership and Merger merging Power Trends, Inc. with and into the Registrant, dated May 31, 2001 (incorporated by reference to Exhibit 3(o) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(p)
Certificate of Ownership and Merger merging Amati Communications Corporation with and into the Registrant, dated September 28, 2001 (incorporated by reference to Exhibit 3(p) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(q)
Certificate of Ownership and Merger merging Texas Instruments San Diego Incorporated with and into the Registrant, dated August 27, 2002 (incorporated by reference to Exhibit 3(q) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).

18



Designation of
Exhibit in
this Report
Description of Exhibit
3(r)
Certificate of Ownership and Merger merging Texas Instruments Burlington Incorporated with and into the Registrant, dated December 31, 2003 (incorporated by reference to Exhibit 3(r) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(s)
Certificate of Ownership and Merger merging Texas Instruments Automotive Sensors and Controls San Jose Inc. with and into the Registrant, dated October 31, 2004 (incorporated by reference to Exhibit 3(s) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
3(t)
Certificate of Elimination of Series B Participating Cumulative Preferred Stock (incorporated by reference to Exhibit 3 to the Registrant's Current Report on Form 8-K filed June 23, 2008).
3(u)
By-Laws of the Registrant (incorporated by reference to Exhibit 3 to the Registrant's Current Report on Form 8-K filed July 18, 2008).
4(a)
Underwriting Agreement (incorporated by reference to Exhibit 4.1 to the Registrant's Current Report on Form 8-K filed May 23, 2011).
4(b)
Indenture (incorporated by reference to Exhibit 4.2 to the Registrant's Current Report on Form 8-K filed May 23, 2011).
4(c)
Officer's Certificate (incorporated by reference to Exhibit 4.3 to the Registrant's Current Report on Form 8-K filed May 23, 2011).
4(d)
Officer’s Certificate setting forth the terms of the Notes (incorporated by reference to Exhibit 4.2 of the Registrant’s Report on Form 8-K filed July 18, 2008).

10(a)(i)
TI Deferred Compensation Plan (incorporated by reference to Exhibit 10(a) to the Registrant's Current Report on Form 8-K filed January 7, 2009).(a)
10(a)(ii)
Amendment No. 1 to the TI Deferred Compensation Plan (incorporated by reference to Exhibit 10(a)(ii) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2009).(a)
10(a)(iii)
Amendment No. 2 to the TI Deferred Compensation Plan (incorporated by reference to Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended September 30, 2012).(a)
10(b)(i)
TI Employees Non-Qualified Pension Plan (formerly named the TI Employees Supplemental Pension Plan), effective January 1, 1998 (incorporated by reference to Exhibit 10(b)(i) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).(a)
10(b)(ii)
First Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan), effective January 1, 2000 (incorporated by reference to Exhibit 10(b)(ii) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).(a)
10(b)(iii)
Second Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan), dated June 21, 2002 (incorporated by reference to Exhibit 10(b)(iii) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).(a)
10(b)(iv)
Third Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan), dated July 16, 2002 (incorporated by reference to Exhibit 10
(b)(iv) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).(a)
10(b)(v)
Fourth Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan), dated November 21, 2003 (incorporated by reference to Exhibit 10(b)(v) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).(a)
10(b)(vi)
TI Employees Non-Qualified Pension Plan II (incorporated by reference to Exhibit 10(b) to the Registrant's Current Report on Form 8-K filed January 7, 2009).(a)
10(c)
Texas Instruments Long-Term Incentive Plan, adopted April 15, 1993 (incorporated by reference to Exhibit 10(c) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).(a)
10(d)
Texas Instruments 1996 Long-Term Incentive Plan, adopted April 18, 1996 (incorporated by reference to Exhibit 10(d) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).(a)

19



Designation of
Exhibit in
this Report
Description of Exhibit
10(e)
Texas Instruments 2000 Long-Term Incentive Plan as amended October 16, 2008 (incorporated by reference to Exhibit 10(e) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2008).(a)
10(f)
Texas Instruments 2003 Long-Term Incentive Plan as amended October 16, 2008 (incorporated by reference to Exhibit 10(f) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2008).
10(g)
Texas Instruments Executive Officer Performance Plan as amended September 17, 2009 (incorporated by reference to Exhibit 10.2 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended September 30, 2009).(a)
10(h)
Texas Instruments Restricted Stock Unit Plan for Directors, as amended, dated April 16, 1998 (incorporated by reference to Exhibit 10(h) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
10(i)
Texas Instruments Directors Deferred Compensation Plan, as amended, dated April 16, 1998 (incorporated by reference to Exhibit 10(i) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
10(j)
Texas Instruments Stock Option Plan for Non-Employee Directors, as amended, dated November 30, 2000 (incorporated by reference to Exhibit 10(j) of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2011).
10(k)
Texas Instruments 2003 Director Compensation Plan as amended October 16, 2008 (incorporated by reference to Exhibit 10(k) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2008).
10(l)
Form of Stock Option Agreement for Executive Officers under the Texas Instruments 2009 Long-Term Incentive Plan (incorporated by reference to Exhibit 10(l) to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2012).(a)

10(m)
Form of Restricted Stock Unit Agreement under the Texas Instruments 2009 Long-Term Incentive Plan (incorporated by reference to Exhibit 10(m) to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2012).(a)

10(n)
Texas Instruments 2009 Long-Term Incentive Plan as amended September 17, 2009 (incorporated by reference to Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended September 30, 2009).
10(o)
Texas Instruments 2009 Director Compensation Plan as amended December 2, 2010 (incorporated by reference to Exhibit 10 to the Registrant's Current Report on Form 8-K filed December 7, 2010).
10(p)
Agreement and Plan of Merger (incorporated by reference to Exhibit 2.1 to the Registrant's Current Report on Form 8-K filed April 4, 2011).
12
Ratio of Earnings to Fixed Charges(b)
13
Portions of Registrant's 2013 Annual Report to Stockholders incorporated by reference herein.(b)
21
List of Subsidiaries of the Registrant.(b)
23
Consent of Independent Registered Public Accounting Firm.(b)
31(a)
Rule 13a-14(a)/15(d)-14(a) Certification of Chief Executive Officer.(b)
31(b)
Rule 13a-14(a)/15(d)-14(a) Certification of Chief Financial Officer.(b)
32(a)
Section 1350 Certification of Chief Executive Officer.(b)
32(b)
Section 1350 Certification of Chief Financial Officer.(b)
101.ins
Instance Document
101.sch
XBRL Taxonomy Schema
101.cal
XBRL Taxonomy Calculation Linkbase
101.Def
XBRL Taxonomy Definitions Document
101.lab
XBRL Taxonomy Labels Linkbase
101.pre
XBRL Taxonomy Presentation Linkbase
(a) 
Management compensation plans and arrangements.
(b) 
Filed or furnished herewith.

20



“Safe Harbor” Statement under the Private Securities Litigation Reform Act of 1995:
 
This report includes forward-looking statements intended to qualify for the safe harbor from liability established by the Private Securities Litigation Reform Act of 1995. These forward-looking statements generally can be identified by phrases such as TI or its management “believes,” “expects,” “anticipates,” “foresees,” “forecasts,” “estimates” or other words or phrases of similar import. Similarly, statements herein that describe TI’s business strategy, outlook, objectives, plans, intentions or goals also are forward-looking statements. All such forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from those in forward-looking statements.

We urge you to carefully consider the following important factors that could cause actual results to differ materially from the expectations of TI or its management:

Market demand for semiconductors, particularly in markets such as personal electronics, especially the mobile phone sector, and industrial;

TI’s ability to maintain or improve profit margins, including its ability to utilize its manufacturing facilities at sufficient levels to cover its fixed operating costs, in an intensely competitive and cyclical industry;

TI’s ability to develop, manufacture and market innovative products in a rapidly changing technological environment;

TI’s ability to compete in products and prices in an intensely competitive industry;

TI’s ability to maintain and enforce a strong intellectual property portfolio and obtain needed licenses from third parties;

Expiration of license agreements between TI and its patent licensees, and market conditions reducing royalty payments to TI;

Violations of or changes in the complex laws, regulations and policies to which our global operations are subject, and economic, social and political conditions in the countries in which TI, its customers or its suppliers operate, including security risks, health conditions, possible disruptions in transportation, communications and information technology networks and fluctuations in foreign currency exchange rates;

Natural events such as severe weather and earthquakes in the locations in which TI, its customers or its suppliers operate;

Availability and cost of raw materials, utilities, manufacturing equipment, third-party manufacturing services and manufacturing technology;

Changes in the tax rate applicable to TI as the result of changes in tax law, the jurisdictions in which profits are determined to be earned and taxed, the outcome of tax audits and the ability to realize deferred tax assets;

Changes in laws and regulations to which TI or its suppliers are or may become subject, such as those imposing fees or reporting or substitution costs relating to the discharge of emissions into the environment or the use of certain raw materials in our manufacturing processes;

Losses or curtailments of purchases from key customers and the timing and amount of distributor and other customer inventory adjustments;

Financial difficulties of our distributors or their promotion of competing product lines to TI’s detriment;

A loss suffered by a customer or distributor of TI with respect to TI-consigned inventory;

Customer demand that differs from our forecasts;

The financial impact of inadequate or excess TI inventory that results from demand that differs from projections;

Impairments of our non-financial assets;

21



Product liability or warranty claims, claims based on epidemic or delivery failure or recalls by TI customers for a product containing a TI part;

TI’s ability to recruit and retain skilled personnel;

Timely implementation of new manufacturing technologies and installation of manufacturing equipment, and the ability to obtain needed third-party foundry and assembly/test subcontract services;

TI’s obligation to make principal and interest payments on its debt;

TI’s ability to successfully integrate and realize opportunities for growth from acquisitions, and our ability to realize our expectations regarding the amount and timing of restructuring charges and associated cost savings; and

Breaches of our information technology systems.


For a more detailed discussion of these factors see the Risk Factors discussion in Item 1A of this report. The forward-looking statements included in this report are made only as of the date of this report and we undertake no obligation to update the forward-looking statements to reflect subsequent events or circumstances.



22


SIGNATURE
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

 
TEXAS INSTRUMENTS INCORPORATED
 
 
By:
/s/ Kevin P. March
 
Kevin P. March
Senior Vice President,
Chief Financial Officer
and Chief Accounting Officer
 
 
 
 
 
 

Date: February 24, 2014

23



Each person whose signature appears below constitutes and appoints each of Richard K. Templeton, Kevin P. March and Joseph F. Hubach, or any of them, each acting alone, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution, for such person and in his or her name, place and stead, in any and all capacities in connection with the annual report on Form 10-K of Texas Instruments Incorporated for the year ended December 31, 2013, to sign any and all amendments to the Form 10-K, and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, each acting alone, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitutes or substitute, may lawfully do or cause to be done by virtue hereof.
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on the 24th day of February 2014.
 
Signature
 
 
Title
 
 
 
 
 
 
/s/ Ralph W. Babb, Jr.
 
 
 
 
Ralph W. Babb, Jr.
 
 
Director
 
 
 
 
 
 
/s/ Mark A. Blinn
 
 
 
 
Mark A. Blinn
 
 
Director
 
 
 
 
 
 
/s/ Daniel A. Carp
 
 
 
 
Daniel A. Carp
 
 
Director
 
 
 
 
 
 
/s/ Carrie S. Cox
 
 
 
 
Carrie S. Cox
 
 
Director
 
 
 
 
 
 
/s/ Ronald Kirk
 
 
 
 
Ronald Kirk
 
 
Director
 
 
 
 
 
 
/s/ Pamela H. Patsley
 
 
 
 
Pamela H. Patsley
 
 
Director
 
 
 
 
 
 
/s/ Robert E. Sanchez
 
 
 
 
Robert E. Sanchez
 
 
Director
 
 
 
 
 
 
/s/ Wayne R. Sanders
 
 
 
 
Wayne R. Sanders
 
 
Director
 
 
 
 
 
 
/s/ Ruth J. Simmons
 
 
 
 
Ruth J. Simmons
 
 
Director
 
 
 
 
 
 
/s/ Richard K. Templeton
 
 
 
 
Richard K. Templeton
 
 
Chairman of the Board; Director; President and
Chief Executive Officer
 
 
 
 
 
 
/s/ Christine Todd Whitman
 
 
 
 
Christine Todd Whitman
 
 
Director
 
 
 
 
 
 
/s/ Kevin P. March
 
 
 
 
Kevin P. March
 
 
Senior Vice President; Chief Financial Officer;
Chief Accounting Officer

24


TEXAS INSTRUMENTS INCORPORATED AND SUBSIDIARIES

INDEX TO FINANCIAL STATEMENTS
(Item 15(a))

 
Page
Reference to Portions of Annual Report as Set Forth in Exhibit 13
 
 
Information incorporated by reference to the Registrant’s 2013 annual report to stockholders (items below included herein as Exhibit 13)

 
Consolidated financial statements:
 
Income for each of the three years in the period ended December 31, 2013

1
Comprehensive income for each of the three years in the period ended December 31, 2013

2
Balance sheets at December 31, 2013 and 2012

3
Cash flows for each of the three years in the period ended December 31, 2013

4
Stockholders’ equity for each of the three years in the period ended December 31, 2013

5
Notes to financial statements
6
Report of independent registered public accounting firm
37
Report by management on internal control over financial reporting
38
Report of independent registered public accounting firm on internal control over financial reporting
39

Schedules have been omitted because the required information is not present or not present in amounts sufficient to require submission of the schedule, or because the information required is included in the consolidated financial statements or the notes thereto. 


25